Products Directory > Medical Products > Orthopedic Equipment & Supplies
DHS Plates
Products - 77
|
DHS Plates |
Displaying 1-46 of Total 77 Products Found |
-
Products
- Description
- Supplier Information
-
-
The Dynamic Hip Screw is designed to provide strong and stable internal fixation of a variety of inter-trochanteric, subtrochanteric and basilar neck fractures, with minimal soft tissue irritation. The DHS Plates are made of 316L stainless steel and are cold-worked for strength. The Dynamic Hip Screw Plate System combines the strength of ASTM F-621 stainless steel with a low profile barrel/plate junction designed to reduce soft tissue impingement and irritation. An anatomically contoured plate helps ensure a snug fit through the entire length of the bone/plate interface. A wide selection of sizes, barrel/plate angles, and screw hole configurations provide the versatility to use the system in a variety of indications, including intracapsular, intertrochanteric, and subtrochanteric fractures with extension into the piriformis fossa (Winquist Type III comminuted fractures). Dynamic compression holes in the side plate allow
* Angulation of 4.5 mm more... -
Biotek Chetan Meditech Pvt. Ltd.Ahmedabad
-
-
We offer our clients with the performance centric D.H.S. Barrel Plate. Our plates are made to last long and are used to fix a wide array of bone fractures. This product is made up of the best quality of steel and other special raw material. Our D.H.S Barrel Plate is produced keeping in mind the various complexities this product faces. Smooth finish of this product is one aspect our clients stress upon and Bombay ortho takes their clients recommendations very seriously. We provide our product in accordance to the global industrial set standards.
D.H.S. Barrel Plate, DCP holes and Round Holes
Cat. No.
Size:
* Barrel Length : 25 MM /38MM
* 125° - 2 holes to 16 holes
* 130° - 2 holes to 16 holes
* 135° - 2 holes to 16 holes
* 140° - 2 holes to 16 holes
Catalogue No.:
* 307S.125.2 to 307S.125.16
* 307S.130.2 to 307S.130.16
* 307S.135.2 to 307S.135.16
* 307S.140.2 to 307S.140.16
Variation: D.H.S more... -
Bombay Ortho IndustriesRajkot
-
-
Our expertise allows us to offer premium quality DHS Barrel Plate Gliding Holes (Safety-Lock) to our clients. These products are available in a thickness of 6 milli meters, width 19 milli meters and 16 Milli meters hole spacing. It is broadly used in for intertrochanteric fractures, sub-trochanteric fractures, mid cervical and low sub-capital fractures of the femoral neck.
DHS (Dynamic hip screw) are primarily indicated for intertrochanteric fractures. It also finds application in sub-trochanteric fractures, mid cervical and low sub-capital fractures of the femoral neck.
Technical Specification :
* Thickness-6mm
* Width-19mm
* Hole-spacing-16mm
Item Code Holes 172.04 4 172.05 more... -
Raj Surgical WorksDelhi
-
-
Angel : 125, 130, 135, 140Length : 4 Hole to 12 Hole more...
-
Sky SurgicalsRajkot
-
-
The D.H.S. Barrel Plate, L.C.D.C plates & D.H.S. Barrel Plate offered by us are mainly used for the repair of ulna and radius fractures. Our D.H.S. Barrel Plate are fabricated using best grade raw material to ensure reliability and durability. Safe to use, these can be availed in different sizes and variations.
D.H.S. Barrel Plate, Round Holes
Cat. No.:
Size:
* Barrel Length : 25 mm
* 125° - 2 holes to 16 holes
* 130° - 2 holes to 16 holes
* 135° - 2 holes to 16 holes
* 140° - 2 holes to 16 holes
Catalogue No.:
* 307S.125.2 to 307S.125.16
* 307S.130.2 to 307S.130.16
* 307S.135.2 to 307S.135.16
* 307S.140.2 to 307S.140.16
Variation : D.H.S Barrel plate, round holes more... -
Sigma Surgical Pvt LtdAhmedabad
-
-
We are manufacturing company of orthopedic implants and instruments in India.The firm name Samay Surgical is established in 1998 and also well-known manufacturer company, exporter and suppliers of different types of screws and plates and also instruments. All the implants are made by using S.S.316L and also TITANIUM according to the requirement of customers. more...
-
Samay SurgicalRajkot
-
DHS Barrel Plates
Item Code : 101-102-103-104-105
Angle : 130o 135o 140o 145o 150o
Size : 2 H - 18 H more... Apothecaries Sundries Manufacturing Company New Delhi
We are a leading manufacturer and exporter of a wide range if DHS & DCS instruments. These are customized as per the specifications of our clients and are in wide demand across the globe. Our products are widely demanded due to higb hygiene and are in wide demand amongst the surgeons of leading hospitals.
HIB Surgicals Mumbai
The Dynamic Hip Plate (DHS) offered by us has been designed for providing strong and stable internal fixation for various applications in intertrochanteric, subtrochanteric and basilar neck fractures, while causing minimal soft tissue irritation. The various specifications of the DHS Bone Plates on various parameters are:
Strongness
* The DHS Plates are made using 316L stainless steel and are cold-worked for strength.
Stability
* The number of screw holes per plate length is maximized, without compromising plate strength, allowing an increased number of fixation points with a smaller incision.
* DCP holes in the side plate allow angulation of 4.5 mm Cortex Screws, for lag screw fixation of medial fragments, and also tolerate axial compression and multiple-screw fixation of the main fragment in subtrochanteric fractures with shaft more...Samay Surgical Rajkot
We are engaged in offering a wide array of DHS Plate that caters to the needs of various hospitals across the country. These have achieved a great accolades in the industry due to the features like excellent finishing and latest designs. Further, these are effectively used in various orthopedic surgeries. more...
Orthosut Biomedical & Engineering Mumbai
-
DHS Plates more...
Apothecaries Sundries Mfg. Co. New Delhi
-
We are involved in manufacturing and exporting a wide range of trauma products. Our range includes Locking bone plates, Locking bone screws, Simple bone plates, Simple bone screws, Interamedullary nails. Our range is widely used for various medical and orthopedic procedures. Our company holds a team of qualified professionals that are involved in the manufacture of superior quality Orthopedic Products. All our products are thoroughly checked and tested on various required parameters to meet the required medical standards.
MATRIX MEDITEC PVT. LTD. Ahmedabad
Clients can avail from us a wide range of LCP/LC-LCP Large Fragment DHS & DCS Barrel Plates. These plates are manufactured at our premises, which is well equipped with the advanced technology & machines. Owing to this, our products are highly reliable and effective in the eyes of clients. These products are widely appreciated for the following characteristics by the valuable patrons:
* Safe to use.
* Smooth finish.
* Optimum quality.
more...Greens Surgicals Private Limited Vadodara
We are engaged in offering a wide array of DHS Plate that caters to the needs of various hospitals across the country.These locked plating and orthopedic locking plate offer a construct that resists angular collapse while simultaneously acting as an effective aid to fracture reduction.
Sanjana Impex Surat
The clients can avail from us a superior range DHS & DCS Plates & Screws. These products are manufactured in compliance with the set standards of the industry employing advanced precision engineering. Notable for their longevity, effective designs, corrosion resistance and other suitable features, these are widely used across medical sector. The DHS Plates are available in: Round Hole & D.C.P. Hole DHS Holes: 4 Hole to 14 Hole D.C.S. Plate Available In Round Hole & DCP Hole DCS Holes: 4 Hole To 12 Hole D.H.S./ D.C.S. Screws Length: 50mm to 110mm
Satakshi Orthopedic Works Ghaziabad
S 29 more...
Genius Ortho Private Limited Rajkot
The Dynamic Hip Plate (DHS) offered by us has been designed for providing strong and stable internal fixation for various applications in intertrochanteric, subtrochanteric and basilar neck fractures, while causing minimal soft tissue irritation. The various specifications of the DHS Bone Plates on various parameters are:
Strongness
* The DHS Plates are made using 316L stainless steel and are cold-worked for strength.
Stability
* The number of screw holes per plate length is maximized, without compromising plate strength, allowing an increased number of fixation points with a smaller incision.
* DCP holes in the side plate allow angulation of 4.5 mm Cortex Screws, for lag screw fixation of medial fragments, and also tolerate axial compression and multiple-screw fixation of the main fragment in subtrochanteric fractures with shaft more...Active Surgical Rajkot
Our superior varieties of DHS Barrel Plates are highly popular in the market and are offered at astounding rates. We strictly check them on ISI parameters before final dispatch. Plus, these are highly corrosion resistant, durable, have long lives and are precisely engineered to suit clients’ needs. more...
Medicor New Delhi
With DCP dynamic compression hole & Round holes and slot for tension device. Fixation With 4.5 mm cortical screws. For pertrochanteric and intertrochanteric fractures.
Specifications: more...Mark Medi Systems Ahmedabad
Type: Orthopaedic Implants
DHS Plate available in:
* Round Hole & D.C.P hole
* DHS holes: 4 hole to 14 hole
* D.C.S Plate available in round hole & DCP Hole
* DCS holes: 4 hole to 12 hole
* D.H.S / D.C.S screws length: 50mm to 110mm
more...Dynamic Ortho Industries Mumbai
We are involved in the manufacture of a wide range of DHS/DCS instrument & implants known for their quality. This range includes many products such as DTH triple, DCS angle guide, coupling screw shaft, and DHS or DCS Direct measuring device. The designing of the plating system is done in such a way that it provides extra stability while maintaining primary and secondary reduction during the process of preserving of periosteal blood supply. This is done by lowering the compression generated below the plate. We have the following range of DHS and DCS instruments:
* DHS/DCS Triple Reamer
* Guide Shaft
* DHS/DCS Impactor
* DHS/DCS Centring Sleeve Short
* DHS/DCS T-Handle with Quick Coupling
* DHS/DCS Centring Sleeve Long
* DHS/DCS Angle Guide
* DHS/DCS Direct Measuring Device
* DHS/DCS Wrench
* Coupling Screw Shaft
* Coupling Screw Long more...Premier Surgical Company, Arjun Nagar New Delhi
-
DHS Plate more...
New Life Surgical Works New Delhi
With the expertise of the professionals, we have been successful in designing and developing DHS/DCS Implants. For manufacturing of these long lasting products, we utilize graded alloys and latest in line machines. These are packed in quality material before the final delivery of the product takes place. The clients can avail product at affordable rates and in bulk quantities. Some technical specifications are as follows:
DHS Plates
Thickness
5.8 mm Width 19 mm Hole Spacing 16 mm External Barrel dia 12.6 mm Barrel Length 38 mm Short Barrel Length 25 mm
DCS Plate
more...Goods Orthopaedic Delhi
We are one of the reputed companies that manufacture a wide array of Dhs Plate 125 deg.-150deg. more...
Cortex Medical Inc. Chandigarh
We offer our clients with the performance centric D.H.S. Barrel Plate. Our plates are made to last long and are used to fix a wide array of bone fractures. This product is made up of the best quality of steel and other special raw material. Our D.H.S Barrel Plate is produced keeping in mind the various complexities this product faces. Smooth finish of this product is one aspect our clients stress upon and we take the clients recommendations very seriously. We provide our product in accordance to the global industrial set standards. more...
Avdhoot Mediequip Vadodara
LCP DHS Plates (dynamic hip screw) are primarily indicated for intertrochanteric fractures. It also finds application in sub-trochanteric fractures, mid cervical and low sub-capital fractures of the femoral neck.
Royal Medimed Company Mumbai
-
-
With DCP dynamic compression holes and slots for tension device
Fixation with 4.5mm cortial screws.
For pertochanteric and intertrochanteric fractures. Thickness-5.8mm
Width-19.0mm
Hole Spacing-16.0mm
OuterBarrelDiameter-12.6mm
Barrel Length-38mm
ShortBarrel Length -25MM more... -
Siora Surgicals Private Limited New Delhi
-
-
Implant Set For Dhs And Dcs more...
-
Medical International, New Delhi New Delhi
We are engaged in offering a wide range of DCS & DHS implants that is available at competitive prices. Made from high grade steel, these implants are precision made in different sizes and dimensions. These DCS & DHS implants are highly used in various orthopedic Surgeries with affectivity. The precise construct of our range of DHS & DCS Implants, makes it best for healing of broken and fractured bones. Our range of product includes:
* DHS short barrel plate
* DHS plate 135°
* DCS plate 95°
* Hip screw
* Compression screw
more...Ace Ortho Care Private Limited New Delhi
Our company is engaged in executing a range of DHS/DCS Plates to various hospitals across the country. These Screws have achieved great accolades in the market due to the finishing and the latest designs. These are highly used in various orthopedic Surgeries with affectivity.
Specifications:
* 1200- 1450 X 4HOLES – 20 HOLES DHS PLATES
* 950 X 4HOLES – 20 HOLES DCS PLATES
* DHS /DCS CORTICAL SCREW 50MM – 110 MM
more...Saviour Orthotech Private Limited New Delhi
-
-
Offering DHS plates with following specification: * Available in round hole and DC hole.* Barrel length: 25mm and 38mm.* Thickness: 6. 0 mm.* Size: 125, 130, 135, 140.* Hole: 4 hole to 16 hole. more...
-
Bone Touch Orthopaedic System Vadodara
-
-
We are manufacturing the DHS plate.
-
DCL Impex Ludhiana
-
-
we offer high quality dhs / dcs implants more...
-
Wintech Medica Chennai
-
-
Suitable for: trochanteric fracture of femur screw: 5. 0 mm & 12. 5 mm profile : 19. 5 mm x 6. 0 mm distance between hole: 18 mm more...
-
Sharma Pharmacuitical.Private Limited Vadodara
-
-
D.H.S.Plate
-
Orthocare & Cure (I) Pvt.Ltd Kolhapur
-
-
Detailed Product Description
Application:
For Pertrochanteric & intertrochanteric Fractures
Features:
Self Compressing holes with Spherical gliding
End of holes with Slot tention device
Standerd barrel 38mm & Fixation With 4.5mm screw
Size:
4, 5, 6, 7, 8, 9, 10, 11, 12 Hole more... -
D4 Surgicals (India) Private Limited Mumbai
-
-
D.H.S. Barrel Double Angled Plates Dcp Hole-120 Digree more...
-
R S Medicals Ludhiana
-
-
Distal Humerus Safety Locking Plate 2.7/3.5mm, Dorsolateral With Lateral Support - Left & Right more...
-
Narang Medical Ltd. ( Orthopedic Division) New Delhi
The clients can avail from us a superior range DHS & DCS Plates & Screws. These products are manufactured in compliance with the set standards of the industry employing advanced precision engineering. Notable for their longevity, effective designs, corrosion resistance and other suitable features, these are widely used across medical sector. The DHS Plates are available in:
* Round Hole & D.C.P. Hole
* DHS Holes: 4 Hole to 14 Hole
* D.C.S. Plate Available In Round Hole & DCP Hole
* DCS Holes: 4 Hole To 12 Hole
* D.H.S./ D.C.S. Screws Length: 50mm to 110mm
more...Shree Jagdish Ortho Implant Bhayandar
-
-
Dhs Plate (Long & Short Barrel) more...
-
Unique Ortho System Pvt. Ltd. Vadodara
-
-
Angle : 130o 135o 140o 145o 150o
Size : 2 H - 18 H more... -
New Life Surgical Works New Delhi
-
-
Adopting the latest technology and high quality raw material, we are fundamental in creating an advanced range of LC - D.H.S. barrel plates. These plates are available in different sizes and degrees as per the DHS. We also customize as per the specific requirements of the clients and deliver them within stipulated time.
Our range comprises: more... -
GPC Medical Ltd. New Delhi
The superior quality DHS-DCS barrel plates with fixation screw manufactured at our end are made as per ISO standards that provide them flawless quality. These products are made with stainless steel and titanium that provide them longer life.
Some of the specifications of our product range include:
* Holes Available - 4 hole to 18 hole with 1 hole difference
* DHS Angles - 120/130/135/140/150°
* DCS Angles - 95°
* Osteotomy Angle - 120°
more...Ortholine Meditech New Delhi
We manufacture a wide range of DHS barrel plate, which is made from high raw material and is available in different sizes and dimensions as per clients’ requirements. Acknowledged for features such as application specific design and dimensional accuracy, these are used in various sectors such as hospitals, surgical units and orthopedic clinics. more...
Auxein Medical New Delhi
-
-
We manufacture special locking plates, which is specifically used in orthopedic operative measures. These locked plating and orthopedic locking plate offer a construct that resists angular collapse while simultaneously acting as an effective aid to fracture reduction. By combining locking screw holes with compression slots, the plates can be used as both locking devices and fracture compression devices. Below are the variety of locking plates offered by us:
* Locking Metaphyseal Plate 3.5 - 4.5 - 5.0mm
* Locking Reconstruction Plate Round Hole 31.5mm
* Locking Reconstruction Plate (DC Hole-31.5mm)
* Locking Distal Femoral Plate
* Locking L- Buttress Plate
* Locking DHS Plate (DC Hole) etc......
more... -
NRV Traders Ahmedabad
Category Matches
» DCP Plates
» DCS Barrel Plates
» Locking Plates
» Medical Supplies
» Orthopedic Implants
» Orthopedic Instruments
» Other Medical Supplies
» Surgical & Medical Consumables
» Surgical Implants
Related Trade Leads
|
|
Dhs Plates : We are presenting a range of D.H.s Plates in
superior xl quality dhs, hip screws and Plates in round and dc Holes
manufactured f... (Sell) |
|
|
Offering dhs Barrel Plate for Child.We are indulged in providing
specialized dhs barrel plate for child, fabricated from superior quality
of raw ma... (Sell) |
|
|
We are engaged in manufacturing and supplying of the wide variety of
bone plates, which includes high quality of dhs barrel plate for adult.
These ... (Sell) |
|
|
Offering dhs Plates : DHS
Plates : dhs Locking Plates , Barrel Length : Long 38 mm , Short
25 mm , Size 4 Holes to 16 Holes . (Sell) |
|
|
We are manufacturing complete range of bone plates: D.H.S.PLate
Titanium. dhs plate s/b, l/b 135° x 4, 5 6 hole (Sell) |
Free Tenders from India
Tell suppliers exactly what you need
B2B Newsletter Subscription