 |
 |
 |
 |
|
|
 |
|
|
||||||||||||
|
Products Directory > Industrial Supplies > Pipe Fittings & Flanges >
Flanges
Products - 1004
|
Flanges |
Displaying 1-50 of Total 1004 Products Found |
Products
Threaded Flanges are confined to special applications. Their chief merit lies in the fact that they can be assembled without welding this explains their use in extremely high pressure services, particularly at or near atmospheric temperature, when alloy steel is essential for strength and where the necessary post weld heat treatment is impractical.
Threaded Flanges are unsuited for conditions involving temperature or bending stresses of any magnitude, particularly under cyclic conditions, where leakage through the threads may occur in relatively few cycles of heating or stress; sea welding is sometimes employed to overcome this, but cannot be considered as entirely satisfaction. We offer following varieties of threaded flanges: more...
|
Amco Metal
  |
|
Standard: ASTM / ASME A/SA 182
Grade: F 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316TI, 316H, 316L, 316LN, 317, 317L, 321, 321H, 347, 347H, 904L.
Standard: ASTM / ASME SB 564 / 160 / 472
Grade: UNS 2200 (NICKEL 200), UNS 4400 (MONEL 400), UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600), UNS 6601 (INCONEL 601), UNS 6625 (INCONEL 625), UNS 10276 (HASTELLOY C 276), UNS 2201 (NICKEL 201), (ALLOY 20 / 20 CB 3) more...
We source our range of Duplex Steel Flanges from highly reputed manufacturers of the industry. Available in various grades, our range is able to cater to the requirements of diverse industries such as building & construction, shipping and engineering. These are also tested on various parameters to ensure that our clients get nothing but the best. The technical specifications of our range of Duplex Steel Flanges: more...
We are one of the leading manufacturers and exporters of a comprehensive range of flange that are offered in both standard and customized finishes. These find application in various industries such as chemical, petrochemical, pharmaceutical, pulp and paper mill, sugar and many others.
The use of qualitative grade of stainless steel helps in meeting the international standards. Our range of flanges is primarily used in hydraulic control systems for turbine generators, high-pressure ground support missile systems, nuclear & conventional power plant applications.
The main features of our range: more...
his flange is slipped over the pipe and then fillet welded. Slip-on flanges are easy to use in fabricated applications.
Stainless Steel : ASTM A 182, A 240
Grade : F 304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H,904L, Duplex stainless steel UNS S31803, 2205, Super Duplex stainless steel UNS S32750
Carbon Steel : ASTM A 105, ASTM A 181
Alloy Steel : ASTM A 182, GR F1, F11, F22, F5, F9, F91
Nickel Alloys : Monel 400 & 500, Inconel 600 & 625, Incolloy 800, 825, Hastelloy C22,C276
Copper Alloys : Copper, Brass & Gunmetal
Size : 1/8" NB TO 48"NB.
Class : 150#, 300#,400 #,600#,900#, 1500# & 2500 #. more...
|
Unisteel & Engineering Co. Pvt Ltd.
|
|
Nickel Alloy more...
|
Steel Tubes (India) Pvt. Ltd.
ISO 14001:2004 |
|
Flange Gasket is a low-pressure service gasket designed for electrical flange isolation and/or general sealing applications. In addition to provide electrical insulation, the gasket is excellent for electrically isolating flanges made of dissimilar metals or where prevention of flange face corrosion is desired. We also fabricate old-style fiberglass boiler gaskets for hand-holes and man-ways. We supply any size of spiral-wound gasket for modern boilers. more...
|
Western Rubbers India Private Limited
|
|
We trade in a range of alloy steel flanges that are available at industry leading prices. Procured from leading and well established vendors, our alloy steel flanges are used in varied applications.
Grades:
more...
|
Pearl Steel Industries
|
|
We manufacture high quality industrial steel flanges in variables sizes for different applications in waterworks, petrochemicals, refineries, chemical industry, construction works etc. These industrial flanges are manufactured from high quality metal in accordance with set industrial norms to provide the clients maximum satisfaction. These flanges are offered by us at most reasonable rates.
Range: 15 NB upto 600 NB in 150 LBS , 300 LBS, 400 LBS , 600 LBS , 900 LBS , 1500 LBS , 2500 LBS / Table 2.5 , Table 6 , Table 10, Table 16, Table 25, Table 40, Table 64, Table 160, Table 320, Table 400
Form: Slip On Flanges, Socket Weld Flanges, Blind Flanges, Lapped Flanges, Screwed Flanges, Weld Neck Flanges, Reducing Flanges, Spectacle Flanges, Slip On Boss Flanges, Plate Flanges, Plate Blank Flanges, Screwed Boss more...
|
Hitesh Steel, Mumbai
ISO 9001:2000 |
|
We provide our clients with various flanges such as SORF, SOFF, SOLJ, SWRF, SWFF, WNRF, WNFF, WNRTJ, LWNRF, BLRF, BLFF, Threaded, Spectacle Blind, Orifice & Studding Outlet. Manufactured as per ANSI Â B 16.9, B 16.28 & MSS SP-43, these can be provided to our clients in customized sizes and specifications as per their requirements
Standard: ASTM / ASME A/SA 182
Grade: F 44, F 45, F51, F 53, F 55, F 60, F 61. more...
|
CHIRANJIV STEEL CENTRE
|
|
Flanges more...
|
Ashtapad Overseas, Mumbai
|
|
ASTM A 182/ SA 240 TP 304, 304L 316, 347,321
ASTM A 105/ IS 2062, ASTM A350 L F2, F11, F22
Range : SORF, BLRF, SWRF, WNRF, Screwed
Class : 150, 300, 600, 900, 1200, 1500
Size : ¼'' TO 48''
Various types of flanges :
* Threaded Flanges
* WeldNeck Flanges
* Blind Flanges
* Slip On Flanges
* DIN Flanges
* Socket Welding Flanges
|
Ashapura Steel
|
|
We offer a wide range of Inconel Flanges like Slip On Flanges, Socket Weld Flanges, Blind Flanges, Lapped Flanges, Screwed Flanges, Weld Neck Flanges, Reducing Flanges, Spectacle Flanges, Slip On Boss Flanges, Plate Flanges, Plate Blank Flanges and Screwed Boss Flanges. Manufactured as per industrial standards, these are offered in following grades:
• Inconel 800 (UNS No. N08800)
• Inconel 825 (UNS No. N08825)
• Inconel 600 (UNS No. N06600)
• Inconel 625 (UNS No. N06625)
• Inconel 601 (UNS No. N06601) more...
|
Rajendra Piping & Fittings
|
|
Our range comprises of carbon steel flanges made of carbon and alloy steel. The specifications of carbon steel flanges are given as follows:
Carbon Steel: ASTM / ASME SA 182 F 304, 304L, 304H, 309H, 310H, 316, 316H, 316L, 316 LN, 317, 317L, 321, 321H, 347, 347 H.
Duplex Steel: ASTM / ASME SA 182 F 44, F 45, F51, F 53, F 55, F 60, F 61 more...
|
Regent Steel & Engg. Co.
|
|
We manufacture a wide assortment of industrial flanges made from high quality stainless steel and carbon flanges. Catering to the different requirements of our customer we offer industrial flanges that are high in precision and ensure durability.
more...
|
International Impex India
|
|
Blind Flange is use to closes the end of a pipe. Fabricated using finest quality of carbon steel, our range of blind plate flanges are widely used to close the ends of pipes, valves, pressure vessel openings and other channels where one end needs to be blanked off.
These blind flanges, blind plate flanges can be customized on varying parameters with the following specifications:
Stainless Steel: ASTM A 182, A 240
Grade: F 304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H,904L,
Duplex stainless steel UNS S31803, 2205, Super Duplex stainless steel UNS S32750
Carbon Steel: ASTM A 105, ASTM A 181
Alloy Steel: ASTM A 182, GR F1, F11, F22, F5, F9, F91
Nickel Alloys: Monel 400 & 500, Inconel 600 & 625, Incolloy 800, 825, Hastelloy C22,C276
Copper Alloys: Copper, Brass & Gunmetal
Size : 1/8" NB TO 48"NB. Class : 150#, 300#, 400 #, more...
|
Oswal Industries Limited, Mumbai
ISO 9001:2000 |
|
Our range of Nickel and Copper alloy flanges is manufactured in compliance with international quality standards and is available in various dimensions. These flanges are popular amidst the clients for durability and trouble free continuous performance. Our range of flanges are resistant to corrosion & abrasion, require less maintenance and are ideal for high temperature & pressure applications. We offer these flanges in host of sizes and thickness to fulfill the clients' demands. We ensure safe and hassle free delivery of these products within given time frame.
|
SLS Stainless Pvt.Ltd.
ISO 9001:2000 |
|
Engaged in manufacturing and exporting of stainless steel blind flanges, stainless steel flange etc.
Stainless Steel : ASTM A182 F 304/ 304L/ 304H/ 316/ 316L/ 317/ 317L/ 321/ 310/ 347/ 904L etc.
Carbon Steel : ASTM A105/ A694 F42/46/52/56/60/65/70/ A350 LF3/ A350 LF2.
|
Suresh Steel House
|
|
Our flanges are manufactured from high quality metal in accordance with set industrial norms to provide the clients maximum satisfaction. These flanges like steel slip on flanges, steel socket weld flanges are offered by us at most reasonable prices.
more...
|
Jignesh Steel, Mumbai
ISO 9001:2000 |
|
We offer the Hastelloy Flanges like; Slip on flange, socket weld flange, blind flange, lapped flange, screwed flange, weld neck flange, reducing flange, spectacle flange, slip on boss flange, plate flange, plate blank, as per the following grades:-
Grades as under:-
Hastelloy C-4 (UNS No. N06455), C-276 (UNS No. N10276), Hastelloy C 22 (UNS No. N06022), Hastelloy C 2000 more...
|
Metal Inox Mumbai India
ISO 9001:2000 |
|
Supplying and exporting qualitative range of industrial flanges, we offer our clients precision engineered industrial components with various shapes and pressure ratings. These industrial flanges are long lasting, shock proof and are designed with utmost precision and find application in food, chemical and pharmaceutical industries. Our flanges are available in following types:
• Steel flanges
• Raised face flanges
• Flat face flanges
• Steel raised face flanges
• Ring joint flanges
Available in standard dimensions, these can be customized as per client’s specifications and are highly corrosion and abrasion resistant.
|
Pragati Enterprises
|
|
We specialize in supplying a wide variety of stainless steel flanges & duplex steel flanges that are used in different industries. Built from superior grade stainless steel forging and bar, these stainless steel flanges and duplex steel flanges are offered with the following specifications: more...
|
L .G. Pipes & Tubes
|
|
These are blind flanges without bore and are used to shut off a piping system or vessel opening. These blind flanges also permits easy access to vessels or piping system for inspection purposes. Blind flanges can be supplied with or without hubs at the manufacturers option. Spectacle Blank (also called a Figure 8 Blank) This is a pressure retaining plate with one solid end and one open end connected with a web or tie-bar. In normal operation, the open end forms the seal between two flanges and permits normal flow of fluid through pipe work. If the solid end is swung into position it effectively blanks off the pipe and halts the flow. more...
|
Guru Gautam Steels
|
|
Forged & Plate Flange:-
Blind flange, Lapped Flange, Threaded Flange, Slipon Flanges, Weld Neck Flanges, Socket Weld Flanges.
Flange Material Wise:-
Titanium flanges, tantalum flanges, nickel flanges, cupro-nickel flanges, zirconium flanges, hastelloy flanges, incolloy flanges, niobium flanges, hr alloy flanges, alloy 20 flanges, monel flanges, inconel flanges, nimonics flanges, stainless steel flanges, duplex steel flanges, super duplex flanges.
Blind Flanges :
Specifications : ANSI B 16.5 from 1/2" to 24" and classes150 to 2500 (complete range)
Applications : Used in quick assembly to save the cost, these are also used in less strict requirements in terms of length of pipe section.
Slip on Flanges:
Specifications : ANSI B 16.5 from 1/2" to 24" and classes150 to 2500 (complete range)
Applications : Used in quick assembly to save the cost, these are also used in less strict requirements in more...
|
Reliable Pipes & Tubes Limited
|
|
Carbon Steel Flanges
Standard : ASTM / ASME A/SA 105 / 350 LF 2 / A 516 GR.70 / IS 2062
Alloy Steel Flanges
Standard : ASTM / ASME A/SA 182 / A 387
Grade : F5, F9, F11, F12, F22, F91.
more...
|
Amco Metal (Mumbai)
|
|
Nickel Alloy Flanges more...
|
Metalinox India
ISO 9001:2000 |
|
Flanges more...
|
Rajdeep Metals
|
|
Class 150 lb more...
|
Bluestar international , Mumbai
|
|
Carbon Steel Flanges
Standard: ASTM / ASME A/SA 105 / 350 LF 2
Alloy Steel Flanges
Standard: ASTM / ASME A/SA 182
Grade: F5, F9, F11, F12, F22, F91. more...
|
SUPERIOR STEEL INDUSTRIES, Maharashtra
|
|
The british standard flanges manufactured by us pertain to all standards like BS10 1962 Table D,E,F,H IS 6392 Table 5,17,26 IS 1538 in slip. These are manufactured using mild steel both in slip-on and blind type.
Socket Weld Flanges are similar to slip-on flanges, however, socket welds have an internal recess on the inside diameter to allow for a smoother flow of the process
fluid. The positive of this is that is creates a smooth bore with the proper welding and grinding. They are durable and are available with varied specifications.
We are engaged in manufacturing a wide range of Flanges. These are manufactured using A.S.A. pipes, M.S.S. stainless steel, backup stainless pipe and are in line with the industry standards. Moreover, these are fabricated using the benchmarks of 125 Lb, 150 Lb, 300 Lb, 600 Lb, 900 Lb, 1500 Lb, 2500 Lb, 3000 PSI, 5000 PSI & 10000 PSI standards.
Specifications:
more...
The SS flanges we manufacture have gained tremendous appreciation in the market for their host of qualitative features. These flanges are available in various specifications and types.
Technical Specifications:
more...
The wide collection of stainless steel flanges presented by us is highly strong and durable. These flanges find application in process industries and allied engineering industries and are provided in the following specifications:
more...
We are one of the renowned manufacturers of quality Nickel Alloy Flanges, which are popular amidst the clients for durability and trouble free continuous performance. We offer these nickel alloy flanges in varied sizes, length and thickness to fulfill the clients' demands.
Grades:
Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201),
Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500),
Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825),
Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625),
Inconel 601 (UNS No. N06601),
Hastelloy C 276 (UNS No. N10276),
Alloy 20 (UNS No. N08020),
Titanium (Grade I & II) Range: 15 NB upto 600 NB in 150 LBS , 300 LBS, 400 LBS , 600 LBS , 900 LBS , 1500 LBS , 2500 LBS more...
We manufacture flanges of different grades & standard ranges that comply with national & international standards. We generally use stainless steel to produce these flanges. We also fabricate them in pure nickel and many other metals moulded steel, brass and aluminum. our range of flanges can also manufactured as per the customer's requirement.
Manufacturing of fastners , flanges and fabrication items in
titanium material as per customer drawings.
We offer a wide range of fasteners that are fabricated from high grade titanium and widely used in various industrial usages. These fasteners are applicable generally in chemical processing and marine equipment components owing to their corrosion resistance feature. These are available in different type. more...
We offer to our clients a range of Flanges, which are procured from renowned vendors, all over the globe. These Flanges are offered in a variety of metals including, Stainless Steel, Carbon Steel, Alloy Steel, Nickel Alloys and Copper Alloys, such as Aluminum, Copper, Brass and Gunmetal. The Flanges can be availed in various types, including Weldneck, Slipon, Blind, Socket Weld, Lap Joint, Spectacles, Ring joint, Orifcase, Long Weldneck and Deck Flange. While the sizes range from ⅛ " NB TO 48"NB, the class varies from 150#, 300#, 400#, 600#, 900#, 1500# and 2500#. more...
We are one of the leading manufacturers of a wide
assortment of stainless steel flanges that are catered to numerous industries
for connecting various piping components and pipe sections. Our range of stainless steel flanges are also
customized as per the requirements directed by the clients.
Our array is widely appreciated owing to:
more...
SAE
flanges are manufactured in accordance with the specifications of SAE J518, using
either Code 61 or Code 62. Some of our stock flanges comprises of the
following:
more...
We are one of the leading manufacturer of screwed flanges in India, we can supply stainless steel,carbon steel and nickel alloy screwed pipe flanges, the method includes forging and casting. Also, we can produce as per your drawings and specifications. screwed flanges are available with following specifications :-
Stainless Steel : ASTM A 182, A 240
Grade : F304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H,904L,
Duplex stainless steel UNS S31803, 2205, Super Duplex stainless steel UNS S32750
Carbon Steel : ASTM A 105, ASTM A 181
Alloy Steel : ASTM A 182, GR F1, F11, F22, F5, F9, F91
Nickel Alloys : Monel 400 & 500, Inconel 600 & 625, Incolloy 800, 825, Hastelloy C22,C276
Copper Alloys : Copper, Brass & Gunmetal
Size : 1/8" NB TO 48"NB
Class : 150#, 300#,400 #,600#,900#, 1500# & 2500#
Standard
ANSI : ANSI B16.5, ANSI B16.47, more...
We are engaged in manufacturing and exporting a wide range of Forged Flanges as per the specific demands of our valued clients. These are available in weld neck, blind, lap joint, orifice, slip on, socket weld, spectacle blind and headed. Our range of flanges is checked for their higher temperature resistivity, dimension, shaper, strength, corrosion resistivity and various other features that ensure optimum quality in the final product.
The specification of Forged Flanges is given below:
more...
We manufacture and export industrial metal flanges. Our industrial metal flanges are rust-proof and scratch proof. more...
Our Copper Alloy flanges are extensively used in various industrial sectors such as Chemical Industries, Petrochemical Corporations, Pharmaceutical industries and others. These are available in various grades such as ASTM / ASME A/SA 182. and includes the following specifications:
(i) Types: more...
Slip on flanges A solid, circular pipe flange which is slipped over the end of a pipe and welded in.
We offer high quality slip on flanges that are manufactured stringently following latest technology. Precisely engineered, these slip flanges possess the following features:-
Stainless Steel: ASTM A 182, A 240
Grade: F 304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H,904L,
Duplex stainless steel UNS S31803, 2205, Super Duplex stainless steel UNS S32750
Carbon Steel: ASTM A 105, ASTM A 181
Alloy Steel: ASTM A 182, GR F1, F11, F22, F5, F9, F91
Nickel Alloys: Monel 400 & 500, Inconel 600 & 625, Incolloy 800, 825, Hastelloy C22,C276
Copper Alloys: Copper, Brass & Gunmetal
Size : 1/8" NB TO 48"NB.
Class : 150#, 300#,400 #,600#,900#, 1500# & 2500 #.
We manufacture and supply forged flanges that are being manufactured and supplied as per the desired specifications of the clients. These flanges find applications in plumbing and other industries. These forged flanges are manufactured using high quality raw materials such as stainless teel, mild steel and many more. A flange joint is a connection of pipes, where the connecting pieces have flanges by which the parts are bolted together.
Specifications: more...
We are engaged in the manufacturing and supplying of flanges and bushes for automobile sector. Our strong technical force delivers the right product at the right time, which solve the different purposes of various industries.
The threaded flanges that we manufacture comes in various classes, some of them are 150 LBS, 300 LBS, 400 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS
This flat face blind flanges are used to blank off pipelines, valves and pumps, it can also be used as an inspection cover. It is sometimes referred to as a blanking flange.
more...
We offer superior quality and precision engineered flanges. They are offered in various sizes and ratings, and allow quick fit-and-forget installation. We have the facility to customize it in accordance to clients’ specifications. We offer a comprehensive range of flanges made from high grade steel. Used in numerous industrial applications, we offer these flanges in various specifications of dimension in standard and customized forms. more...
Category Matches
Related Trade Leads
|
|
We are offering wide range of flanges. (Sell) |
|
|
Offering steel flanges including stainless steel flanges, carbon steel
flanges, forged steel flanges, alloy steel flanges, steel pipe flanges,
stee... (Sell) |
|
We are offering wide range of industrial flanges having following
features like:'
- Superior quality
- High grade raw material
- Easy fitting
... (Sell) |
|
|
Offering duplex flanges :
* ASTM / ASME SA 182 F 44, F 45, F51, F 53, F 55, F 60, F 61.
(Sell) |
|
|
We are manufacturing and supplying a wide range of asme code and non
code industrial flanges for the petrochemical, process, & waterworks
industrie... (Sell) |
Tender Notifications
B2B Newsletter Subscription
