 |
 |
 |
 |
|
|
 |
|
|
||||||||||||
|
Products Directory > Industrial Supplies > Magnets >
Ferrite Magnet
Products - 26
|
Ferrite Magnet |
Displaying 1-24 of Total 24 Products Found |
Products
We provide an effective range of Cow magnets that are used as a preventive veterinary product used against TRAUMATIC RETICULA PERITONITIS (popularly known as Hardware Disease). Cows while grazing tend to swallow lot of unwanted products which lead to this fearful disease. Owing to this disease cows lose appetite and also their milk output decreases.
Our Cow magnets help prevent this disease by attracting stray metal from the folds and crevices of the rumen and reticulum & hold them in tact so that they cannot move around and cause any type of injury to the animal. A balling gun is used to move the magnet into the stomach of the cow. The magnet remains there for at least and later it is expelled through the digestive tract. Cow magnets are available in various models such as: Stainless Steel & Food Grade PVC. The various sizes in which our cow magnets are available are:
• Stainless Steel Dia. 14mm x 76 mm Long
• Food Grade Plastic Dia 15 mm x 76 mm Long
|
Pragati Enterprises
  |
|
We provide our customized magnetic ferrites to our clients that are used for separation of iron particles from large volume liquid or semi liquid line flow systems. The metal so obtained from this filtration process separated is washed off till cleaned. The magnetic ferrites are easy to clean and also can be reinstalled without much of an effort.
|
Pragati Enterprises
|
|
Our company manufactures Ferrite Magnet by using strontium carbonate and iron oxide. These ferrite magnets are charcoal gray in color and usually appear in the forms of discs, rings, blocks, cylinders, and sometimes arcs for motors.
Attributes of Ferrite Magnets:
• High intrinsic coercive force
• Tooling is expensive
• Least expensive material compared to alnico and rare earth magnets
• Limited to simple shapes due to manufacturing process
• Lower service temperature than Alnico, greater than rare earth
• Finishing requires diamond cutting or grinding wheel
• Lower energy product than alnico and rare earth magnets
• Most common grades of ferrite are 1,5 and 8 (1-8 possible)
• Grade 8 is the strongest ferrite material available
Applications:
• Speaker magnets
• DC brush less motors
• Magnetic Resonance Imaging (MRI)
• Magnetos used on lawnmowers, and outboard more...
We offer Flameproof Electro Magnet, which are operated on 12 / 24 vdc, It is available in force of 600 lbs. It is suitable for gas group I, II A, II B. It can easily mounted on S. S. Doors or Aluminum Doors Features: • Resistant to demagnetization • Show less coercivity • Resistant to corrosion • Good temperature stability Applications: • Flameproof Products • Electronic inductors • Transformers • Computers • Loud speakers • In radar as absorbing particles • Industrial automation • Conveyor belts • Electric motors • Magnetic separators • Magnetic resonance imaging more...
Ferrite magnets are sintered permanent magnets and are composed of barium or strontium ferrite. This class of magnets has a good resistance to demagnetization and has the popular advantage of having a low cost. These ferrite magnets are very hard and brittle, and need special machining techniques and should be machined in an unmagnified state. Our unit is equipped to machine these materials as per required specifications. Having a low cost, Ferrite magnets have a wide application area, ranging from motors and loudspeakers to toys and crafts. They form the most extensively used permanent magnets today.
Manufacturing Methods:
Pressing and Sintering:
These ferrite magnets processes involve pressing very fine ferrite powder in a die and later sintering the pressed magnet. All the fully dense Ferrite magnets are manufactured in this manner. The ferrite magnets can also be wet or dry pressed. The method of wet pressing yields better magnetic more...
The noted features of our alnico magnets are their excellent temperature stability and their high residual induction. The materials used for the fabrication of these magnets are aluminum, cobalt, nickel, copper, iron, etc. The primary processes employed by us for manufacturing the alnico magnets include casting and sintering. The casting process gives the flexibility of molding the magnet into various shapes, of which horseshoe is a common shape, while the sintered alnico magnets offer comparatively better mechanical properties. Our alnico magnets commonly found their application in rotating machinery, sensing devices, meters, etc.
We offer wide range of driver unit ferrite magnets, which are electrically non-conductive magnets and consists of iron oxides like hematite, magnetite with traits of other metal oxides. These ferrite magnets have high permeability and in saturated state our range conduct a magnetic flux, which allows them to store stronger magnetic fields than iron. We supply these magnets according to the client's specifications and they are also economical in price.
Key Features : more...
These flexible rubber magnets (plasto ferrite magnets) are the composition of rubber (vinyl) and magnetic ferrite powder. These flexible rubber magnets have less magnetic energy product compared to other types. These flexible rubber magnets can be bent, twisted, coiled and easily fabricated. These flexible rubber magnets are widely used in toys, stationery, refrigerator door, micro motor, magnetic sealing, cupboard, etc.
Our wide range of injection bonded ferrite magnets is known worldwide owing to their high durability and utility. Fabricated from quality raw materials our ferrite magnets are used in various household, automobile and electrical appliances. We also offer customized solutions to our wide spectrum for our clients benefit.
Some of the salient features of our range are: more...
Fabricated from premium quality raw material, our impeccable range of industrial magnets are known for its impeccable finish and precise dimensions. Catering to the varied needs of the engineering industries, our range is highly acclaimed by our clients for : more...
Wiper Magnet of ferrite magnets are very hard and brittle. These ferrite magnets are available in various shapes and sizes like disc, ring, sleeves, flat, arc (segment), cylindrical, etc. These ferrite magnets are used for loud-speaker, rotor magnetos, wiper motor, DC motor, car fan, rail fan, dynamo, filter, display board, drain plug, electronic more.
TL:- OD/ID =+/- 2% TH=+/- 0.1
Size 49x39x30
49x39x25
As Per Costumer Requirement
Used in automobile industries & motor mfg.
more...
Ferrite magnets are mainly classified into two types - non oriented (isotropic) and oriented (anisotropic). All hard ferrite magnets are sintered permanent magnets composed of barium or strontium ferrite. Normally, all isotopic magnets are processed in dry pressing system and anisotropic magnets are in both dry and wet pressing systems. Isotropic magnets are non oriented magnets hence all magnetic particles are in different directions. These magnets can be magnetized in any directions. But the anisotropic magnets are oriented and all magnetic particles are in one directions. These magnets can be magnetized on orienting directions only.
Both type of ferrite magnets are very hard and brittle. These ferrite magnets are available in various shapes and sizes like disc, ring, sleeves, flat, arc (segment), cylindrical, etc. These ferrite magnets are used for loud-speaker, rotor magnetos, wiper motor, DC motor, car fan, rail fan, dynamo, filter, display board, drain plug, electronic more...
We offer a wide assortment of magnetic planning boards fabricated from colorful plastic cap and ferrite or rare-earth magnet. Available in various sizes and color our range is offered as per the client specific requirements.These magnetic planning boards are widely used for memo holder and office planning, widely accepted for : more...
Great general purpose ceramic magnet with north and south poles on opposite flat sides. Comes with a hole in the middle for easily.
Tl :- L/W =+/- 2% TH=+/- 0.1
Size - 19x19x10
20x20x4
20x20x5
20x12x8
25x11x6
30x20x6
40x20x6
40x25x6/10
As Per Costumer Requirement
Used in All industries requirements more...
Use of high quality raw materials such as Ferrite Powders, SiO2, Al2O3,
PbO, and many more in the production of our LS Ring Magnet ensures high
quality.
Tl :- OD/ID =+/- 2% TH=+/- 0.1
Size 72x32x10/12/13/15
91x36x15/17
100x57x15/17/20
As Per Costumer Requirement more...
Isotropic Ring Magnet LG Rings Remo Drum Muffle Ring (Assorted Sizes) What you get with Remo LG Rings (Assorted Sizes) (RMF10).
Tl :- OD/ID =+/- 2% TH=+/- 0.1
Size 36x18x6/8
45x22x8/9/10/11
53x24x9/10/11
60x32x10/12/13
As Per Costumer Requirement. more...
A thin arc ferrite segment magnet made of a rare earth sintered magnet
substantially comprising 28-33 weight % of R and 0.8-1.5 weight % of B,
the balance being substantially Fe, wherein R is at least one rare
earth element including Y, and T is Fe or Fe and Co, which has an
oxygen content of 0.3 weight % or less, a density of 7.56 g/cm3 or more, a coercivity iHc of 1.1 MA/m (14 kOe) or more at room temperature, and an orientation Br/4πImax of 96% or more in an anisotropy-providing direction at room temperature
can be produced by using a slurry mixture formed by introducing fine
alloy powder of the above composition into a mixture liquid comprising
99.7-99.99 parts by weight of a mineral oil, a synthetic oil or a
vegetable oil and 0.01-0.3 parts by weight of a nonionic surfactant
and/or an anionic surfactant.
Used In Automobile industries & Motor Mfg
TL:- OD/ID =+/- 2% TH=+/- 0.1
As Per Costumer Requirement more...
Ferrite High Power Disc Magnet
Ferrite magnets are sintered permanent magnets and are composed of Barium or Strontium Ferrite. This class of magnets has a good resistance to demagnetization and has the popular advantage of having a low cost. These are very hard and brittle, and need special machining techniques and should be machined in an unmagnified state. Our unit is equipped to machine these materials as per required specifications. Having a low cost, Ferrite magnets have a wide application area, ranging from motors and loudspeakers to toys and crafts. They form the most extensively used permanent magnets today.
Manufacturing Methods
Pressing and Sintering:
These processes involve pressing very fine ferrite powder in a die and later sintering the pressed magnet. All the fully dense Ferrite magnets are manufactured in this manner. The ferrite magnets can also be wet or dry pressed. The method of wet pressing yields better magnetic properties, but on the other hand poorer physical tolerances. The more...
Offering Ferrite Speaker Magnet. more...
Ferrite High Power Rectangle Magnet
Ferrite Low Power Rectangle Magnet
Ferrite Low Power Ring Magnet
Ferrite Low Power Disc Magnet
Category Matches
Related Trade Leads
|
Dear Sir, We are manufacturers of magnetite iron oxide having following
specification & Sizes : fe : +67 % actual reported fe : 69.23 % fe3o4 :
+95... (Sell) |
|
|
Offering to sell-
*Ferrite magnets
*Injection bonded ferrite magnets
*Bonded ferrite magnets
Features-
- Superior quality
- Available... (Sell) |
|
|
We are dealing in magnetic black iron oxide. (Sell) |
|
|
Offering Magnetite with following features :
Composition Fe3O4
Mohs Hardness : 5.5 - 6.5
Melting Point : 1538 (dec)
Density : 5.18.
(Sell) |
|
|
Offer to sell magnetic ferrites, ferrite ring magnet, magnetic
separators, suspension magnet, magnetic pulleys, magnetic plates,
magnetic grills, m... (Sell) |
Tender Notifications
B2B Newsletter Subscription
