![]() |
|
||||||||||||
|
|
Products Directory > Scientific Instruments & Supplies > Testing Equipment & Machines >
Compression Testers
![]()
Products - 75
|
Compression Testers |
Displaying 1-50 of Total 75 Products Found |
Products

Box Compression (Motorised) for Duplex and corrugated cartons with Bright LED Digital Display. The unit comes complete with over travel protection; 'TARE' and 'P/H' (Peak Hold) facility. A low cost compact tester for the packaging industry.
The equipment is very rugged with heavy cast iron base for stable performance at load. The highly sensitive load sensor is strategically placed to enable perfect corner to corner load results. We also offer shrinkage scales and templates.
Platform Size : 18"x18" OR 24"x24" OR 1 x 1 Mtr.
Maximum Load : 500 kgf OR 1000 kgf
Type : Compression
Power consumption : 1 KW OR 2 .5 KW
Motor : 1/4 HP single phase 220V; AC Motor more...
|
Presto Stantest Pvt. Ltd. (Material Testing Instruments Division)
|
|
![]()

Compression Testing Machine more...
|
ETS Intarlaken Technologies
|
|
![]()

Compression Testing Machine Electrically-cum-hand operated. The machine embodies an Hydraulic system designed to meet the requirement of Indian Standards Specification 516-1959 for compression tests on concrete Cubes upto 5cm x 5cm x 5cm 7.06cm x 7.06cm x 7.06cm, 10cm x 10cm x 10cm and 15cm x 15cm and also concrete Cylinders upto 10 x 20cm, 15 x 30 cm height
Loading Unit :- The hydraulic jack of is fixed to the base. The upper platen has got a self-aligning action and is attached to a screw, which passes thru the cross-head plate, and can be raised or lowered for initial clearance adjustment. The lower platen rests on the jackram and is positioned with the help of a centering pin. Loading is accomplished by the upward movement of the lower platen.
A dust cover is provided on the jack to prevent any dust from going into the cylinder. A spacer with a centering locating pin is provided to test small specimens. The lower and more...
|
Rajco Scientific And Engineering Products
|
|
![]()

Computerized tensile tester used for rubber testing. Tensile testing machines tests tensile strength of rubber parts. In addition to tensile tester we offer many testing machines and scientific testing instruments like box compression tester, carbon black content apparatus, carbon black dispersion test apparatus and crush tester digital.
|
Presto Stantest Pvt. Ltd. (Material Testing Instruments Division)
|
|
![]()

Compression Testing Machine more...
|
ETS Intarlaken Technologies
|
|
![]()

For Compression test on Concrete or similar materials. Suitable for use on Concrete Cubes of any size upto 5cm x 5cm x 5cm, 7.06 x 7.06cm, 10cm x 10cm x 10cm, and 15cm x 15cm x 15cm also on 10 x 20cm and 15 x 30cm high Concrete Cylinders. The load is applied thru hydraulick assembly.
The lower platen is on the Hydraulic ram, and upper having a spherical seating is adjustable. The machine is provided with an air release valve and the load is automatically indicated on the 15 cms diam hydraulic pressure calibrated against an N.C.B.M. tested Proving Ring and fitted with a legless max pointer in addition to the live pointer.
RSEP-042 RAJCO Compression Testing Machine, Hand Operated, 25,000 kgf (250 KN, channel) Model : double plunger pump with hydraulic pressure gauge. Our own Calibration
RSEP-043 RAJCO Compression Testing Machine, Hand Operated, 50,000 kgf(500 KN, channel) Model : double plunger pump more...
|
Rajco Scientific And Engineering Products
|
|
![]()

We offer portable and easy to operate series of compression testing machines are suitable for mobile and field laboratories. These are used to test the physical and mechanical strength properties and performance of plastics, packaging, medical devices, electronic components, textiles, metals composites, paper and much more.
Designed for test materials under compression bending, transverse and shear loads
Hardness test on metals can also be conducted
Simple controls for easy of operation
Robust staining frame of an extremely rigid construction
Safe operation ensured be means of safety devices.
![]()

We are one of the leading manufacturers and suppliers of compressor testing machines that finds wide application in construction industry. These machines are used to test the particular compressive strength and specimen of concrete cubes or cylinders by applying load through this machine. We offer portable models that are highly useful and convenient for carrying specimens to the sites instead for testing in a standard laboratory. Provided with special attachments, the machines can also be safely used for bricks. The machine has a load frame with suitable platens and is provided with pumping unit with pressure gauge. The machine is either hand operated or electrically cum hand operated as per the client requirement.
Features: more...
![]()

Kalpak Computerized Universal testing Machines are ideal for quality control, R&D and Process troubleshooting. Wide range of tests can be conducted as per latest ASTM/BS/ISO/DIN standards making them essential for Material Test laboratories of ISO certified companies.
Features more...
![]()

Applications : more...
![]()

We offer highly efficient compression testing machines that are designed in confirmation with quality standards. Provided with digital load indicators with or without pressure gauge these machines are renowned for excellent operation. Our range of compression testing machines are calibrated by the NCCBM tested proving rings and the calibration certificate can also be provided for the pressure gauges. Some of the features are: more...
![]()

We manufacture electrical cum hand operated compression testing machine which is a hydraulic, electrically operated unit and is designed for compression tests on concrete specimens up to 20 cm. diameter (or width and depth) and 30 cm, in height and also for rocks and various other materials. It can also undertake cold crushing strength (CCS) test. Our equipment consists of a best grade steel cross head and cast iron base with two pillars connecting the base and cross head by means of nuts. It has a hydraulic jack which is fixed to the base. The upper platen has got a self aligning action and is attached to a screw which passes through the cross head and can be raised or lowered for initial clearance adjustment. The lower platen rests on the jack ram and is positioned with the help of a centering pin Loading is accomplished by the upward movement of the lower platen. The motorized pumping unit is of plunger type and is connected to the jack by means of a steel connecting tube. A maximum more...
![]()

Compression
Testing Machine 2000 KN having 200 tons capacity (Two Pillar Model)
electrically operated fitted with dual display that is:
more...
![]()

We are engaged in fabricating compressing testing machines which are known for its effective functioning among our valued clients. These machines are offered with digital load indicators with or without pressure gauge. Our machines are calibrated by the NCCBM tested proving rings and the calibration certificate can be offered for the pressure gauges of all the compression testing machines. These can be easily customized in accordance with client requirement and can be delivered on time.
![]()

We offer our clients with an exclusive range of compression testing machines (Model: FCT) that are ideal for testing a widespread variety of material. Available with options of standard and special (optional) accessories such as load-stabilizer and attachments for Brinell test, these are offered in different models with a maximum capacity ranging between 100 kN to 3000 kN. Mentioned below are some of the details of our compression testing machines: more...
![]()

Compression Testing Machine
more...
![]()

Our range of compression testing machines are durable, accurate and reliable. These are used in laboratory tests. Further, these are of competent price.
![]()

We offer precision-engineered compression testing machines in different capacities. Range of machine is ideally suited for conducting concrete compression test, where frame stiffness is critical. Some key features of our product range are:
Salient Features
* Frame design of these machines permits advanced testing of concretes
Material Used
* High grade steel complying to standards
Application
* Tensile test
* Compression test
* Shear test
* Flexure test
* Tear test
* Peel test
* Cyclic test
* Bend test
![]()

Asian Box Compression Tester measures the compression strength of the corrugated box. The system is made of a set of plates one is attached to the load measuring arrangement and the other is movable plate which is move with the help of motor, gearbox, and screw and nut arrangement, the movable plate have the facility of over travel and under travel. The load measuring arrangement is digital type. The box of which the compression strength is to be determined is placed on the lower plate, due to the motion of the movable plate the box is compressed and the compression load is directly read out on the digital indicator on the panel. The deflection of the box also measured with the help of the digital deflection indicator. The instrument is made in two parts, one is for main instrument and the other is the control panel. The ultimate test is to determining overall quality and performance of the container. The instrument is bright chrome plating, more...
![]()

We design and develop highly efficient and durable range of compression testing machines. These machines are used to measure the strength of cement and concrete samples. In manufacturing of masonry products, these machines are extensively used due to their flexural and compressive strength. They have static modulus of elasticity. Our wide assortment of compression testing machines include: more...
![]()

We manufacture and supply superior quality compression testing machine RCTM 40 that are based on latest technology. Our compression testing machines are widely used for the following applications:
To test metals and material such as refractory bricks, rock samples moving props, rubber parts etc.
Under compression, bending, transverse and shear loads
Hardness test on metals can also be conducted
Some of the salient features of our compression testing machines are as follows:
Loading accuracy as high as +-1%
Straining at variable speeds to suit a wide range of material
Continuous roll autographic recorder supplied as standard to enable study of the behavior of material.
Motor driven geared shaft for quick and effortless adjustment of cross-head-to facilitate rapid fixing of test specimen
High reading accuracy due to large size and design of dial
Wide range of standard and special accessories, more...
![]()

We understand the fact that the strength of concrete is a very important aspect during construction, so we are offering compression testing instruments. Strength of any concrete is attained by crushing the specimen through cubes or cylinders. Assisted by engineers, we design concrete for a particular compressive strength and the specimen is tested by applying load in a compression testing instrument. These are used for carrying frequently the specimens for testing in a standard laboratory where it is inconvenient and uneconomical.
Equipped with special attachments, our machines are also used for bricks. Our compression testing machine consists of Load Frame with suitable platens and a Pumping Unit with Pressure gauge, either had operated or electrically cum hand operated. Our machine's load frame and pumping unit are connected by pressure pipes.
Accessories: more...
![]()

We are engaged in fabricating Compression Testing Machines that are used in various laboratory tests. These machines are available in Hand Operated & Electric Operated versions, to match the specific needs of our clients. Designed for optimum performance, our machines are available in a capacity range of 100 KN to 2000 KN. Moreover, these are widely appreciated for durability, accuracy and reliability. more...
![]()

These equipment are in compliance with various industrial standards and are customized as per the specifications of our clients. Our range is fabricated using high grade raw material and is in wide demand across the globe owing to the features such as long serviceability, high functionality, precise performance and optimum quality.
Compression Testing Machine
Our range of compression testing machines is manufactured while fabricating a precision engineered range of compression testing machines. Conforming with the IS:516, BS & ASTM standards, these machines are offered at industry leading prices.
Some of the features for which our range is appreciated across the globe are as follows: more...
![]()

Compression Testing Machine 1000KN (100 Tons) Capacity (Four Pillar-Portable Model) Hand Operated fitted with 20cm dia load gauge. Designed for testing of Cement, Concrete and Mortar Cubes of various sizes by help of spacer block to cover the gap between platen and sample. The Concrete Cylindrical samples upto 15cm dia x 30cm ht can also be tested on the machine. The Machine is calibrated against NPL/NCCBM certified Proving Ring. more...
![]()

Our range of comparison tester has gained wide appreciation for its international quality standards. Manufactured using stainless steel 304, this quality tester is extensively used to compare the reading of master pressure gauge and tested pressure gauge by pressure balancing method. These are widely catered across various industries for preciseness and reliability in comparing the reading. more...
![]()

We manufacture and export a wide array of Compression Testers which have versatile application areas. Our firm adheres to all the recommended industrial standards which authenticate our range. These can also be customized according to the citations of our clients.
Cited below are the salient features of our Compression Testers:
Available with different capacities
Digital Indication of Load
Power Pack operated
![]()

Our digital compressor testing (CTM) machines the finest machines of their type. Their rugged construction and extreme simplicity make it possible to even non-technical personnel to easily operate them and without dependability. We manufacture these CTMs in compliance to varied international standards like BS, ASTM, and Indian Standard IS:516
![]()

Compression Testing Machine 1000KN (100 Tons) Capacity (Economy Channel Model) Hand Operated fitted with 15 cm dia load gauge. Designed for testing of Cement, Concrete Moulds of Various sizes 15cm x 15cm x cubes, 10cm x 10cm x cubes, 7.06 cm x 7.06 cm cubes, 15cm x 30cm cylindrical mould, bricks can also be tested by the help of adjustable hand wheel.
The Machine is calibrated against NPL/NCCBM certified Proving Ring. more...
![]()

Applications : Our high performance computerized compression testing machine is used for high resolution test for routine and complex tests and calculation with measurement of sample strain.
Main features: more...
![]()

2000KN
(200 Tons) Capacity (Fabricated Model) Electrically Operated fitted
with Digital Load Indicator with accuracy of 1KN. The digital load
indicator incorporates peak hold facility and relay contact to
protect the machine from overloading. The Machine is suitable for
operation on 440V, 3-phase, AC supply.
The machine is
calibrated against a NPL/NCCBM certified proving ring. more...
![]()

This is a hydraulic, electrically operated unit, designed for conducting compression tests on concrete specimens up to 20 cm. Diameter (or width and depth) and 30 cm, in height and also rocks and various other materials. Cold Crushing Strength (CCS) test is also possible. The machine consists of a steel cross head and cast iron base with two pillars connecting the base and cross head by means of nuts. The hydraulic jack is fixed to the base. The upper platen has got a self aligning action and is attached to a screw which passes through the cross head and can be raised or lowered for initial clearance adjustment. The lower platen rests on the jack ram and is positioned with the help of a centering pin. Loading is accomplished by the upward movement of the lower platen. The motorised pumping unit is of plunger type and is connected to the jack by means of a steel connecting tube.
Amaximum red pointer is provided to facilitate taking of the readings after failure of specimens. more...
![]()

The ARCHANA Digital Compression Testing Machine is very low cost affordable, low maintenance reliable easy to operate & wide range of applications including: Tensile Testing and Peeling, Flexural, Compression, Shear using appropriate test attachments.
Construction
The loading unit is of fully welded construction having a cross head, base and solid side plates. The hydraulic jack is fixed to the base. The platens of the machine are hardened, ground and polished. The upper platen is provided with self-aligning action. To facilitate testing of various size specimens, suitable size spacers are provided.
Electronic Pressure sensor used to indicate the load with peak hold facilities. Branded Hydraulic pump & fitting used for long lasting, provided with NPL Calibrated Certificate.
Specification:
more...
![]()

Our range of compression testing machine are useful construction and to test the strength of concrete. With special attachments, our range can also be used for bricks. In addition, our products are used to test the strength of hallow or solid concrete blocks. Moreover, our compression testing machines consists of load frame with suitable platens and a pumping unit with pressure gauge, which can be operate electrically or hand operated. In our machines, load frame and pumping unit are connected by pressure pipes.
![]()

We offer a superior range of box compression tester for the packaging industry. The testing equipment ranges from mechanical, electromechanical & hydro electro mechanical machines.
Characteristics
more...
![]()

The entire range of products offered by
us also include compression testing machines that are designed for
conducting compression tests on concrete specimens as per the
requirements of various Indian, British and American Standards. These
are hydraulic electrically cum hand operated compression testing machines, manufactured using
superior quality raw material. We offer these in different
configurations as per the client's demand.
Features :
more...
![]()

We manufacture and export a wide range of Compression Testers that find application in pharmaceutical and food industry. These testers are used for checking and validating the stacking capacity of corrugated box or container by applying force on them. Manufactured using quality raw material, these compression testers are available in various sizes, modals and capacities. Further, these testers are well known for high performance and high compression rate and can be customized as per the specifications of our clients. more...
![]()

Digital, motorized, strain control etc., complete with Pumping unit
Range : 200 ton, 400 ton, 500 ton more...
![]()

Our range of compression testing machine with three gauge are incorporated with load frame, pumping unit to provide efficient performance at clients end. These are available in the following specifications: more...
![]()

DIGITAL COMPRESSION TESTING MACHINE
The Digital Compression Testing Machine has been designed to meet the need for a simple, economic and reliable means to test concrete for its compressive strength. The design emphasizes simplicity, both of construction and operation, and makes the machine easy to use and maintain.
The unit is compact, making its useful for site applications. The digital machines are provided with a pace rate indicator to indicate pace rate on a Bar Graph. With a little experience, the pace rate can be manually adjusted while the test is in progress.
The Complete Unit comprises of:
LOADING UNIT:
The loading unit is of fully welded construction having a cross head, base and solid plates. The hydraulic jack is fixed to the base. The platens of the machine are hardened, ground and polished. The upper platen is provided with self-aligning action. To facilitate testing of various size specimens, suitable size spacers are more...
![]()

Our SD series of digital spring tester is specially R&D instruments. which is widely used in measuring load & distortion. It is adapted in lest tensile and compressive spring, stretch components and also can be applied in the test of plastic reed
Specifications:
Peak hold function
Catch and hoId the peak value in test:
Peak hold and auto-release function more...
![]()

This
is an equipment to test the Seal Integrity / Seal Strength of liquid
/ semi-solid filled pouches with or without gas / air, such as
shampoos / oil / tea leaves in pouches / wafers / chips packed on FFS
machines.
Significance:
When
a master carton fails due to compressive load in stacking /
warehousing, the palletized load gets transmitted to the individual
pouches. This load generates extra pressure inside the filled pouches
and can cause seal failure resulting in leakage of liquid / solid /
gas from failed seal joint.
It
is desirable to know the maximum load causing seal / seam failure in
pouch.
This maximum load resulting into failure of weak seal is
called Pouch Burst Strength or Pouch Compression Strength.
Principle
of operation:
more...
![]()

Designed to meet the need for simple, economic & reliable means to test concrete cube and concrete Cylinders for its compressive strength, we have for our clients our compression testing machines. Emphasizing on the simplicity of design as well as construction, these machines are largely demanded in the global arena. Easy to use and operation, these compression testing machines can be availed in different capacities and are ideally suited. The superior design of our Compression Testing Machines helps in permitting testing of concrete cubes & concrete cylindrical samples.
![]()

Our compression Testing Machine provides simple economic & reliable means to test concrete cube for its compressive strength. Its simple design makes it user friendly for construction and operation. These machines are suitable for operation on 440V, 3-phase, AC supply
The salient features are as follow:
more...
![]()

Compression Testing Machine 2000 KN (200 Tons)
Compression Testing Machine 2000 KN (200 Tons) Capacity (Four Pillar Model) Electrically Operated fitted with dual display i.e load gauge 0-2000 KN x 10 KN/ Division and Digital Load Indicator 2000 KN x 1 KN/ Division. The micro switch fitted in load gauge and relay contact in digital load indicator to protect the machine from overloading. The machine is suitable for operation on 440V, 3-phase, Ac supply more...
![]()

We present analog control model with analog controller in base. 1500g capacity, 220V, 50Hz. These are manufactured out of superior quality raw material and this is why it has high resistance in the extreme conditions. These are qualitative and cost effective at the same time.
![]()

Our compression testing equipment have designed so that it efficiently meets the need to test concrete cube for its compressive strength. This equipment is the most simple, economical and reliable means of testing. Following are some features which has made it a demanding product in the market:
more...
![]()

The box compression tester is designed and manufactured as per the requirements of transport packaging case pressure test; it confirms ISO2872 and ASTMD642 pressure tests. It is applicable to carry out proof pressure, deformation and stowage tests for flexible packaging cases with corrugated cases, honeycomb crates, and other packaging cases.
Maximum load: 2000.0 KGF more...
![]()

We offer compression testing machine with digital readout unit, which are incorporated with load frames and designed to withstand a few million times of full cycles of loading without any sign of distortion or fatigue. These frames are light in weight and the base carries a fine finished hydraulic ram and the lower platen. In addition to this, the top plate has the spherical seating to take care of any irregularity of the specimen surface or slight misplacement of the specimen from the central position.
Moreover, our range also consist of pumping unit, which is attached on the right hand side of the loading unit. It is a multi plunger pump submersed in the tank and is powered by 1.5 kW electric motor.
We also add power pack, which gives non-pulsating flow to the hydraulic ram to ensure smooth loading of the specimen which can be seen by the movement of the load gauge/digital display. Further, the flow of the oil can be precisely controlled by the strain control knob located at a more...
![]()

Normally
the stiffness value (Taber) of Duplex Board is taken as an indicator
of the rigidity of Printed Duplex Board Cartons. However the results
shown on a stiffness tester cannot be properly understood or
co-related with the performance of the mini carton.
This
is an equipment to evaluate maximum compressive force a carton can
withstand before failing. This reading can be easily co-related with
the stackability of individual printed cartons or of the larger
shipper cartons.
Principle
of loading:
more...
![]()
Category Matches
Related Trade Leads
|
We Have the Requirement of compression tester with a range in btwn
-2000mmwc to 150 kg & also if anyone have any other range offers please
send us ... (Buy) |
|
Offering diverse range of environmental control and product testing
systems of highest quality like:
- Environmental Test Chambers
- Dust Test C... (Sell) |
|
Point Load Index Tester 2500Kg capacity for spherical refractory balls
of dia. ranging from 3-50mm with tolerance of +/-2mm. (Buy) |
Tender Notifications
B2B Newsletter Subscription