Products Directory > Industrial Supplies > Cooling Towers >
Compressed Air Dryer
Products - 36
|
Compressed Air Dryer |
Displaying 1-36 of Total 36 Products Found |
-
Products
- Description
- Supplier Information
We offer a wide range of air drier for various industrial and commercial applications. Our range of air drier includes following features:
• Contain two separate and identical pressure vessels
• Provide low dew points
• Manufactured from physically tough and chemically inert material
• Low initial cost for regeneration
• No cooling water supply required
• Fully automatic operations
• Reliable and least expensive
• Pre filter to remove dust, dirt & other particles
• Only single phase power is required- Weltech Refrigeration Co, Mumbai
In our heat of compression type dryers, hot air at 120 degree Celsius to 140 degree Celsius from compressor discharge is directly used for the desiccant regeneration. Running cost of this dryer is virtually NIL. This model has two drying towers filled with the activated alumina or molecular sieve desiccant and alternate in process every 4-hour automatically. Some of the important features are defined as follows: more...
- Airro Engineering Company
Excessive leakages in compressed air piping ! Sluggish pneumatic tools/machines operation !! Malfunctioning of precious pneumatic instruments !!! Etc. are unlimited problems faced by compressed air users in industries. The root cause of these problems is moisture, oil and dust particles in compressed air. We the team of 'Pneumatic engineers, from "Drytech" offer RD Series refrigerated drying unit ( RDU ). the RDU can deliver the compressed air with quality of air as per ISO specification recommended to various applications. more...
- Dry Tech Engineers
We have successfully packed 70P Elliott Blower, Gearbox, 1000 KW motor (2-pole) with double extended shaft with 500 KW startup steam turbine for starting the string.
This includes the following activities: more...- CICB - Chemicon Pvt.Ltd.
Heatless Air Dryer works on the principle of adsorption. The dryness of compressed air / gas can be achieved up to (-) 70 °C ADP : It is most simple, stationary and fully automatic system operates with almost negligible maintenance.
The rightly selected Drytech pre fine filter combination results in enhanced / consistent dew point over long period. The dryness of air achieved by this type of desiccant dryer is better than refrigerated dryer.
Applications: To various engineering applications where atmospheric dew point is preferred (-) 40 °C and above.
Location: After Air Receiver in comp. air system.- Dry Tech Engineers
Type: Package consisting of common skid with provision for bare compressors mounting, Inlet/Outlet Air receiver with Dryer having fine filter combination & by-pass arrangement to deliver consistent quality air & pressure at outlet.
Range: Up to 60 SCFM flow
Pressure: 10 kg/cm3 more...- Dry Tech Engineers
We manufacture Heat Less Air Dryer that is tested to provide dry, clean and oil free compressed air at high as well as low pressures. Thy work at any pressure and can be availed from us as per the desired specifications and requirements.
Features: more...- Super Fab India Gurgaon
We bring you an unparalleled compressed air dryer, the Beko Drypoint® M. If you use point-of-use dryers that take up lots of factory space and valuable kilowatts, you need to switch to Drypoint® M. Beko Drypoint® M dryer uses the air passing through it as its power source and it is, by modern standards, simple technology and relatively maintenance free.
The Drypoint® M range goes down to a pressure dew point of -20C, giving you the ultimate dry air to protect your vital production. more...- Saturn Engineering Services
We are also engaged in manufacturing air drying plants, for varied industries. It is designed for purification and filtration of air. They are efficient in drying compressed air. They are available with different configurations as per the requirements of the customers. It is available with the following specifications.
Salient features
more...- Air Care Equipments
The Drying unit has 2-vessels filled with Activated Alumina or Molecular sieves desiccant. One vessel remains in drying cycle for 4 hours, while other vessel simultaneously regenerates at atmospheric pressure. Around 3% flow of dryer capacity is used as purge for regeneration. Electrical heaters are provided in a central finned Stainless steel pipe in both drying vessels. Heating cycle is for 2 hours and in this time hot purge air increases desiccant temperature to around 100 degree C. At this temperature regeneration is complete (due to dry air purge). Dew point achieved is around (-) 40 degree C. If still lower Dew point is required, air purging rate is slightly increased to 5% for (-) 60 degree C and to 7.5% for (-) 80 degree C Dew point.
- Prithvi Engineering Enterprises
By incorporating an Air Dryer in the compressed air system, the moisture count can be brought down to less than 80ppm which means very dry air. Dry air is an essential element of any pneumatic system, hence whenever compressed air systems are to be installed. An Air Dryer should be an integral part of that installation. Heatless or Refrigerated Type Dryer of 10cfm. to 2000cfm. are available with us.
- Deep Pneumatics
(Trident Pneumatics Pvt Ltd)
Designed and tested to provide 100% clean, dry, oil free compressed air at -40°C atmospheric dew point, to safeguard your valuable pneumatic equipment. Available in 19 models to suit specific requirements. For pressures upto 70 bar and flow upto 5000 cfm.
Salient features:
• Extensive Mimic display with Electronic Controller
• Energy saving purge economiser
• Stainless Steel Filters Cartridges
• Fabrication Code : IS 2825 ,
• Dewpoint better than -40° C
Optional :
• Fabrication Code : ASME SEC VIII DIVI
• Dewpoint based changeover- Hydro Pneumatics & Spares
Our refrigerator type air dryer is highly used in applications such as drying of plant air and other utility gases like hydrogen gas, nitrogen gas drying etc. These are available under brand name "Gem". They are most commonly used for moisture removal and to provide dry clean air for compressed air & pneumatic systems.Some of the features of our products are: more...
- Atharva Enterprises, Nasik
We are one of the most recognized manufacturers of air dryers. These air dryers are of two types:• Refrigerated Air DryersOur refrigerated air dryer has lowest running cost because there is no purge losses. This system is most efficient and economical to use for most of the applications and is widely accepted in all manufacturing industries.• Heatless type Compressed Air Dryers:Our dryers are required in pharmaceutical, powder conveying systems, Pneumatic conveying of hygroscopic materials e.g Plastic raw materials, cement conveying, high quality painting jobs in auto industry and CNC machines etc. Our system is the most simple, reliable and economic system amongst all other type of dryers where very low dew point upto -80°C is required. From our end special dryers for gases like oxygen, nitrogen and hydrogen etc are also available. more...
- Advance International
We manufacture good-quality refrigeration dryers which perform effectively. Thet are reliable in separating condensate at high temperatures. We emphasize on highly useful refrigeration circuits and hot gas bypass regulators. We design our tools for advantageous use.
Since the refrigeration dryer is used for reliable condensate separation, therefore we use different stainless steel condensate-separator. This configuration bring superiority to the systems as this provide better condensate separation.
Features
• Helium leak tested stainless steel plate heat exchanger
• Stainless Steel Demister Cartridge
• Large condenser for high ambient temperatures
• Anti-freezer
• Anti recycle controller
• Microprocessor controller- Trident Pneumatics Private Limited
Manufacturer of Heat less Compressed Air Drying plant of various flow capacities and working pressure range to suit customers requirement for removing moisture from the compressed air. It works on absorption principle using activated alumina as desiccant (Drying Agent). The Regeneration of the activated alumina is done by purging a small quantity of dry air, fed back from outlet of the drier during fully automatic regeneration cycle. It consists of two nos. drying chambers, each works alternatively in absorption (drying) and regeneration cycle. The plant is also equipped with prefilters and after filters to remove solid particles ,oil vapours, liquid impurites, etc.
- Sujata Metal Engineering Works Private Limited
Compressed air is used in industry for instrument operation. Compressed air is also used for process purposes like intermingling with products, sulphonation, drying of polyester chips and other products. Air has moisture at all stages. Air also has dust, oil, grease etc. These vary from country to country. However in India following limits are generally specified. Moisture : Dew point required: -40 Deg. C to -80 Deg. C at atmospheric pressure . Dust : Between 1 microns to 5 microns Oil, grease : Less than 1 ppm. Filtering or coalescing does removal of dust. For removal of oil/grease activated carbon filter is used. Moisture removal is done by knocking down the moisture in separator (Knock out drum) and then passing the air through a chiller for smaller dew point. However, desiccants are used for dew point of below – 40 Deg. Most common desiccants are as follows: more...
- Elgin Process Equipment Private Limited
We provide complete range of refrigerated air dryers. Non-cyclic refrigerated air dryers from 10 cm to 10000 CFM down to constant dew point of +2°PDP. The refrigerant air dryers are equipped with an hermetically sealed compressor and depending on size, an air or water cooled condenser. The expansion valve automatically matches the flow of refrigerant to the prevailing compressed air cooling load. Following are some features for KIEC refrigerant dryers: more...
- K. I. Engineers & Consultants
We supply the best chamber type forced circulation hot air dryer that are used for quick and efficient dying.
- Tex-Fab Engineers India Private Limited
Refrigerated Compressed Air Dryers - Cold Bank These air dryers are ideal solutions for clean and dry compressed air that provides consistent dew point of 3°C. Their running cost is very low and they maintain constant pressure dew point. Provided with alarm and extensive LCD display they also offer compressor safety through HP / LP cut switches. Compressed Air Dryers (Heatless) - DP Series Designed and tested to provide 100% clean, dry, oil free compressed air at -40°C atmospheric dew point, to safeguard your valuable pneumatic equipment. Available in 19 models to suit specific requirements. They work with pressures upto 70 bar and flow upto 1920 m3 / hr. Salient Features: more...
- Emerald Technocrafts
We manufacture air dryers to deliver a complete range of compressed air purification solutions so that to improve air quality throughout the space from compressor room to all points of use. Our range of air dryers are heat less and can work at low pressure as well as high pressure. These can be customized in the capacity ranging as per the desired requirements.
- Sheel Enterprises
Auto Scrubber Dryer (HT 43 & HT 50)
• Two models to choose from
• Scrubs and dries floor in one pass increases cleaning efficiency by 3 to 5 times
• Ideal for large open floor areas like shopping malls, factories, hospitals airports, railways stations etc.
• Solution Recovery tanks made of S.S
• Can be used with pads also
• Designed for Indian Conditions
• Rugged performance & Low maintenance
more...- HP Industrial Marketing & Consulting
For the treatment of compressed air and making it completely moisture free, we present a range of refrigerated air dryers to our respectable clientele all over the world. This moisture-free compressed air is utilized in many industries and their different processes. These dryers are manufactured and designed by our team in order to make them impart high performance and customer satisfaction. These refrigerated dryers are a blend of superior quality raw materials and advanced manufacturing technologies. We use only eco-friendly refrigerants in them. We test each component of these dryers on strict quality parameters to make sure they deliver the best possible performance. We make these dryers available in various specifications and variants in the market.
- Global Refregeration And Equipments
We have for our clients our heatless
compressed air dryers that are the simplest form of dessicant type
gas or air dryer (drier) for achieving a dew point of -40°C for
compressed air systems and other gas and air dryer (drier)
applications. Process- Wet incoming Compressed air after passing
through prefilter passes through the slide piston valve assembly and
is directed towards chamber I where the compressed air passes upward
through the desiccant. Compressed Air drying takes place by
adsorption. Dry Compressed air from chamber I then passes through the
Check valve assembly and then through the after-filter to the
application or work area.- Western Conveyor Projects
Compressed Air Dryer is a component of Compressed air systems used for generating compressed air for various industrial applications. Our Compressed Air Dryers effectively remove all the moisture and lubricants from the air coming over from other compression processes.
Salient features:
•Compact and easy to install.
•Economical and consumes less power.
•Has in-built safety equipment.- Precision Cooling System
DESIGN PARAMETER:
100% RH, Inlet Temp. 40 deg. C Operating Pr. 16 bar Max. However units for higher-pressure up to 150 bar can also be supplied.
WORKING PRINCIPLE:
Regenerative Desiccant Compressed Air Dryers are an economical process to reduce the moisture content of the compressed air to achieve the dew point as low as minus 80 deg C. The dry Compressed Air ( at consistent ) dew point is continuously achieved by using Twin Towers packed with desiccant. While one tower is on-stream- drying the compressed air, passing small percentage of dry air is regenerating the other. The cycle is repeated at pre- set interval. DEW POINT: up to minus 80 deg. C
While one tower is on-stream- drying the compressed air, passing small percentage of dry air is regenerating the other. The cycle is repeated at pre-set interval.
DEW POINT: - upto minus 80°C
FEATURES: more...- Multitech Sales And Services
Our array of dryers is extensively used in chemical and pharmaceutical industries and is made from materials like stainless steel, mild steel and other suitable material. We can customize as per the specification of the customers. The range of industrial dryers that we manufacture is: more...
- Subhash Engineering Works, Pune
We provide GEM make Compact Air Dryer, wall mounting type with twin non corrosive aluminium towers filled with desiccant Activated Alumina. Models available for capacities 10,15, 20 & 25 cfm and pressure 7bar to 12.5 barg.Salient Features:- more...
- Atharva Enterprises, Nasik
We manufacture and customize air dryers to deliver a complete range of compressed air purification solutions so that to improve air quality throughout the space – from compressor room to all points of use. Our range of air dryers are heat-less and can work at low pressure as we ll as high pressure. These can be customized in the capacity ranging as per the desired requirements.
- Super Fab India Gurgaon
Compressed Air Dryers - DP Series(Trident Pneumatics Pvt Ltd)
Designed and tested to provide 100% clean, dry, oil free compressed air at -40°C atmospheric dew point, to safeguard your valuable pneumatic equipment. Available in 19 models to suit specific requirements. For pressures upto 70 bar and flow upto 5000 cfm.
Salient features:
• Extensive Mimic display with Electronic Controller
• Energy saving purge economise
• Stainless Steel Filters Cartridges
• Fabrication Code : IS 2825
• Dewpoint better than -40° C
Optional :
• Fabrication Code : ASME SEC VIII DIVI
• Dewpoint based changeover- Hydro Pneumatics & Spares
Our Heatless air dryer consisting of two towers filled with Activated Alumina and at a time one tower is under process and another tower is under regeneration simultaneously. We can achieve dew point of (-) 40 degree C (at atmospheric pressure) we can also get a dew point up to (-) 80 degree C but quantity of purging air will increase up to 25%. The capacities that we offer in this category are 10 NM3 / hr to 1000 NM3 / hr. Some of the features that need to be highlighted are:
Low initial investment and operating cost.
No maintenance.
High performance.
Single Phase Power Supply.
No extra energy required for regeneration
Ambient Working temperature.
Desiccant life 3-5 year.
Dew point (-) 40 degree C.- Prithvi Engineering Enterprises
We manufacture heated adsorption air dryer which offer dewpoint of -40°c depending upon the requirements. Heated part of the air is utilized in these dryers and no air-loss takes place in this type of dryer.
Our dryers are used for any capacity which is higher than 500 scfm. Our internal heating dryer provides optimum dewpoint resulting into high effectiveness.
The heaters are placed inside the insulated tower. This tower is heated as per the temperature requirement and pumped afterwards.- Trident Pneumatics Private Limited
Principle of Operation - Coldspell(Trident Pneumatics Pvt Ltd)
Warm compressed air enters the Air / Air Heat Exchanger where it is precooled by outgoing cold dry air. Pre-cooling makes it possible to use a smaller (More Economical) refrigeration Unit, The pre-cooled air enters the Air to Freon Heat Exchanger where it is cooled down to +3°C. At this temperature, water condenses into liquid droplets, which are removed from the air stream by a very efficient Demister and automatically discharged by a Trident Automatic Drain Valve. The Cold dry compressed air passes back through the secondary side of the Air to Air Heat Exchanger where it is reheated by the incoming warm, air. Reheating the outgoing compressed air increases the volume of the air enabling it to do more work and it also prevents downstream pipe sweating. Trident Heat Exchanger has no extended surfaces or sharp corners that collect dust, dirt or oil residue. Any dust, dirt and oil will be washed from the more...- Hydro Pneumatics & Spares
The Dryer is fully automatic with pneumatically actuated Ball / Plug valves. A sequence timer controls operation of these valves. Desiccant used is Activated Alumina and it dries the air up to (-) 400 C Dew point.
ADVANTAGE OF HOC DRYER :-
Maintenance cost is very-very low because there is no moving part, no blower and no continuous requirement of Electrical heater.
Life of activated alumina around 5 year.
No loss of compressed Air.
Pressure drop across dryer is max. 0.2 kg/cm2.
Skid mounted and ready to install
Dew point is (-) 400 C.- Prithvi Engineering Enterprises
We design and manufacture dryers for locomotive usage. We ensure that our locomotive dryers which meets all the prescribed environmental and functional specifications set up as per the railroad industry.
We manufacture compatible and competent dryer that withstand the vibrations, temperature etc. in the locomotive platform.
We produce locomotive dryers which are designed exclusively for the railroad industry. These dryers could be used in following applications:
• Electric Locomotives
• Diesel Locomotives
• Mining Applications
• Shunting Locomotives
• Commuter Locomotives- Trident Pneumatics Private Limited
We manufacture heat less absorption air dryer designed to perform heavy duties. Our dryers come with oil removing filter, prefilter, after filter, fittings timer etc. Our excellence in engineering let us allow to create products which are capable to provide one-stop-solution. These air dryers grant moisture free air.
Features
• Optimum size of towers is used ensuring optimum purge air pressure drop use.
• Extensive mimic display with electronic controllers.
• Energy saving purge economizer.
• Stainless steel filter cartridges.
• Dewpoint more than -400C.
• No Pressure Spike: Ensures long desiccant life during changeovers.
Highlights
• Purge Economizer- Helpful in setting switch in the controller for maximum flow percentage, the controller automatically close the purge valve as soon as sufficient purge air has used. This reduces the purge loss according to the air usage. The purge loss reduces to 5.6% whereas the normal- Trident Pneumatics Private Limited
