 |
 |
 |
 |
|
|
 |
|
|
||||||||||||
|
Products Directory > Plant & Machinery > Dryers & Evaporators >
Desiccant Air Dryers
Products - 10
|
Desiccant Air Dryers |
Displaying 1-10 of Total 10 Products Found |
Products
DESIGN PARAMETER: 100% RH, Inlet Temp. 40 deg. C Operating Pr. 16 bar Max. However units for higher-pressure up to 150 bar can also be supplied.
WORKING PRINCIPLE: Regenerative Desiccant Compressed Air Dryers are an economical process to reduce the moisture content of the compressed air to achieve the dew point as low as minus 80 deg C. The dry Compressed Air ( at consistent ) dew point is continuously achieved by using Twin Towers packed with desiccant. While one tower is on-stream- drying the compressed air, passing small percentage of dry air is regenerating the other. The cycle is repeated at pre- set interval. DEW POINT: up to minus 80 deg. C While one tower is on-stream- drying the compressed air, passing small percentage of dry air is regenerating the other. The cycle is repeated at pre-set interval.
DEW POINT: - upto minus 80°C
FEATURES:
more...
Our finished desiccant compact air dryers are available under the Comp series. These are wall mounting type models which are easy to install and maintain. Some of the important features of our finished compact desiccant air dryers are as following: more...
Why Air Dryer Is Needed?
Compressed air is an ideal energy
source for many production process. Trouble free & operationally
safe production is achieved by dry & clean air.
Compressed air leaving a
compressor & after cooler is saturated with moisture, dust, oil
(in lub, compressor & other particles) which is responsible for
major problems i.e. Moisture washes away lubricants
there by increasing wear & tear for expensive pneumatic
instruments. Moisture from sticky emulsion with
did, scale & oil, plug precision orifices resulting in shutdown. Corrosion of pipe lines &
pneumatic instruments.
In
process industries, moisture can react chemically or contaminate the
product by forming unwanted compound. By installing MARINE Air Dryer in the compressed air
system moisture related problems can be eliminated.
Salient Features
more...
We offer a complete range of refrigerated air dryers that is one of the most common type of industrial dryers. These dryers are extensively used to remove liquids or moisture from bulk solids, powders, and sometimes even liquids by evaporation and sublimation processes.
Our range finds application in following industries:
more...
CD100 Packets Dry Air Desiccants are of 100 gram desiccant packet capable of absorbing 150 gms of water from air at any humidity levels. Long Lasting and lint free packing. Contains no Silica Gel. Low expenses compared to silica gel.
CD1000HS Dry Air Container Desiccants are of one kg Hanging desiccant strip capable of absorbing 1500 gms of water from air at any humidity levels. This can be easily hang inside the walls of the containers and suitable for all cargoes. Long Lasting and lint free packing. Contains no Silica Gel. Low expenses compared to silica gel.
Our finished desiccant air dryer are acknowledged for their efficiency and uninterrupted performance. These are manufactured by assembling standard components. We offer two types of desiccant air dryer whose features are described separately as following:
Desiccant Air Dryer (HLN Series)
more...
SALIENT FEATURES » Power on light.
» On - Off switch
» Tower pressure guages
» Highly accurate motorized cam timer.
» Differential pressure guage for filters.*
» PLC*
» Cycle failure indication*
» Sized to save heat of adsorption - minimizes purge air usage.
» Limited velocities through tower prevent bed fluidization - stops desiccant dusting.
» Large desiccant bed - ensures sufficient contact time to produce -40° C Dew point (-80 ° C Dew point with Molecular sieves)
» Uses bulk desiccant - no special cartridges required.
» Can be offered for higher pressure and lower dew points also.
Fill and drain ports more...
Dessicant air dryers
Why Dry Air? A compressor takes in atmospheric air loaded with contaminants and moisture. At 23.9?C / 75?F and 75% relative humidity, a 500 SCFM/850 NM?/HR air compressor takes in about 340.6 litres of water in vapour form during a 24-hour period. An after cooler condenses about half. As the air flows from the compressor into the distribution lines, it cools. The vapour condenses causing rust, scale, and ultimately leaks in pipes, valves, instruments, and air-operated tools and equipment. Moreover, when exposed to freezing temperatures, the moisture in airlines will freeze and restrict airflow. A typical MHTPL dryer pays for itself in less than a year by reducing and eliminating maintenance costs and downtime. Clean, dry air makes your operation more productive As long as compressed air is not exposed to temperatures below the temperature the air was cooled to in the dryer (the dew point temperature), no troublesome liquid will form in downstream air lines and equipment. Dry air keeps more...
Category Matches
Related Trade Leads
|
|
We offer to sell air dryers, refrigerated air dryers, compressed air
dryer, desiccant air dryers and desiccant dryers. Also supplying
heat exchange... (Sell) |
|
|
We are offering to sell an excellent range of Air Dryers :
-Refrigerated type of Air Dryer
-Heatless type of Air Dryer
-Industrial Air Dryers
... (Sell) |
|
|
We are offering chemical dryer, fluidized bed dryer, fluid bed dryers,
automatic fluidized bed dryer, industrial fluidized bed dryer,
pharmaceutica... (Sell) |
|
We are offering superior range of fluid bed driers with the
following features:
- High durability and reliability
- Available in varied specific... (Sell) |
|
We are offering superior range of fluid bed driers with the
following features:
- High durability and reliability
- Available in varied specific... (Sell) |
Tender Notifications
