 |
 |
 |
 |
|
|
 |
|
|
||||||||||||
|
Products Directory > Electronics & Electrical > Power Transformers >
Dry Type Transformer
Products - 34
|
Dry Type Transformer |
Displaying 1-34 of Total 34 Products Found |
Products
Iron core dry type transformer are suitable for indoor installations in explosive atmospheric areas and populated locations such as malls, multiplex etc. These transformers have F or H insulation class with or without enclosure as per the site requirement.
Dupont Nomex insulating material is used to secure the windings in place during vacuum and pressure impregnation process with superior class of resin to suit highly humid / dusty atmosphere & free from fire hazard. The result is a coil that exhibits high short circuit protection due to the tightly bond conductors comparable to completely resin encased molded transformers at a substantially reduced cost.
Dry transformers are very compact in sizes and hence suitable for basement installations in high rise buildings etc. Dry type transformers are available with low losses giving savings over long service periods. Periodical vacuum cleaning of winding surface is the only maintenance. The more...
|
Urja Techniques India Private Limited, Mumbai
ISO 9001:2000   |
|
Dry Type Transformers more...
We offer a wide range of Dry Type Transformers that is manufactured using quality material. These are offered with voltage of about 1.1 Kv. The range of Dry Type Transformers are mainly used in Thermal Power Plants, Chemical Plants, Neuclear Plants, Shopping complexes, Housing societies, Hotels, high rise buildings and hospitals. Our clients can avail these in customized range as well in accordance to their specifications and requirements.
Principle behind Dry Type Transformer
It has LV winding and HV winding both HV and LV windings is vacuum poured. Both the HV and LV windings are poured in diffrent class of Varnish/ Resin which ensure that there are no air bubbles inside the winding.
Some of the salient features of Dry Type Transformers offered by us are: more...
We offer dry type power transformers that find extensive usage in applying varnish/ epoxy cast/resin. These dry type distribution transformer are manufactured from 5KVA to 1500KVA. Safe, efficient and requiring low maintenance, our dry type transformer is more reliable and easy to repair.
Some of the advantages of our range are as follows:
• High level of safety
• No flammable liquids
• Solution of pollution from leaks
• No toxic off-gases
• Can be placed close to the load
• More efficient
• Increased emergency overload capability
• Improved Reliability
• Low Noise and Low Maintenance
• Easy to repair (open coifs)
• Designed to be free of partial discharge
We are offering our clients with dry type transformer at highly competitive prices. These dry type transformer have Fin type radiators for better cooling efficiency and Paint shade as per IS / IEC standard.
The features are: more...
Three Phase Dry Type Transformer are manufactured upto 1000 KVA rating for Lighting, heating & distribution purposes. All the transformers are manufactured as per IS: Standards IS: 2026 whenever applicable. Sound levels are kept substantially low for quiet operation.
We manufacturer a 1Ph & 3Ph Resin Cast Transformer upto 11 KV / 200 KVA in class H/F insulation. LV & HV windings are embedded in resin.
more...
The CAST Resin Dry Type Transformers with On-load Tap Changer manufactured by us is offered up to 5000 KVA. These are Dry Type Transformers offered with On-load Tap Changer that enables them to handle the high and fluctuating load with ease. Further, we have been appreciated for its features such as quality, durability and temperature tolerance. Very high INSULATION up to 8 paper covering is of NOMEX paper is used.
Technical Specifications: more...
Avail from us bets quality dry type Transformes, which are used for stepping up power supply with minimum distortion in order to solve the chronic problem of low incoming voltage, that are being faced by diverse Industries. We offer these transformers in the capacity of up to 33kv with metal enclosure and porcelain bushing. Catering to the domestic as well as industrial needs, these transformers are most competitively priced.
Manufactured to meet the needs of clients, our range of dry type transformers are built in accordance with IS 2026/IS 11171 and IEC 726 standards. Built from cold rolled oriented grain steel, our products are widely used by many industries. Built by our team of technocrats, our range of transformers assure a low noise level. Our dry type transformers come with different accessories like rating and diagram plate, earthing terminal, skid under base, bidirectional wheels amounting to their wide demands, our transformers are available in different models like: more...
Our cutting edge technology enables us in
offering Cast-Resin Dry Type Transformers. These transformers are fabricated in
conformation to the international standards and offers low partial discharge
and high electric intensity, Flame resistance, high performance and low
maintenance.
Technical Characteristics:
more...
Ventilated dry type transformers offered by us are designed to provide totally maintenance free operations. These dry type transformers are also safe from fire as material used for manufacturing them are metals, ceramics, fibreglass and resin. As there is no usage of oil, these type of dry type transformers are also environment friendly.
Features: more...
We manufacture dry type transformers (V.P.I) industrial, substation & distribution up to 2 mva and 11 Kv with an cooling systems. more...
Dry Type Class 'H' Transformers for indoor Application Mainly Used in Chemical Plants, Fertilizer Plants, Oil Refineries etc.The enclosure is made as per customers requirment which is powder coated with bottom or top cable entry for smooth termination.
We offer a wide range of Dry Type Transformer that is available with ranges up to 2500 KVA (2.5 MVA). These are widely used in Shopping Complexes, Housing Societies, Hotels, High Rise Buildings and Hospitals to handle voltage fluctuations. Further, these are offered with OFF Circuit Tapping on-Link Board and on load tapping switch which makes these transformers durable and resistant to heat.
Technical Specifications: more...
Our range of Dry Type outdoor CT and PT up to 33kv is designed to increase power supply with minimum distortion to address the persistent problem of low incoming voltage which most industries come across. Offered in the range of up to 33kv with metal enclosure and porcelain bushing, these are useful in addressing the requirements of our domestic and international clients. more...
ESTAR make transformers with input and output voltage upto 3.3 KV single phase or 3 phase upto 200 KVA capacity suitable for 50 / 60 Hz supply. Low voltage transformers are also made suitable for other frequencies such as 400 Hz, ESTAR also makes special types of electronic low voltage transformers such as 3 phase to 2 phase transformers (Scot connected transformers) & 3 3 phase to 1 Phase transformer, within above voltage and power limits. These low voltage transformers are available in different thermal classes A, B, F, H & C.ESTAR Transformers confirm to IS 2026, IS11171, BS 171. Transformers are also made to confirm other national and intrnational standards against specific requirments. Electronic low voltage transformers are supplied either in open execution for incorporating in user panel or in sheet metal enclosures which are mostly for indoor application. For outdoor duty transformers are supplied in oil cooled construction. Oil cooled transformers are also prefered more...
We also offer a wide range of epoxy resin moulded, current transformers. These are also known as dry type transformers. These are manufactured by using vacuum mulding techniques. These dry type transformers are extremely capable to construct the core and grain-sloping silicon-iron. The ultimate result is a core in that all of the molecules are shaped with the direction of flux. Molecules not shaped with the magnetic flux direction boost up a core's unwillingness, debasing performance to the level of usual steel when the molecules are 90 degrees out of phase.
Specifications of dry type transformers are:
more...
We manufacture vacuum pressure resin impregnated dry type distribution transformers. The transformer is in general used near the load center so as to achieve better regulation & less distribution loss. These are Class 'F' & 'H' & 'C' insulated dry type transformers and are best suitable for application across: more...
We are a quality conscious organization offering a technically advanced range of Dry Type Transformers. These chokes are manufactured using quality raw material such as copper wires terminal blocks, which allows a magnetic field to form around the coil when the current flows through.
Our range is customized as per the specifications of our clients and is offered at competitive prices to our clients. more...
We are offering a range of Dry Type Transformers that are designed and manufactured using quality steel and latest technology. Offered in different specifications and models, these Dry Type Transformers are used for various industrial applications. To meet the specific requirements of our clients, we also offer customization facility based on the size and design of the transformers. Our range of Dry Type Transformers are also offered with cold rolled oriented grain with various accessories such as, earthing terminal and bidirectional wheels with low noise level. more...
Being heavy duty in nature, dry type transformers are ideal to use in various industrial conditions. Our range of ventilated dry-type transformers is available with air vents on them because of which they offer enhanced working life. We offer industry leading prices. more...
In view of the requirement
of Indian Industry, we are now introducing VOLTAMP Cast Resin
(Dry Type) Transformers. This introduction will supplement
our existing product viz. Vacuum Resin Impregnated Dry Type
Transformers. Dry Type Transformers of both the above varieties
are in use in the Indian Industry. To offer time proven designs
substantiated by reliable field experience we have entered
into Technical Collaboration with M/s. HTT, Hann Munden, Germany.
M/S. HTT are pioneers in the field of Cast Resin Transformers
manufacturing. They have been manufacturing Cast Resin Transformers
since 1959. Their range extends up to 16 MVA /36 KV. More
than 25,000, HTT Cast Resin Transformers are satisfactorily
working in the field comprising of wide range of more...
We offer, install and commission Oil filled power transformers upto 75 MVA, 132 KV, Oil filled distribution transformer upto 5 MVA, United Sub-station upto 1600 KVA, 11 KV, Cast resin dry type transformers upto 7.5 MVA, 33 KV, vacuum resin mprignated dry type transformers upto 5 MVA, 11 KV.
more...
We offer high efficiency 3 PH Dry Type transformer (Three Phase Dry Transformer) up to 200 KVA manufactured from premium quality lamination and electrolytic grade super enamelled/DFGC copper wire. more...
We offer imported range of dry distribution transformer for powering equipments for stabling voltages with good regulation capacity. Our range of dry distribution transformers have high accuracy and protecting overloading with current fold back limiting. This is available in various wattages. All these transformers are covered in sheet metals that are suitable for back panel mounting.
We offer a wide range of Dry Type Ventilated Transformer, integrated with VPI technology. These are available in power capacities varying from 22 KV up to 1.5 MVA. As these are heavy duty in nature, the transformers are ideal to used in varied industrial conditions. We ensure that our range is designed and manufactured as per various industry standards. Our team is also capable of customizing the entire range as per the specifications of the clients. The range that we offer is known to provide elevated performance, with the requirement of minimal maintenance. Our range of Cast Resin Dry Type Transformer is offered in standard designs and can also be customized to meet the specific requirements of our clients. The range that we offer to our nationwide clients varies from 22 KV to 1.5 MVA. Our range meets the demands of various urban and institutional requirements, owing to features like reliable performance and the requirement of negligible maintenance. We ensure that these more...
We provide a wide range of dry type transformers, engineered from optimum quality raw material such as copper. Our dry type transformers are widely used across various industries to automatically control the timing of the electrical appliances. Designed as per the international standard of excellence, our range can be availed as per the client specific requirements. Offered range is highly acclaimed by our clients for their durability, corrosion resistance and high tolerance.
Dry Type VPI Transformers are totally maintenance free and non-inflammable in the event of Short Circuit or Electric Arc. We are currently manufacturing upto 1000 KVA, 11 KV Class. These Transformers are Non-Hazardous with Low Noise Level and have better efficiency and Voltage Regulation. more...
Besides the above, we also manufacture Special Type Dual Output Transformers (recently exported to Africa), Neutral Transformers, Earthing Transformers, Isolation Transformers and other Transformers as per customer¿s requirement.
We provide a wide range of dry type transformers that are made using qualitative steel. These can be availed in different models and are used for various industrial applications.
Specifications more...
Distribution transformers Power transformers Induction Furnace transformers Submerged arc melting furnace transformers Dry Type transformers Automatic Step Voltage transformers Rectifier transformers Special type tailor made transformers etc. more...
Dry type transformers.
Features : more...
Category Matches
Related Trade Leads
|
|
We offer to sell dry type transformer, industrial dry type transformer
and electrical dry type transformer. (Sell) |
|
We offer dry type transformer, power transformer, low power transformer,
three phase transformer, low voltage transformer, variable voltage
transfo... (Sell) |
|
We are authorized distributor of power & distribution transformer
- Currentaly we have ready stock oil & dry type transformer 11/0.433 KV .
- 160... (Sell) |
|
|
We offer for sale dry type transformer at highly competitive prices.
These dry type transformer have Fin type radiators for better cooling effici... (Sell) |
|
|
We are offering comprehensive range of transformers like:
- Distribution Transformer
- Furnace Transformer
- Rectifier Transformer
- Power Tra... (Sell) |
Tender Notifications
B2B Newsletter Subscription
