 |
 |
 |
 |
|
|
 |
|
|
||||||||||||
|
Products Directory > Scientific Instruments & Supplies > Testing Equipment & Machines >
Cement Testing Equipment
Products - 51
|
Cement Testing Equipment |
Displaying 1-34 of Total 34 Products Found |
Products
The Autoclave is suitable for conducting accelerated soundness test on cements or the autoclave expansion test requiring constant steam pressure with the correspondent constant pressure. It is consists of a stainless steel cylinder with a welded heat insulated voer, mounted on a sturdy supporting frame, enclosed in a heat insulated metel housing, attractively finished. The attached control unit encloses sensitive pressure regulator and pressure gauge, power switches and pilot lights for controlling the electric heating units inside Chamber Dimension-15 cm dia meter x 40.5 cm height suitable for operation on 230 v, 50 hz, Single phase, A.C. supply. Supplied complete with test bar holder Special rack to hold specimens above water level in the autoclave and in vertical position to expose them in the same manner
a) Made of Stainless Steel Inside
b) Made of Mild Steel Inside more...
|
Rajco Scientific And Engineering Products
  |
|
The apparatus comprises one each of permeability Cell “U” tube manometer with stop cock mounted a sunmica wooden stand, perforated metal disc, plunger, Rubber, Stopper, Rubber tube with rubber bulb.
Accessories :-
Dibutylphthalate liquid (500 grm bottle) Punch.
Spares :
a) Sunmica wooden stand with ‘U’ tube monometer with stop cock.
b) Permeability Cell complete with perforated metal disc, non -perforated disc and plunger. more...
|
Rajco Scientific And Engineering Products
|
|
Consists of a hard wood base with vertically mounted metal studs as specified in the IS : 2386 (Part-1) more...
|
Rajco Scientific And Engineering Products
|
|
Consists of slump cone fitted with handles and foot pieces in position. Base plate in octagonal shape two clamps slide over the foot grips of a standard slump cone and hold it securely while filling and rodding. A Combination swivel carrying handle. Complete with graduated temping rod 0-60cms long and 16mm dia with 0-30cms scale graduation.
Accessories :-
Slump Cone 10cms top dia, 20cms bottom dia and 30cm height. more...
|
Rajco Scientific And Engineering Products
|
|
Determining the aggregate Impact value of coarse aggregate. Consists of a base weighing between 22-30kg with a lower surface of not less than 30cms and support columns to from a rigid frame work around the quick re. lease trigger mechanism to ensure an effective free fall of the hammer during test. The free fall can be adjusted through 380 + 5.0mm. The hammer is provided with a locking arrangement. A metal tup (Hammer) weighing13.5 to 14.0 kg. The lower end in cylindrical shape, 100mm in diameter and 5cm long with a 2mm chamber at the lower edge and case hardened.
Complete with a cylindrical cup, 102mm dia x 50mm depth, One measure 75mm dia x 50mm deep and tamping rod of circular cross section 10mm in diameter and 230mm long rounded at one end. more...
|
Rajco Scientific And Engineering Products
|
|
We manufacture California bearing ratio, which are of good quality. These products are useful in laboratory testing. Apart from , our products are cost effective.
Consists of a stainless steel cylinder with an insulated cover. Mounted on a sturdy supporting frame, enclosed in a heat insulating metal housing. The attached control unit enclose a sensitive pressure regulator and pressure gauge, power switches and pilot lamps for controlling the electric heating unit. Inside chamber size; 15 cms dia x 60 cm height.
We present advanced digital compression testing machine which is designed to conduct compression and crushing strength tests on containers, concrete cubes & cylinders, hollow blocks and various other materials in accordance with Indian and/or International standards. Our machine is operated electro-hydraulically and can be accommodating to test jobs up to 45 x45 x 65 cm high depending upon machine capacity. Its loading unit comprises of a cross-head and have solid pillar base or channel supports connecting the base and cross-head firmly. Its control panel has a hydraulic power pack, digital readout system, operating switches, load control valves, maximum load holding facility (Peak-hold), preset facility on load-over 10% and 90% of working range. It gives optional output print-out of test data and graph. Options: Capacity ies available: 100KN ,500KN, 1000KN, 2000KN & 3000KN. Flexure Test Attachment Concrete Beams, etc. Printer Panel for printout of test data and graph. more...
We are a renowned manufacturer of core cutter with dolly and rammer that is fabricated using quality raw material. Designed in accordance with IS: 2720 (Part XXIX) 1966, our array of core cutter is widely renowned for effective functioning and performance during usage. It is provide with a cylindrical core cutter which is130mm high and 100mm in diameter. The apparatus consists of: more...
We offer accelerated curing tank which is highly appreciated among our valued clients for its simple configuration and user friendly operation. The inner chamber is fabricated using S.S, outer body mild steel which is duly powder coated, hence it is appropriate to accommodate 6/12 cube moulds of 150 mm. Below mentioned are its noteworthy features:
• Temperature controller cum indicator
• Water circulation pump
• Calibration certificate is provided for digital controller
This instrument is used for determining the normal consistency and setting times of cement and 'A' Class limes.
Specifications :
The apparatus consists of a metallic frame bearing a freely movable rod with a cap at top, one vicat mould, split type and glass base plate and one set of needles one each initial needle, final needle and consistency plunger. Fitted with Dash pot. more...
We offer wide range of concrete testing equipment that are used in the testing of cement and concrete. These testing equipment are widely used by builders and contractors for testing of building materials. Our technically sound equipment is known for accurate testing of the cement and concrete. Wide range of equipment offered by us includes: more...
We offer various types of testing equipment for cement tests. The equipment’s used for cement testing includes Flow Table, Heat of Hydration, Jolting Test Apparatus, Planetary Mixer, Permeability (Pozolona) and Vibrating Machine.
Flow Table
more...
The cement testing machine, concrete testing machine and soil testing machine that we manufacture are durable and easy to use. These testing machines yield accurate results and can function non stop for hours. Capable of withstanding high pressure, these cement, concrete and soil testing machines are largely used by clients in the construction industry.
Our cylindric mould are manufactured as per Ref Std :IS 10086. These are high in efficiency and their working. Our moulds are available in cost effective prices. These can easily sustain in extreme climatic situations and can easily resist distortion. Further, these retain their shape and size even under rugged conditions. Following are the size specifications of cylindrical moulds: more...
Making the best use of our
manufacturing and sourcing resources, we offer a wide range of cement testing machine. Some of them
:
more...
This is used for compacting concrete into Cube Moulds. This rod is made of steel. It is 16mm diameter, 60mm in length and rounded or bullet shaped at one end.
Our range of slump test apparatus are used for determination of slump of fresh concrete mix as a measure of its consistency where the nominal size of aggregate does not exceed 38 mm.
The apparatus comprises the following: more...
VICAT NEEDLE APPARATUS
IS 4031, 2645,2542 (PART-1), 1 727, 5513 & 712. BS12, 146, 915, 1370, 4027, 4246, 4248, AASHTO T 129, E131.
This instrument is used for determining the normal consistency and setting times of cement and 'A' class limes.
SPECIFICATION:
The apparatus consists of a metallic frame bearing a freely movable and with a cap at top, one vicat mould and" glass base plate and one set of needles one each initial needle, final needle and consistency plunger.
VICAT NEEDLE APPARATUS WITH DASHPOT
IS4031,2645,2542 (PART-1), 1727, 5513,5513 & 712. BS 12, 146, 915, 1370, 4027, 4246, 4248, AASHTOT129, E131
SPECIFICATION:
Some as Zl 1003 but in addition is fitted with a dashpot which facilities gentle lowering of the needles.
ACCESSORIES:
Mild steel base plate 5 inches x 5 inches.
Fulcrum mould, brass, 70mm i.d. base dia x 60mm i.d. top dia, 40 mm more...
Specifications :
The Apparatus consists of one slump cone with handles and foot pieces. The slump cone has internal dia 20cm at base 10cm top dia and 30cm height. Foot pieces can be fixed to the clamps on the base plate. The base plate has lifting handle for easy transportation. One graduated steel rod 16mm dia x 600mm long, rounded at one end and graduated in mm is also supplied. more...
We offer universal testing machines, which are fast, accurate, & simple to operate. In our machines, the load and displacement are displayed on the digital display system in their respective engineering units. Further, our range is also incorporated with digital display unit have RS232 communication port. When our range is connected to computer online graph can be displayed on the screen. Moreover, our range is supported by windows based software, which can store, retrieve readings as per the requirement of the user.
Our range can perform the following tests: more...
The apparatus is used for determining the fineness of cement in terms of specific surface expressed as total surface area in square centimeters per gram of cement. This is a variable flow type air permeameter.
Our beam mould are made of supreme quality metal which is why these are strong enough to resist distortion. These even retain their shape and size even under rugged conditions. From our end, we offer moulds of different sizes for cube, beam & cylindrical moulding which are required for compressive strength testing. These are manufactured in the following sizes: more...
We offer compression testing machine with digital readout unit, which are incorporated with load frames and designed to withstand a few million times of full cycles of loading without any sign of distortion or fatigue. These frames are light in weight and the base carries a fine finished hydraulic ram and the lower platen. In addition to this, the top plate has the spherical seating to take care of any irregularity of the specimen surface or slight misplacement of the specimen from the central position.
Moreover, our range also consist of pumping unit, which is attached on the right hand side of the loading unit. It is a multi plunger pump submersed in the tank and is powered by 1.5 kW electric motor.
We also add power pack, which gives non-pulsating flow to the hydraulic ram to ensure smooth loading of the specimen which can be seen by the movement of the load gauge/digital display. Further, the flow of the oil can be precisely controlled by the strain control knob located at a more...
Compression Testing Machine 2000 KN (200 Tons)
Compression Testing Machine 2000 KN (200 Tons) Capacity (Four Pillar Model) Electrically Operated fitted with dual display i.e load gauge 0-2000 KN x 10 KN/ Division and Digital Load Indicator 2000 KN x 1 KN/ Division. The micro switch fitted in load gauge and relay contact in digital load indicator to protect the machine from overloading. The machine is suitable for operation on 440V, 3-phase, Ac supply more...
This is a brass tube approximately 53cm long and 2.8cm I.D. with a wooden handle. Total length approximately 73cm. The tube has the sharp angular edge which conveniently pierces cement bags. An air hole of approximately 3mm dia is drilled on the near handle. Total sample collected at one time is 300cm 3 approximately.
We manufacture the proctor compaction mould as per ref Stds : IS 2720 (Part 7), IS 2720 (Part 8), IS 9198, IS 10074, BS 1377 ASTM D 698 and ASTM D 1557. Supreme quality metal is used so that it is enough strong to resist distortion & retain their shape and size even under rugged and extreme conditions. more...
We are engaged in offering moulds of varied sizes for cube, beam & cylindrical moulding which are required for compressive strength testing. Our premium moulds are made of high quality metal. These are strong in design and enough to resist distortion & retain their shape and size even under rugged conditions.
Our range of universal testing machine autopacer are designed for the automatic pace setting arrangement. The pace setting of our machine is achieved through a combination of advanced electronic and hydraulic system. Further, the pacing speed is programmed through the computer key board which is directly displayed is engineering units on the computer screen.
In addition, our range is incorporated with the proportional valve that have a drive card, which corrects the error between the feed and the follower signal and the follower signal and makes the machine to run at a set speed irrespective of any specimen behavior.
The computer is used for high speed data acquisition and controlling card (DAQ). This keeps the pace rate within the limits of ±2% of the programmed valve and on line graph of load vs. displacement is shown on the screen where as in the off line it gives the total details on the listed specimen, like breaking load, elongation at breaking load, shear value, more...
This is for determining the lateral extension of 15cms dia x 30cm high cement concrete cylinders while testing them under compression.
The design of concrete mix is aimed at maximum durability for the conditions prevailing at the site where it is to be used. Ability to resist the flow of water through, is one of the important durability characteristics. The permeability is determined on cement, mortar and concrete specimens, either cast in the laboratory or obtained by cutting out cores from existing structures. more...
We present cube mould with base plate which are available in different size. These are according to Indian and British Standards. For the metric size cube moulds the faces are machined flat to +/-0.2mm accuracy and finished to within 0.2mm. For the inch size moulds, the faces are machined flat to +/-0,01 inches and finished to within 0.01in. Following are some specifications of our product: more...
Specifications : These are available in different sizes and are made according to Indian and British standards. For the metric size cube moulds, the faces are machined flat to 0.02mm accuracy and finished to within 0.02mm. For the inch size moulds, the faces are machined flat to 0.01 inches and finished to within 0.01 in. All moulds are supplied complete with base plate.
Mould Cast iron, for 50mm, Cube
Mould gunmetal, for 50mm, Cube
Mould steel for 7.06cms cube with loose base plate.
Mould Cast iron for 7.06cms cube with loose base plate.
Mould Cast iron, for 10cm cube 153 with "ISI" mark.
Mould Cast iron, for 15cm cube 155 with "ISI" mark.
Mould Cast iron, for 20cm cube
Mould Cast iron, for 30cm cube more...
Our range of Los Angels abrasion testing machine are used for estimation of abrasion value of coarse aggregate. These comprises of the following: more...
Category Matches
Related Trade Leads
|
|
Compression Testing Machine (Electrically Operated) - Four Pillar type.
It is an electric cum hand operated for compression tests on concrete spe... (Sell) |
|
We are interested for Hand operated compressive Testing Machine for
testing Cement Capsules of 7 cm x 7cm x 7cm capacity 0-20 tonnes.
Accuracy 20... (Buy) |
Tender Notifications
B2B Newsletter Subscription
