 |
 |
 |
 |
|
|
 |
|
|
||||||||||||
|
Products Directory > Industrial Supplies > Cooling Towers >
FRP Cooling Towers
Products - 108
|
FRP Cooling Towers |
Displaying 1-49 of Total 108 Products Found |
Products
S S Foundry fiberglass cooling towers are developed from reinforced fiber glass and reinforced plastic (F.R.O) casing. Metallic parts of the tower are completely galvanized/ powder coated/ epoxy coated. The steel and wooden tower case results in corrosion resistance and reduction in dry rot problems.
Suitable to cool re-cycled water flow from 5M3/Hr to 500M3/Hr in different industries, our FRP cooling towers deliver 100% cooling efficiency. It causes difference in temperature due to uniform water flow over the wet deck and gives maximum cooling efficiency.
Highlighting Features
more...
The dry cooling towers designed by us are used for power generating & air compressor units, and along with this used for engine water cooling
applications. It consumes little water as compared with other towers, produced
by other companies high performance of towers results in reduced annual
operating cost.
Dry cooling towers are available in a single
unit, which can be provided in capacities of 100 kw to 1500 kw. These dry cooling towers
can even be multiplexed to attain many thousands of kilo watts. more...
Backed by sophisticated technology and engineering expertise, we manufacture premium grade cooling towers, that comply to international quality standards. These towers are available with sturdy FRP body to withstand corrosive environment. Based on Tons of Refrigeration (TR) selection, these can be fabricated as per client's specific requirements.
Salient Features:
• Compact and light weight
• Corrosion & weather resistant
• Induced draft counter flow designs
• Direct driven axial fans
• Uniform stationery type water distribution system
• Honey comb type PVC fills with large surface area with negligible resistance to air flow
• Maintenance down time is very low due to inspection window
• Trouble Free Operation
• Easy Installation
Application Areas:
• Air Conditioning and Refrigeration
• Induction Furnaces
• Process Cooling
• D. G. Sets
• Plastic Moulding Machine
• more...
Energy Efficient FRP/ Aluminium
With the assistance of our experts, we are able to manufacture and supply quality dry cooling towers. These are coil type dry cooling towers, which are used for high temperature applications, primarily for generators and process cooling fitted with energy efficient FRP fans. We offer the dry cooling towers in the size 10-1000 TR in a weight of 10-10000 Kg. We use FRP, ALU, MS, GI, PVC and Motor for manufacturing these dry cooling towers for a better efficiency and durability.
This type of Cooling Towers shall be used for different applications like gensets, compressors, Induction Furnaces and Electrical Heating Equipments. more...
Backed by a team of skilled professionals we are able to cater to various requirements of our clients in various industrial segments. We manufacture and undertake turnkey projects for cooling towers used in the industrial segments such as pharma & chemicals, pipe, soap, food & beverages, anodizing, multilayer and pp films industry. We use qualitative steel sheets, aluminum sheets, brass, alloys and nickel that are procured from the most certified vendors.
Some of the salient features include : more...
This is the packaged model industrial cooling tower. It is available from 7.5 Tr to 100 Tr. It is packaged model so you can just fix the inlet & outlet connection in your site no need of errection work at site.
FRP Cooling towers are withstand corrosion, resist water borne bacteria’s and organisms and it is light in weight, vertical induced draft counter flow design permits installation in any direction with freedom being round the air flow through the tower is more evenly distributed. Cooling tower casing is made of selected grade materials of Fiber Glass Reinforced Plastic & resins. Additional embossing is done for extra strength. FRP casings and basins are designed withstand severe vibration, high wind load and to resist corrosion. Honeycomb PVC fills are used for extended contact area having high heat transfer efficiency. The crossing of air & water streams in close proximaty, which creates a diffused turbulence conductive to evaporation & more...
Our FRP cooling towers are rectangular in shape with fixed distribution system through nozzles and can be installed in series of multi-cells.
Energy saving design high performance compactness and strudiness quick and easy installation trouble free operation.
Capacity: As per customer requirement. more...
Our range of used cooling towers is available in various capacities as per clients requirements. Procured from trusted sources, these cooling towers are widely acknowledged in several industries for rugged performance and high-end functionality. Along with this, we even provide forced draft, induced draft, natural draft, FRP, complete assembly along with motor and fan. more...
Our clients can avail from us an exclusive range of FRP forced draft type cooling towers that are manufactured using latest technology. Providing optimum performance, these cooling towers are acknowledged for being lightweight, easy to install and power saving. Owing to the outstanding efficiency of these forced draft type cooling towers, these are widely demanded for various industrial applications. more...
Cooling towers are heat removal devices used to transfer process waste heat to the atmosphere. Our range is completely fan less and is excellent in working. It is energy efficient cooling tower with very low maintenance. Assortment of cooling towers has following applications and features:
Applications :
more...
Our wide assortment of FRP cooling towers are used in different industries owing to the following salient features:
more...
Cooling Tower is an equipment which is used to cool & maintain the temperature of process hot water at a particular level. This operates on the principal of heat evaporative system HEVS. Our specialization lies in the manufacturing of these cooling towers, the highlight being that: "We provide Unique Life Time Fills" (10 years), on demand, which minimizes your time and recurring fills change cost. Our USP here stands for: The tower casing is made of FRP (fibre glass reinforces plastic) designed and protected from harmful UV sun rays.
The applications for these cooling towers, lie in the following areas: more...
We offer our clients with a precision engineered range of cooling towers that is designed in FRP counter flow designs so as to deliver optimum performance and achieve adequate heat transfer. These towers are provided with casing of structurally strong FRP material that makes them withstand various forces and impacts.
The physical aspects of the equipment comprise the following:
• Strong PVC honey comb design of the fills and drift eliminator ensures maximum heat transfer
• Uniform distribution throughout the fill area through stationary type water distribution system with branch pipes & PP spray nozzles
• Axial flow type fan made of cast aluminum alloy that is FRP bladed and is directly coupled to electric motor which saves from perennial headache of V-belt/gear drive
• Fan drive motor is TE, IP-55 weather proof, class F insulation
• Maintenance and periodical checking of various components of the tower are done through Inspection/access more...
We manufacture superior quality FRP Cooling Towers that are used for diverse industrial applications like Air conditioning, Refrigeration, Diesel generator set, blow molding machine and for cooling & heat exchange process. Our FRP Towers are available with different shapes and specifications for use in various industries. Our range of FRP Towers include Counter Flow Bottle Shape, Counter Flow Rectangular/ Square Shape, Fanless Induced Draft and Jet Type FRP.
more...
We provide high quality GEM cooling tower, which are of vertical induced draft counter flow design, ensuring uniform distribution of water and optimal transfer of heat. They are made of Fibre Reinforced Plastic(FRP) highly bonded with resin. Usage of FRP incorporates the product with features such as, high strength, chemical resistance, compatibility, part consolidation, incombustible, durability and exhibits good fatigue properties.
The tower casings are made of FRP and possess good structural strength to withstand high velocity winds. It is leak proof and hence avoids water spillage.
Other components included in this product are: Fill, Sprinkler, Nozzle, Axial Fan and motors, all of which are of high quality.
Our facilities include installation, service and maintenance of the cooling towers.
Our GEM cooling towers are used for applications such as: more...
We offer diverse spectrum of FRP Cooling tower that is available in various sizes. Our range is developed using supreme quality FRP. We cater our gamut to several industries with in the domestic region. Following are the salient attributes: more...
We offer an array of efficient cooling towers and water cooling towers that is specially designed and manufactured by us. These are much more efficient than forced draft counter flow design. Minimal use of power per cooling ton, these are our latest development that is used in the plastic technology. We use superior quality of FRP materials in the manufacturing process, that makes them resistant from damages and also prevent from corrosion and weather condition. With the help of draft design, these cooling towers consumes 50% less energy and it has the ability to cut city water and sewer bills by up to 97%. The method of recycling of water is a crucial factor in our models.
Our range of cooling towers and water cooling towers are offered in fiberglass reinforced plastics that helps in providing economic outdoor dissipation of heat picked up by water in air conditioning & refrigeration, compressors, diesel-engines and other water-cooled industrial or process heat more...
Our modular cooling towers optimizes the process and ensures the best production yield. These are used in electricity generating, petroleum refining, chemical processing, sugar, air-conditioning and refrigeration industry.
Features :
more...
We manufacture and supply bottle type precision engineered cooling towers that are used for different industrial purposes. These precision engineered cooling towers have Full FRP casing which ensure prolonged life and low maintenance of sprinklers. The salient features are as follows: more...
Our FRP Bottle Type cooling towers are of induced draft design, which is why these are more efficient than forced draft counter flow design. Using less power per cooling ton, our towers represent the latest development in the use of plastic technology. Using superior quality FRP materials in fabrication, we offer towers which have resistant to damages and also prevent corrosive effect of weather and chemicals. Our induced draft design consumes 50% less energy and it can easily cut city water and sewer bills by up to 97%, as water is re-circulated instead of being wasted. One can rely on our towers because our cooling tower provide dependable, trouble-free and satisfactory long-term service. Our cooling towers in fiberglass reinforced plastics provide economic outdoor dissipation of heat picked up by water in air conditioning & refrigeration, compressors, diesel-engines and other water-cooled industrial or process heat exchangers. more...
Our range of Rectangular / Square Shape FRP Cooling Tower is made up of high quality Fibre Glass Reinforced Plastic (FRP). These cooling towers consist of casing, PVC fill, Drift Eliminator, Sprinkler, Motor, Fan and Water Basin.
Applications: Our cooling towers find applications in: more...
FRP Cooling tower - PMT series bottle:
This is the packaged model industrial cooling tower. It is available from 7.5 Tr to 100 Tr. It is packaged model so you can just fix the inlet & outlet connection in your site no need of errection work at site.
FRP Cooling towers are withstand corrosion, resist water borne bacteria’s and organisms and it is light in weight, vertical induced draft counter flow design permits installation in any direction with freedom being round the air flow through the tower is more evenly distributed. Cooling tower casing is made of selected grade materials of Fiber Glass Reinforced Plastic & resins. Additional embossing is done for extra strength. FRP casings and basins are designed withstand severe vibration, high wind load and to resist corrosion. Honeycomb PVC fills are used for extended contact area having high heat transfer efficiency. The crossing of air & water streams in close proximaty, which creates a more...
We offer bottle shape industrial cooling tower. The specification of industrial cooling tower is given below :
Casing: Cooling Tower Casing is made of selected grade materials of tough
Fibre Glass Reinforced Polyester & resins, etc. Additional
embossing is done for extra strength in case of big cooling towers.
Fill: MUE's Honeycomb & ring type
P.V.C fills are used for extended contact area having a high heat
transfer efficiency. The crossing of air & water streams in close
proximity which creates a diffused turbulence conducive to
evaporation & efficient heat transfer.
Water
Basin: is completely leak proof
which avoids spillage & seepage of water. It is of deep sump
design to ensure maximum water level at all times & made up of
FRP with additional stiffening to take care of extra water weight.
However RCC basin is recommended for capacities 300TR and above.
Sprinkler: MUE's specially designed more...
We manufacture Industrial Cooling tower with parts fully galvanized or powder coated and are esthetically designed. The salient features are :
Salient Features:
more...
We bring for our clients a wide range of FRP forced draft type cooling towers. These towers are carefully designed so as to offer optimum performance. These cooling machines are power saving and easy to install. These cooling towers are FRP made and are light in weight. Due to their high efficiency, our FRP forced draft type cooling towers find their usage in various industrial applications. more...
We design and develop an ideal range of cooling towers that are efficient and long lasting. The cooling towers are manufactured from qualitative raw material. These operate on the latest technology and allow the mixing of water and air at the bottom of infill that provides maximum evaporation & heat transfer in the infill. Easy to install and operate, the cooling towers emit less noise and are easy to maintain. more...
FRP Angles are being used in producing cable trays and ladders. They are also used in different applications such as construction ,Road Side post installation,Electrical cross Arm etc.
Sizes are avilable and also can be be customized as per requiremnts
For more details please refer our website www.agnipultrusion.com We have newly development in Corner Angle for electrical Industry Size is 20 X 20 X10 mm and 50 X50 X6 mm
70X70x4 mm more...
The product is used in various industries and possesses following features:
more...
We offer to our clients technically advanced range of cooling towers which come precision engineered to provide superior cooling. Our cooling towers effectively use evaporation of water to reject heat from processes such as cooling the circulating water. They are mostly used in establishments like oil refineries, chemical plants, power plants and building cooling process.
We offer to our clients rectangular counter flow cooling towers which are known for their reliable performance and energy efficiency features. Extensively used in process technology industries, these towers are specifically suitable for varied applications including Water Cooled Compressors, Generators, Process Cooling, Induction Furnaces and many more.
Our company is also doing refurbishing work for industrial cooling tower and thus it increase its efficiency and capacity. We also offer up gradation of wet deck to improve cooling so as to extend the life of system and helps in the reduction of maintenance hassles.
Specifications:
more...
We provide Cooling Towers, which are rectangular in shape. Specially designed for high water flow rates because of its multi cell feature. A number of cells can be clubbed together forming multi cell Cooling Tower thus giving the end user performance and efficiency. These Cooling Towers also come in completely knocked down condition and are erected at site. more...
Square shape Induced Draft helps in good distribution of air. This induced draft square is makes no sound and are widely used in cooling process for better performance and efficiency.
Our range of Induced Draft are available in Square Shape. These induced drafts are quieter and compact. These facilitates low air speed at the air inlet resulting good distribution of air. The available range of our square shaped induces drafts is 5 TR to 500 TR in single cell.
Some advantageous feature of our range of products are:
• These cooling towers are easily upgraded and expendable due to modular construction.
• Fan-deck is part of FRP casing make it strengthen & unbreakable.
• Gravity water distribution is an additional feature that perform at low pump head that come out from rotating sprinkle system.
• The Cooling Tower is light in weight facilitating easy installation.
Cooling Towers are in Counter flow design to achieve optimum performance by Uniform water distribution and optimal heat transfer.
CASING
It is made of FRP segments and is structurally strong enough to withstand various forces and impact.
BASIN
FRP type with fittings viz, make up, overflow & drain connection. It is an optional feature.
Fan
The fan is of Axial Flow type, and is directly driven which saves from the perennial headche of V-belts / Gear drive. The fan blades are of Cast Aluminium alloy, and it is statically and dynamically balanced.
FRP Cooling Towers are Corrosion-free, Light-weight, Compact, Portable and very easy to install and maintain. They are truly a "Customer's Delight." more...
Our range of natural draft FRP cooling towers consumes no power and requires less maintenance so (100% Power Saver) These towers do not require any fan and PVC fills ensuring no spillage and low evaporation loss. Some advantageous features of our range includes: more...
We offer Customized FRP Cooling Towers as per the specific requirements of the clients. All our cooling towers are offered in the mentioned capacities, sizes and designs.
Paltech Fanless/Fill less/Jet type Cooling Tower are specially designed for giving ultimate performance with virtually no maintenance.
These Cooling Towers are based on the principal of transfer of heat from hot water to atmospheric air by arranging the both air & water to come in contact with each other in such a fashion that heat transfer is maximum.
The material of construction of these Cooling Towers is chemically treated wood for louvers. The distribution system is made up of GI/PVC and structure is of chemically treated wood. Specially designed Nylon/PP nozzles are used for achieving maximum efficiency. These towers are available with chemically treated wood, FRP coated MS Basin or without basin.
"Paltech" Cooling Towers has a vast range of models to suit different requirements. The capacity range is from 5 TR and onwards. NOTE : Dimensional & other engineering data available with proposal/quotation. more...
5 TR to 300 TR
In Round Bottle Shape (Umbrella shape), FRP construction, Counter flow, Mechanical Induced Draft Cooling Tower: more...
We can offer colling towers of capacity ranging from 2m3/HR to 1, 500m3/HR in single cell and above upto 15, 000m3/HR in m. more...
Our USP'S: 1. UV PROTECTED CASING:- The tower casing is made of FRP (Fiberglass reinforced plastic, designed & protected from harmful UV sun rays. 2. PVC FILLS:- Unique honey comb designed PVC (Polyvinyl chloride) Fills Provide enough surface area to cool hot water by surface heat transfer of air. 3. Corrosion Resistant:- FRP Casing, PVC Fills, Plastic Distribution pipes, hot dip/spray galvanized steel components makes the system corrosion free. Thus life of tower is enhanced. 4. Fan:- Fan are either FRP or cast aluminum and are aerodynamically balanced for best results. 5. IP - 55 Motor:- Our motor is of IP-55 standard, thus you don't need additional canopy for outdoor installation. 6. Long Life:- Our cooling tower casing & in fill are developed specifically, offers a superior quality fiberglass reinforced polyester, chemical resistance to corrosion, ultra violet radiation and thermal shock. Thus the range of usage varies, from air conditioning system, Cold storage
The Mihir Polacel XE cooling tower operates according to the crossflow principle. The hot water to be cooled is fed into a closed FRP distribution pan, having holes in the bottom to equally distribute water over the cooling tower PVC fill. By evaporation and direct contact the water transfers heat to the air which is sucked in by an axial fan. The cold water is collected in a FRP basin at the bottom of the tower for recirculation.
They are made of glassfibre polyester. It ensures long life and easy maintenance. A fan hood of glassfibre reinforced polyester ensures a smooth flow of the water-vapour saturated air towards the fan. The axial fan itself is made of cast aluminium and mounted directky to a low speed electrical motor, specially developed for use in very humid environments (IP 55).
The cooling tower fill is made of PVC sheets which are suitable for a maximum water temperature of 50 Degree C . The low pressure drop of the crossflow packing causes low energy more...
Cooling Towers
FRP Cooling Towers Unique - 03
We are manufacturing quality FRP cooling towers for different industries. Salient features of the product include:
more...
FRP cooling tower is available in induced draft counter flow design and we offer two different classes of FRP cooling tower like class 200 and class 400.
In fact under single cell configurations there are 5 models and in multi cell configurations there are 18 models.
Our brand of FRP cooling tower are corrosion resistant, light weight, specially designed and sustainable.
To manufacture this type of cooling tower materials we use:
more...
Design Concept * Superior Design and constant refinement have made FRP Cooling Tower. * The Tower Offers P.V.C. Fill pack and Sprinkler in a unique design maximises economy and efficiency. * Sprinkler and C.T. Fans to provide maximum cooling in a minimum plan area with lower-energy. * All material used in this tower are chosen specifically for cooling Tower application. Fan are Direct Driven is easily available. Thus the maintenance is kept to a minimum cost.
We offer cooling towers, power cooling tower and power saving cooling tower with various specifications include :
Power Saving
The tower has the unique feature of Natural Cooling with out the use of fan. This results in a direct saving in power consumption & maintenance cost saving required to run cooling fan & motor.
Strength & Stability
A built up modular structure design which is light weight coupled with good strength of FRP is used to give the last structural stability in the most adverse outdoor conditions. Cooling from 250c to 350c for input water temp. 400c to 800c.
Mist Filled Towers
The towers are co – current mistfilled and have no packings or fills hence they eliminate the requirements of regular cleaning maintaining & replacing
The Benefits
The above features highlight that our towers are 100% maintenance free with scientifically engineered design and construction more...
Category Matches
Related Trade Leads
|
|
We are offering frp cooling towers, pvc fills, sprinkler and amc. (Sell) |
|
|
Frp cooling tower:
we offer two different classes of frp cooling tower like class 200 and class 400.
* In fact under single cell configurations... (Sell) |
|
|
We are offering a wide range of cooling towers which include:-
- FRP Cooling Tower
- Dry Cooling Tower
- Fanless Cooling Tower
- Wooden Coolin... (Sell) |
|
We are offering an advanced range of cooling towers like:
- FRP Cooling Towers
- Timber Cooling Tower
- RCC Cooling Tower
* Features: Simple... (Sell) |
|
Offering diverse range of cooling towers and accessories like frp and
wooden atmospheric wind wet cooling towers, frp and wooden cross flow
mechani... (Sell) |
Tender Notifications
B2B Newsletter Subscription
