Products Directory > Plant & Machinery > Material Handling Equipment >
Conveyor Pulleys
Products - 22
|
Conveyor Pulleys |
Displaying 1-22 of Total 22 Products Found |
-
Products
- Description
- Supplier Information
Magnetic pulleyes are used at the discharge point of the conveyor to separate tramp iron from the product moving on the conveyor belt. The pulley is particularly very useful in iron ore purification to ensure broader working field. Pulley is also used in conjunction with suspension magnet to efficiently control the tramp iron removal. Magnetic pulley can be manufactured using permanent magnets or electromagnetic pulley by using aluminum or copper coils. Electromagnetic coils of magnet are fully protected and sealed as these are normally used in open places and are subjected to varying atmospheric conditions. Magnetic pulleys are supplied complete with sealed bearing units on both sides and in diameter and length to suit individual requirements.
- Saideep, Mumbai
We offer a comprehensive range of standard conveyor accessories including side brackets, rod and railing clamps, idler rollers, pedestal base stands-tripod and bipod, adjustable leg pads, hinges and handles for enclosures etc.
- Ultraplast
Draton conveyor pulleys are manufactured out of heavy gauge steel tubing, best quality ERw/seamless steel tubes and rolled plates duly fitted with carbon steel single piece shafts suitable for torsional load covered with two side of welded plates and heavy hub to suit the shaft dia. The pulleys are rubber lagged with natural synthetic / neoprint material with and without herringbone groove.
- Ashton Green and Company
Erich permanent magnetic pulley is a dual purpose device. It functions as drive pulley for the belt conveyor and at the same time provide effective, automatic and continuous removal of tramp metal from a material flow.
The permanent magnetic pulley is basically composed by a set of rolled milled steel pole shoes of high permeability. Permanent magnets either strontium ferrite or high power rare-earth magnets are used. The magnet is of bi-polar nature with its field intensity uniformly distributed across the entire surface. Magnets are covered with aluminum or stainless steel shell and are bolted to heavy duty stainless steel end flanges and mounted to a sheet shaft. Available diameters from 250 to 1500mm and width up to 2000mm. more...- Erich Magnetic
Conveyor Pulleys ensure continuous operation, increase bearing life and reduce power consumption.
Its shell is made up of heavy tubes or fabricated from steel plates, pulley shafts of carbon steel machined with proper bore and keyway. Taper lock bushings are also offered which is optional. Its shafts are fitted with anti-friction self-aligning ball bearings; pulley drum furnished with high quality rubber lagging grooved properly to resist slippage.- Graveera Metal Industries
Our range of magnetic pulleys find their application as head pulleys in belt conveyor systems. These pulleys are used to enhance the purity of product and to help in the protection of the process equipment from tramp metal damage. Our products provide continuous, effective to removal of ferrous metal from the product flow.
Our products are installed at the discharge end of the conveyor and come in different sizes as per the clients specifications or the area of application. We offer our magnetic pulleys with flat or crowned pulley face, fixed shaft or no shaft, taper locks and set screws and are provided in rare earth neodymium or standard ceramic. Offered in smooth or lagged surface, our products have precision machined key ways and are available in four hub styles like
• Recessed Hubs
• Flush Hubs
• Extended Hubs
• No Hubs
Our products find their application in different industries like wood & plastic recycling, crushed or broken stone, more...- Electro Magnetic Flux Industries
We are reputed and trusted for manufacturing and supplying premium quality spares. We are engaged in designing and manufacturing of spares as per clients requirements.
- United Engineering Services, Indore
Conveyor Pulleys ensure continuous operation, increase bearing life and reduce power consumption.
Its shell is made up of heavy tubes or fabricated from steel plates, pulley shafts of carbon steel machined with proper bore and keyway. Taper lock bushings are also offered which is optional. Its shafts are fitted with anti-friction self-aligning ball bearings; pulley drum furnished with high quality rubber lagging grooved properly to resist slippage.- Dynatech Engineering Company
We offer impact resistance rubber lining for tanks and vessels for high impact materials. This kind of rubber linings is mainly used in stone grinding tumblers and ball mills.
- Eureka Conveyor Beltings Private Limited
We source robustly designed components and assemblies of conveyor pulleys manufactured under the strict guidance and supervision of quality control experts. We offer a range of conveyor spare parts for the convenience of our esteemed clients. The genuine product range aims to deliver 100% satisfaction with regard to their operation. These are made from quality alloys like, copper, brass etc.Our products are subjected to rigorous quality checks in order to manufacture zero defects, for hardness, run out and face out. The products are available at competitive price range which is another important feature exhibited by our products range. more...
- Arul Engineering
Our product offers a low cost approach to efficient tramp iron removals. These are high strength permanent magnet pulleys which are effective in every conceivable application where uninterrupted tramp iron protection as well as purification is required.
Our magnetic pulleys keep the conveyor line on-line, fast moving and efficient. This product features a continuous radial pole design for high performance.
Its applications are:
· Tramp iron removals from conveyor belts
· Filtration and concentration of ores, chemicals and granular products
Some of its features are:
· Efficient, cost-saving recovery of harmful tramp irons
· Super-tough, trouble free operation
· Maximum power and separation
· Develops powerful magnetic field at the center of the belt
· Standard sizes available in all diameters to match most conveyors.- ISC Machines
We offer Conveyor Pulleys, which are used as a component of belt conveyors. Available in various specifications, we also have facility to provide customization to our entire range of Conveyor Pulleys.
- Devcon Systems and Projects Private Limited
Various types of pulleys are engineered to the application and performance required, pulleys are fabricated to various sizes with either bare face, crown face & rubber lagged with herringbone grooves. Special vulcanizing process is used to ensure a smooth surface and full surface bond. The shell is made of IS: 2062 single rolled plate rim with welded end discs. The pulleys are statically balanced. Self cleaning type pulleys are supplied at Tail and snub on request. more...
- Reddy Engineering Company
Our conveyor pulley efficiently meets with the highest quality standards. The pulley is qualitative and yet cost effective at the same time. We manufacture the equipment as per the client's requirements and specifications. Following are some the feature of our product:
• Sturdy in design
• Simple in operation
• Defect free
• Long lasting service- General Elek Mek Systems
We are exporting all type of couplings and pulleys, which includes:
• C. I. V. pulleys a, b, c & d groove up to 6 groove pulleys.
• C. I. split v. pulley.
• Pin bush flexible couplings.
• Star couplings
• Nylon tooth couplings.
• Geared couplings.
• Tyre couplings.- Finebearing Co.
INGECO also manfuacturers conveyor rollers and idlers suitable for heavy applications in stone crushing and mining industry. We also supply idler drums and pulleys for this application. The rollers are designed and manufactured to ensure efficient material handling. The bearings used are of best quality and are made of either SKF/Nachi/ to ensure lng trouble free life of the roller. Any kind of quantity and design can be catered by us. Taper lock pulleys are also available in any section, diameter and number of grooves. The bushing is made up of SG iron and ground to close tolerances. more...
- Ingeco Gears (P) Ltd
Fabricated from steel plates, pulley shafts of carbon steel, we offer conveyor pulleys that are used as a component of belt conveyors. Available in various specifications, we also have facility to provide customization in our entire range of conveyor pulleys. Our pulleys ensure continuous operation, increase bearing life and reduce power consumption.
- Merger System
These pulleys are designed to withstand the most rugged applications and are known for low maintenance. We use qualitative raw material to manufacture thick walled conveyor pulleys that ensure continuous operation, increase bearing life and reduce power consumption. Each pulley is placed on a crowning lathe and machined to a concentric finish. These are available in various dimensions as specified by our clients.
- Thermo Engineering Co.
Drum Pulleys were originally designed for the rugged environment of underground coal mining. Their ultra heavy duty rigid construction has been proven in the toughest conveyor applications. The "good as the shaft" design of Precision Mine Duty Drum Pulleys make them particularly useful for spares or replacement pulleys in critical positions.
- Bajrang Conveyors
We present to our clients pully lagging sheet that is made from best quality is raw materials and is widely used across various industries. Available at competitive rates, these sheets can be custom manufactured as per the needs of the clients.
- Belting Enterprises, Indore
Our range of three roll idler set is fabricated by using different grades of N.B. ERW pipes such as 65, 80, 100 and 125. We also use 6203, 6204 and 6205 grades of ball bearings to make them highly functional. This is one of the most important accessory of the conveyor belt that helps in increasing the working life of the belt by 60% than before.
- R. H. Engineers
We offer acid proof rubber lining for tanks, vessels and pipelines for storing and conveying of acidic fluid. This type of Rubber Linings is commonly used in D.M.Plants for acid storage tanks.
- Eureka Conveyor Beltings Private Limited
