 |
 |
 |
 |
|
|
 |
|
|
||||||||||||
|
Products Directory > Plant & Machinery > Plant & Machinery >
Feeding Machine
Products - 21
|
Feeding Machine |
Displaying 1-22 of Total 22 Products Found |
Products
We are involved in offering a wide range of Fuel Feeding Systems that are manufactured in compliance with the international standards. Fuel system differs greatly due to different performance of the aircraft in which they are installed.
The highlighting features of Fuel Feeding Systems more...
1. High-precision feeding: Aiming at the arrival of hi-tech industry, it is controlled by computer closed-circuit feedback system, So that the precision can maintain within_0.03mm.
2. Phase-style feeding function: it can input 20 groups fo different feeding length, each group provides punching for 999 times to satisfy the processing and production of special products(option.)
3. Manual model: it can input 3 phases manual speed, which can let used operate more easily and feed materials more accuracy.
4. High-efficiency release device: it can set up release angle quickly, only cam single of and adjusted feed thickness can done.
5. Feeding length setting: input feed length on the controller panel directly.
6. Feeding unit: The roll adopts middle-hollow style, being light and with low inertia for electroplate. The surface hardness HRC is 60� d chrome plated.
Material Feeder more...
COMP has developed Rapid Slurry Preparation Systems specifically to convert extremely hard material into uniform homogeneous slurry.
COMP uses Feed Conditioners to ensure smooth feed flow when the feed is sticky, hard cake or paste. Double Screw Paddle Mixers, Double Screw Feeders with cutter blades and Knife type Feed Dispensers are usually part of the standard fitment.
At COMP the selection of pumping unit depends on the specific feed properties. Pumps include Plunger Pumps, Hose Diaphragm Pumps, Metering Pumps and Homogenising Pumps.
Introducing the new age feeding system to fulfill the demands of creasing the production and decreasing the recurring expenses in sheet metal component making industry. Suku High Speed Gripper feeds have the perfect solution to problems of feeding medium and high speed press, due to its simple adjustment system and the precision of its movements and remarkable performance.
Features
1. Accurate and easy pitch adjustment.
2. Accuracy to the tume of + 25 microns, obtainable with piloting.
3. The Grippers are made out of carbide of give life ling service.
4. All rotating parts are fitted with antifriction bearings to give long life and reduced maintenance.
5. High speed of upto 650 strokes per minute.
We have developed the Air feeder Series by installing a special valve that increases the feeding speed. This Air Feeder Series is specially designed for the high production of small parts, especially when long feed strokes are needed.
Versatile
Coil stock can be fed in any direction or angle at any time during the machine cycle. A single feed can push or pull through long or short progressions.
A variety of stock widths and thicknesses can be fed at different speeds and feed lengths. Two or more strips can be simultaneously fed by the same feed.
We offer
a wide assortment of precision engineered auto feeding systems that are
manufactured using qualitative material sourced from trusted vendors. The
entire range has gained huge appreciation in the market for their exclusive
features such as durability, high performance and reliability. Different types
of auto feeding systems we offer encompass:
more...
We offer our clients with a range of automated system with feeders. These systems come with adjustable sensitivity and are vibration as well as shock proof. These feeding systems can be customized as per the client’s specifics requirements.
Some of the feeders offered by us are
more...
We manufacture fully rubber sheets feeding and sizing by automatic feeding and cutting machines. No manpower is required for this operations.
We
provides absolute solution of auxiliary items in the production of injection
molding by integrating all collected technologies, accurate and multifunctional
controlling units, and reliable systems. Our range also provides high
performance auto feeding system through deliberate cooperation with MORETTO in Italy.
more...
We bring to you Universal Milling Machines with automatic feeding arrangement in longitudinal, cross and vertical direction. It can select from different speeds in all geared models and automatic longitudinal feed in geared head models.
Spindle:
The milling spindle is fitted in two taper roller bearings. The different spindle speeds which are in geometrical progression are obtained by means of sliding gears, by which only such gears come into mesh which are necessary for the desired speed. All the gears run in oil bath, the wear thus being minimized.
Table:
The table has a strong cross section and a coolant groove, fitted with a strainer at the draining point. The table screw has gunmetal nut which minimizes wear and tear. The table screw is mounted on the thrust and ball bearing which also takes the axial load of the screw.
Knee:
The knee is well braced by internal partition walls giving the greatest stability in all respects. It has been carefully more...
Ruggedly designed M.S. Structure chases and M.S. Plate hopper body. Auxiliary conveyor with AC/DC variable speed drive under each bin. Option of oversize vibrator with drive - under each bin or common provided at discharge of collecting conveyor. Hopper body vibrator for sand and fines bin/s. Provision for add-on capacity by hopper extension. Weighing sensor (Load Cell) provided at discharge end of collecting conveyor.
Model: if - 300 / if - 600
Ingredient feeder, model if-300/if-600 are designed to add ingredients into the ice cream. ingredients feeding is done through product hopper & screw feeder with ac variable drive for adjustment of ingredient feeding quantity. ingredients are feeder is transferred ingredients to the flow of ice cream with the help of auto scrapper and then mixing of ice cream & ingredients is done in a vertical mixer. All contact parts are of ss - 304 or food grade material. Technical data drive details if-300 if-600
enrobing rotor 1. 0 hp ac variable drive 1. 0 hp ac variable drive
mixing auger 0. 5 hp 0. 5 hp
screw feeder 0. 5 hp ac
variable drive
0. 5 hp ac
variable drive
Dry nut hopper: 25 liter capacity. ff-300. c suitable upto: 300 liter freezer. ff-600. c suitable upto: 600 liter freezer.
SPECIALITY : more...
The auto feeders offered by us has high feeding speed. These are available in models such as AF-32, and AF-34. We can also customize our range in terms of feeding speed, motor capacity, and size of roller. The different varieties of models available with us are:
Auto Feeder Model AF-32
more...
For feeding continuous strip in synchronized, precise increments into power presses or other devices reciprocating machinery. Modern Automatic Press Feed Systems must cope with many material sizes and types. Width, thickness, pitdh, length, speed and accuracy, all affect design; whist power source and desirable flexibility govern the overall concept. Pneumatic powered systems have been the most universal type of feed because of their low cost and ease of fitting. But modern electronics have now bought the benefits of reduced cost and unsurpassed versatility to the electronic roll feed.
This highly precise auto-feed Vertical drilling machine with Hydraulic feed. Hard and ground pillars for stability. The drilling head of the machine tested for its best performance. It is perfectly suitable for mass production and second operation drilling single or multi holes after machining in CNC lathes and machining centers.
"T" slots in the table to clamp components in a better way. Increases production with consistency and almost 70% reducing the labor cost. The machine has the robust construction.
Multiple spindle drilling / tapping heads can be fixed in this drilling machines. Multiple spindle heads will increase the production as many spindle you add in head and also depends upon components. It can double or triple your drilling / tapping / reaming operations by simultaneously drilling countersinking, reaming or tapping two or more holes in one operation.
Multi-spindle heads have proved to be the most versatile method to drill / tap / ream in n numbers more...
SOFTRON Cored wire feeders are extremely versatile and reliable. The feeders can be used for wire injection in the ladel, ladle furnace, VD, VOD continuous casting, tundish and induction furnace. The feeder's offer. more...
Offer wire injection machine for various industrial uses. Our wire injection machine is design with unique feature of load cell based weighing system for comparison and accurate feeding.
Manufacture cored wire feeding system for various industrial uses. Our cored wire feeding system is design with unique feature of load cell based weighing system for comparison and accurate feeding. Cored wire feeding machine installed for VD.
Manufacture aluminium wire injection machine for various industrial uses. Our aluminium wire injection machine is design with unique feature of load cell based weighing system for comparison and accurate feeding.
Model No. SCS/WFM/DS/220
more...
Offer cored wire injection system for various industrial
uses. Our cored wire injection system is design with unique
feature of load cell based weighing system for comparison and accurate
feeding.
Model No. SCS/WFM/DS/040
more...
Category Matches
Related Trade Leads
|
We are offering exclusive range of wire feeder with the following
features like:
- Long lasting performance
- Highly durable and reliable
- Ava... (Sell) |
Tender Notifications
B2B Newsletter Subscription
