Products Directory > Electronics & Electrical > Power Generators & Alternators >
Electroplating Rectifiers
Products - 15
|
Electroplating Rectifiers |
Displaying 1-15 of Total 15 Products Found |
-
Products
- Description
- Supplier Information
Battery Chargers:
Secondary cells once exhausted, need to be charged by DC source having a voltage current characteristics to match the one specified by the battery manufactures. The mains supply voltage is stepped down and rectified by using a bridge connected rectifier to produce the desired output for charging the batteries. Output is adjustable within a limited range either in small steps, using one or more rotary switches or smoothly, using a VARIPAC - continuously variable voltage auto transformer. DC output is electrically isolated form AC input.
Specifications:
Battery chargers are designed and made to customer's individual specifications which vary widely. Broad specifications which cover most of the application are: more...- Suresh Electrical Industries
Rectifier is an equipment that converts AC into DC supply. Power make Silicon Rectifiers are widely used in Electroplating, Anodizing, Hydrogenation and all other electrochemical processes. These are tailor made, covering a wide range from 200 Amps to 15000 Amps at different output DC voltage as per requirement.
- Power Engineers And Consultants (Regd.), Ludhiana
Electroplating Rectifiers :
These are low voltage high current DC Power supplies, mostly working on 3 phase AC input. In exceptional cases, input can be single phase also.
Specifications :
The broad specifications are : more...- Suresh Electrical Industries, Mumbai
Plating Rectifiers
- Muskaan Engineers, Ludhiana
Brief Specification of electroplating rectifiers
Starting Circuitry
Rectifiers are designed for 3 phase 50 HZ Ac input supply and are available for operations at any voltage between 380 and 440 volts, covering a wide range of voltage fluctuations. It is recommended that the input to the rectifier should be connected through a proper protective device, to provide positive protection to personnel and the system, in the event of maintenance or in case a fault occurs.
DC Output Control
The function of the variable output controls is to control the voltage or current or its operating range by varying input voltage to the main transformer primary. The Dc output voltage variation is achieved steplessly 0-100% by means of an ON LOAD roller type POWER'S make voltage regulator.- Power Engineers and Consultants (Regd.)
POWER ENGINEERS bring you the finest products designed and engineered by the people who have been in the rectifier field for the last 35 years. Rectifier is an economical and most efficient method of obtaining DC from AC supply. POWER'S manufacture wide range of Rectifiers covering 0 - 500 Volts and upto 15000 Amps. capacity suitable for Electroplating, Anodising, Hydrogenation and many other electro-chemical processes. The entire manufacturing process is under one roof ensuring 100% quality control at every stage of production. We believe in quality, delivery, systems and competitive cost in our supplies.
- Power Engineers and Consultants (Regd.)
We bring electroplating rectifier sets that provide low voltage high current DC power supplies and mostly work on 3 phase AC input. These possess a capacity of up to 10, 000 Amps and an output ranges from zero to any value up to 400 V D.C. The input is about 415 V 3 phase 50 Hz AC. more...
- Suresh Electrical Industries
We manufacture electronic system of DC rectifier of plating plants which are used across various industrial segments. Our rectifiers are also highly durable and made with precision and attention to each and every intricate detail. All these electronic systems can also be made as per the drawings and specifications suggested by the client.
- Fricon Systems
We offer a wide range of electroplating rectifiers, which are used for converting alternating current (AC) to direct current (DC). These are also used for anodizing, hydrogenation and many other electro chemical processes. Further, our range is used in metal finishing industries for the following processes: more...
- Rama Machinery Manufacturing Industries
The electroplating rectifier with stepless control manufactured at our end consist of main transformer with a buck boost transformer, diode fittings and an output DC voltage controller. Our rectifier are wound with an electrolytic prime grade copper strip that minimize the power loss. Along with this, all the equipments are designed as per the capacity that makes them ideal to suit marginal overloading conditions and provide flawless functioning.
- Electrical Controls
We design and supply fully controlled static rectifiers as well as uncontrolled rectifiers for various applications, such as Electroplating, Etching, Anodizing, and more. We are capable to design rectifiers for different applications of varying capacity. With our experience and expertise of designing & manufacturing 10V/6000 Amps fully controlled rectifier for foil itching plants, we are capable to satisfy the various requirements of our clients.
We also offer AC/DC current injection test sets for testing of switch gear products with mV drop measurement. These injection test sets can also be used for testing AC Machines & their parts. Our AC/DC current injection sets are available in the capacities of up to 2000 Amps; in steps of 500 Amps.- Protech Engineering & Controls Private Limited
We offer wide range of rectifier, which is an economical and the most efficient method of obtaining D.C. from A.C. supply for electroplating, anodizing and many other electro-chemical processes. The widest applications in the field of electro-plating normally require maximum voltage at various current capacities as per requirement. Application of our rectifiers are:
• Electroplating
• Anodising
• Cleaning & other electrochemical processes
• Barrelling
• Etching
capacity: 10 Amp to 5,000 Amp- Metal Tech Delhi
Precision Electroplating Rectifiers are designed to provide Precisely controlled DC output for highly consistent Electroplating. The output voltage and output current (in CVC & CCC systems respectively) remain highly stabilized against AC Input Voltage variation from 170-270V and variation in job sizes. The system employs phase control technique using SCR's for control of output parameters.
more...- Sterling Systems
We are a trusted name in manufacturing rectifiers which are simple in operation and demand minimum maintenance. Our machine is used for Tin Plating, Nickel Plating, Copper Plating & Gold Plating.
Technical Specifications
more...- Mohite Electricals
Offering a highly durable range of electroplating rectifier to our clients, which are the most efficient method of obtaining DC from AC supply for anodizing, electroplating and certain other electro chemical processes. All the rectifiers are highly durable and precisely made to function efficiently in any conditions. We are also capable of manufacturing the range as per the drawings and suggestions given by our customers.
- Electrical Controls
