 |
 |
 |
 |
|
|
 |
|
|
||||||||||||
|
Products Directory > Medical Products > Cleanroom Equipment & Supplies >
Clean Room Equipment
Products - 51
|
Clean Room Equipment |
Displaying 1-45 of Total 45 Products Found |
Products
We use water proof commercial ply made of teak wood to fabricate sturdy air shower. The external surface is made of laminated sheets and the surface of air plenum is coated with synthetic rubber paint over suitable primer base.
Aluminium or PVC mat flooring is used for plat form. Its sturdy doors are made of 6 mm clear glass and aluminium pipe and are provided with automatic door closures & manual locks. It can retain particles up to 10 to 15 micron and has efficiency of 90% with a pressure drop 6 MM WG.
Specifications : more...
Our horizontal Laminar Air flows are perfect for operation in particle free & sterile conditions. This is possible due to continuous flushing done by ultra filtered airflow & unidirectional airflow in the working area. This continuous flushing also assures full protection of the products.
We design our laminar air flow benches as per class 100 cleanliness for flushing very minute particles. The size specifications of the particles, which can be flushed both in their rest & dynamic conditions by our benches are as follows:
0.5 µm < 3530 particles / M³ to 5.0 µm < 0 particles / M³ .
Special features
In our Laminar Air flow horizontal benches, the following features are present:
• International standard Mini pleat HEPA filters for high efficiency particle retention.
• For reducing the noise & vibration level, there is spring suspended DIDW blower assembly.
• Low pressure gouge is also present inside the benches, which are more...
Our range of pass box is manufactured with mechanically interlocked glass doors and UV light. These pass boxes are enhanced in compliance with the latest up gradations in R&D model and specifications.
The application of these PHEROH make pressure module is used in a small cleanrooms to keep the posititive pressure inside. Its take place place in the industrial manufacturing for the protection of the product from the dust in the following areas. more...
We offer a range of clean room equipment, which are known for their efficient performance and low power consumption. Available in tailored options, our range of clean room equipment are in line with the international standards. These equipment are manufactured using standard quality raw material and can also be customized as per the specific requirements of our esteemed clients. more...
Bio-cleanair"™ Pressure Modules is designed to provide clean air in a small enclosure. These modules feeds two stage filtration primary 5 micron and final 0.3 micron HEPA filtered dust-free air to built-up and maintain positive pressure in the sterile area. The positive pressure effect caused by the module ensures that the air movement is always outside and prevents entry of contaminated air inside the sterile area.
Available in 500 CFM & 1000 CFM airflow capacities based on the room volume in self mounting type, wall mounted, ceiling & window mounted models.
MOC :
more...
The clean air tents are actually Clean Air Work Station. These are suitable for a relatively smaller clean room are we offer these in a ready to assemble configurations. These systems are used in various applications and can be moved from one place to another place.
The two most important areas, where these systems can be used are Packing Sections of a Pharmaceutical Industry & Automatic Filling Stations. In other industries, where these can be used are Machinery Production Industry, Filling Line, Sealing in Pharmaceutical Industry, Packing, Micro-electronics, Space Applications and Food Processing.
Product Characteristics
• To bring versatility in their applications, these are manufactured in various sizes.
• Are availed in Ceiling Suspended types and Self Standing types.
• Can be availed in SS or MS with PU painted constructions
"Bio-cleanair"™ modular type Clean Rooms / Air Tents will be of vertical airflow with air re-circulation and fresh air taken from the local room area through10-15 micron pre filters and the return air is re-circulated to the HEPA/ULPA pressure plenum through the return-air-raisers located on the sidewalls of the cleanroom. In-order to adjust the fresh air intake a minimum of 10% air exhausted out. The return air collected at below the average working height from floor level.
MOC :
more...
Equipment is used for dispensing of powder & chemicals to minimize the risk of contaminating of the work area & ensures the health for working person under the laminar air flow. The equipment is based on 3 level of filtrations of air circulation. This ensures that the cloud or particles formed by the material dispensed is sucked form the pre filter, intermediate filter & supply with mini pleat HEPA filter. Magnehelic gauge will indicate the pressure difference between the filters. During the initial cycle we achieve class 100 air with velocity 0.45m/s +/- 20% below working area.
FEATURES: • Class 100 air • Air curtain PVC curtains is provided • Internal coving is provided • DOP port up stream is provided • PHEROH make HEPA filter eff. 99.997% down to 0.3 micron as a supply filter • Pre filter eff. 95% • Intermediate filter efficiency 90% • Motor blower assly : High capacity, FRP blower with aluminum impeller dia 7” * 4 more...
Our range of dispensing and sampling
booths is widely used in area where harmful and toxic powder dust is
emitted such as during dispensing and sampling processes of powders.
This system regulates the powder contaminants, thereby providing safe
and risk-free environment for the operator and others. It is provided
with a HEPA filter, which prevents the airborne dusts by down draught
technique.
Technical Specifications:
more...
Prior to the entry of a controlled environment, Our manufactured air showers systems are installed and this assists in avoiding contamination through personnel entry. To lift off various types of contaminations including dirt, lint, dust etc, our manufactured air showers employ concentrated airflows. The individual air flow is conducted through a specially manufactured chambers inside these air shower entry system.
Effective scrubbing action is ensured by the high velocity air from jet nozzles, which is essential for removing the particulate matters. Polluted air then flows through the shower's side walls and finally, it passes through pre-filters and HEPA filters for letting off all impurities. more...
We offer positive pressure modules that are used in small cells and enclosures to get clean area. It is fitted with prefilters and the blower assembly sucks the air and transports it into the heap filter chamber. Here the air is filtered in an efficient manner.
Dimensional Details
more...
"Bio-cleanair"™ pass through boxes are installed in a manufacturing area to pass through the materials from a un-controlled environment to a controlled environment.
It is cubicle box with doors on both side and they are interlocked. It protects the controlled environment from possible pollution while transferring a material inside. These pass boxes works in similar process of AIR SHOWER and removes such loose particles / dirt from the packed materials transferred the manufacturing area to other places & vice versa in pharmaceutical / electronic / food industries. These are available in Static & Dynamic type.
MOC :
more...
We designed these Positive Pressure Modules in such a manner so that these can be capable in providing a clean area within a small enclosure or cell. The working principle of these pressure modules is almost same to the Laminar Airflow.
At the rear end of the unit, the pre-filter is fixed. For sucking the air, a bowler assembly is used. After sucking our the air, the air is passed through the HEPA filter chamber. The highest level of air filtrations is taken place inside the HEPA filter. more...
The Pass through box offered by us is specifically designed to curtail traffic and contamination entrance into the clean room. But is allows the passage of parts, tools and other work items in the room. It operates as an air lock device regulates the air pollution.
It is available in different sizes and designs and is painted with PU. It’s MS and SS construction makes them durable and long-lasting.
Features:
more...
FUNCTION
These vacuum dryers are mainly used for drying of high grade, oxygen & temperature sensitive materials. hygroscopic substances are very suitable for drying in these tray dryers because these materials require very low residual moisture and very low content level after drying.
CAPACITY
We offer these vacuum tray dryers within the range of 4 trays to 48 trays.
SALIENT FEATURES
• For both dia-thermic fluids & pressurized hot water, these tray dryers are suitable.
• Sleeve filters & Cyclones for powder recovery.
FEATURES
• All the parts are made up of quality materials prescribed in GMP models including SS304 / SS316 /
SS316L
• The heating shelves are of hollow pad and these are easily removable for maintenance.
• Available in steam sterilize models.
• In the large models, double door loading is available.
• For restraining corrosion, the internal surface is lined with haler.
Our world class range of Pass Boxes are designed in conformation to the international standards and are used for transferring the material from and into the cleanroom, without contaminating the air of clean room. In the process, room door is not required to open. These can be easily be installed on the wall between the clean room and other room.
For Clean Room applications, Electrostatic Filter modules are available with air flow capacities of 500 CMH, 2000 CMH, 3000CMH and 4000 CMH per module. These can be stacked together for catering to large air flow requirements and at the same time retain the efficiency of electrostatic filtration. The high voltage power pack can be mounted at a remote location. These modules can be retro-fitted to existing mechanical filter units to improve the filtration efficiency without change in suction fan power requirements.
We can provide upto class 100000 dust controlled rooms witout the use of airconditioning or HEPA filters.
These filter modules are ideal for use as prefilters for higher than class 1,00,000 clean rooms, saving electricity and extending the life of the terminal HEPA filters by over 3 times. more...
We export qualitative gamut of Horizontal Laminar Air Flow that are precision engineered and are designed to perfection. They are manufactured conforming to the international standards and are high in performance and low in maintenance. Further, they can also be customized as per the specifications and requirements of our valued customers. We have a team of efficient personnel along with the in house design unit that facilitates us in the fabrication of our range as per the demands of our customers.
Our exclusive equipment works in the following manner: more...
Our clients can avail from us, a high performing range of pollution control systems that is designed for upgrading various classes of clean room to assure non contaminated indoor air quality. These systems are widely used in clean room areas, hospitals, pharmaceutical industry, electronics & semiconductor industry, laboratories and radio-active labs. Designed for achieving cleanliness level of up to 700 class, these systems operate through the following: more...
We offer superior quality Powder Dispensing / sampling booth which has open-fronted design. This kind of system offers ease of access for both operator and material. It is ideal where a high degree of flexibility is desired. Down flow booths and workstation offers safe, controlled working environment and can carry out a wide range of operation. The product can be customized and it is available in4’X 4’X 6’, 6’X 4’X 6’ & 3’X 2’X 6’. more...
We offer a wide range of air shower, which are self contained chambers installed at entrances to clean rooms and other controlled environments. These minimize particulate matter entering or exiting the clean space. Further, our range are highly in demanding applications in the micro-electronics, semiconductors, pharmaceutical, spray painting, lab animal research and food markets.
Application areas :
more...
With the proper usage of our modern resources, we produce a wide range of pass boxes. Our range is made with supreme quality raw material such as mild steel, stainless sheets and galvanized sheets. We offer our range in dynamic and static type. As per the demands of our customers, we offer custom made products. more...
We are engaged in manufacturing qualitative roll o matic filter. These are primary stage filters, which gives an economic solution to pre-filtration. These filters can be easily installed and requires les maintenance. After installation, the roll o matic unit only needs replacement of filter media and this is easily available. Our roll o matic filter has compact design, which is used as pre filters in fertilizer, manmade fibers, Steel, automotive industries, nuclear applications and in general ventilation more...
We are available with Clean Rooms & Clean Room Panels that are widely used in different industries and are stringently checked by our team of quality controllers before delivering to the market. This intricately designed range includes the following: more...
We specialize in manufacturing best quality sampling dispensing booths,
which find application in filling, refilling, weighing, sampling &
dispensing of raw material, basic compounds, active compounds etc.
Working on the principal of laminar air flow, these dispensing booths
are mounted with stainless steel frame on the ground. They are
furnished with casters so the clean enclosure can be moved over
equipment.
Features:
more...
Our range of fan filter units (FFU) is a type of terminal module. These are specially designed to deliver superior- quality clean air into the work area. This module is very convenient for the user and is integrated with a blower and filtration system with a single low profile casing. This is a perfect and most cost-effective solution for constructing the clean room.
We offer fan coil unit, which are used for floor standing or ceiling suspended. These are made of copper tubing and aluminum fins with vent valve for air removing. Some of the features of our products are: more...
We are engaged in the designing and development of pass box which is one of our most popular contamination control products. Offered in the type of dynamic/manual, its materials of construction are CRCA Powder coated / SS304 / SS316. Based on customers’ requirements the pass box can be developed in different sizes. more...
A well established firm, we are engaged in offering, fan filters to our clients. In our fan filter, the vertical ceiling laminar flow airflow is suspended from the ceiling at a desired height from the floor. We offer variety of laminar flow units and custom made sizes. Following are some of the main features of our unit: more...
We offer superior quality pass boxes that are complete in it-self and can be installed at clean room’s entrance. This box facilitates the minimization of the particulate contamination amount that enters the clean room with the help of reducing operator traffic.
Features:
more...
Our dispensing and sampling booth are used for weighting and dispensing of critical pharmaceutical and other powders. These provide down flow of HEPA filtered clean air, thus creating clean environment in the area where powder is being dispensed. It also protects the worker, who is working inside from accidentally inhaling the powder fumes as the air bound powder gets trapped in the suction filter at the bottom. The technical specifications of our product are: more...
Clean rooms and clean room equipments such as laminar air flow units are a major capital investment planned to offer you with a contamination- controlled environment.
Available with us are Vertical Laminar Air Flow that are fabricated as per the international standards and offered at industry leading prices. They are in high demand in the global market and are also availed in customized ranges. Moreover, we also package consignments as per the requirements of the clients. Our exclusive range finds wide application in different areas and industries. Owing to our dedicated service over the years we have been able to achieve the reliance of our clients worldwide.
Our exported array functions in the following manner : more...
We offer Class 100 powder dispensing and sampling booth that are provided with open-fronted design. This design is very convenient this type of in terms of providing access to the operator and material. It is widely used in systems that require high degree of flexibility. With the help of air movement containment is achieved and our range of
down-flow booths and workstations can be availed in different air-handling models.
In normal conditions, the air is pulled through the main working chamber to exhaust grills that is located near the rear of the booths. This suppresses the air-borne dust away from the operators breathing zones.
Standard Sizes:
more...
Our Sampling & Dispensing Booth are ideal for sampling raw materials with a clean environment providing complete protection of the operator and the product from external contamination. They are in high demand n the global market and are designed to perfection conforming to the US Federal Standards 209 E. They are also availed in customized ranges and offered in industry leading prices. The essential attributes of our exclusive gamut includes the following : more...
We import and supply a huge assortment of cleanroom consumable. Available in diverse designs and models to suit the specific clean room requirements of our clients, our innovative products includes the following:
more...
We are one of the leading manufacturer and exporter of Clean room Pass through box which are used to minimize the traffic and contamination entry into clean room. These are available with the following features: more...
We offer a range of clean room equipment, which are known for their efficient performance and low power consumption. Available in tailored options, our range of clean room equipment are in line with the international standards.
Usage:
more...
We manufacture a wide range of pass boxes that helps in transfering goods inside and outside the rooms. These are made of stainless steel sheets, mild steel, and galvanized sheets . These pass boxes are available in static and dynamic type.
Features: more...
We present a variety of pass boxes that are available in mild steel sheets, galvanized sheets, stainless steel sheets, commercial block board with laminates as per customers’ requirements. These pass boxes can be easily installed on the wall between classified area and non classified area and are widely used for transferring materials into clean room without disturbing its environment. We provide dynamic and static pass boxes that help to protect clean room from contamination without opening room door and using interlocking type doors of pass box. Our pass boxes are provided with interlocking of aluminum glass windows with powder coating on both sides and are noiseless and vibration less in operation.
Clean Room Products For Pharma Industry Medical and pharmacutical clean room proudcts and sanitary fittings with triclover fittings. more...
We offer to our clients clean room garment cubicle with following features: more...
We bring an array of clean rooms that provide fresh and pure indoor by removing bacteria, virus and other contaminated particles present in the air. Our company assures clean rooms with complete control of impure particles and is designed in such a manner that it minimizes the introduction, generation and retention of particles inside the room. These high quality clean rooms are capable of controlling temperature, humidity and pressure as per clients’ requirements.
We offer a variety of air modules that are available in mild steel sheets, galvanized sheets, stainless steel sheets, commercial block board with laminates and many more for our esteemed customers. These air modules are powder coated on both sides and are capable to operate without noise as well as vibration. Our air modules are available in various sizes depending upon clients’ requirements as well as specifications.
Category Matches
Related Trade Leads
|
|
We established our brand scanair is engaged in the manufacture of
refrigeration equipment since 1996. The soul purpose of its existence
is to provi... (Sell) |
|
|
We are offering comprehensive range of Clean Room Material like:
61656; Head Covering
61656; Face Masks
61656; Antistatic Aprons
61656; An... (Sell) |
|
Offering clean room equipments/ consumables :
- We provide you the products that are: Laminar air flow/ air curtains/ bio safety units/ pvc strip... (Sell) |
|
|
We offer clean room equipment, clean air systems, cleaning equipment and
air cleaning equipment.
Usage:
* Providing clean air
* Sui... (Sell) |
|
|
We are offering diversified range of clean room equipment like :
- Air Showers
- Laminar Flow Benches
- Pass Boxes
- Clean Rooms
- Clean Room... (Sell) |
Tender Notifications
