 |
 |
 |
 |
|
|
 |
|
|
||||||||||||
|
Products Directory > Electronics & Electrical > Electric Fittings & Components >
Bus Ducts
Products - 23
|
Bus Ducts |
Displaying 1-24 of Total 24 Products Found |
Products
We are engaged in manufacturing quality and highly efficient bus duct. These bus duct are fitted with world class components and are easy to install. Moreover, these ducts have lower impedance, voltage drop, interference and energy consumption. Moreover, our bus duct are easy to maintain and have larger short circuit current capacity. more...
Bus ducts are basically required for handling large current especially above 3000Amp These are used between mains transformer / D.G. Set to Main PDB / PCC panels. In higher Ammper rating cable termination becomes problem & bus duct is only solution for this.
L.T. Minipillars are used to distribute the power to small consumers in a apartments, commercial complex etc. Main supply is protected by HRC fuse set.
L.T / H.T. Feederpillars are used for distribution of power to more feeders from main.
The main power is terminated on bus bar & various tappings are taken for feeders in different parts of system in L.T. Feederpillar. All feeders are protected by HRC fuse Set. more...
Presenting a range of bus ducts and rising mains that are available upto 4000 A, which can be operated with less than 35 degree Celsius Temperature Rise over an Ambient of 40 degree Celsius. Their short circuit withstands capacity falls at 50kA. The non-segregated bus ducts with inter leaving design are aptly designed for indoor and outdoor installation with IP: 55 degree of protection. All our bus duct systems are type tested with Erection & Commissioning services. We are pioneer in design, engineering & manufacturing of various types of bus ducts and bus trunking systems like: more...
We manufacture highly efficient HT/LT Bus Duct with a capacity up to 12 KV. This is offered with both indoor and outdoor construction with IP42/55 degree of protection. The type of busduct are offered in aluminium and copper based and manufactured as per the International Standards. The device is - 8623-2/1993 for low voltage up to 1kv busbar trunk systems and IS- 8084-1992. The Bus Duct is specially developed for voltage above 1kv up to and including 36kv. The metal enclosed bus systems are based on design parameters and service conditions as per the application of bus ducts which follows:
• Non-segerated/segerated /Isolated phase,cross overchamber,vertical /horizontal .
• Bus-duct calculation for Designing Carrying conductor ,Heating effects, Thermal effects ,electro dynamic force, Voltage drop
• Skin & proximity effects in the terms of busbar reactance,etc.
• Low more...
Our organization is involved in offering a wide range of bus ducts and bus trunking as per the demands of our esteemed clients. These are designed in accordance with the international standard to ensure flawless product in the final range. Further, final testing of our range is carried out thoroughly with all calibrated instruments and gauges that help to deliver supreme quality products.
Various types of Bus Ducts and Bus Trunking Systems include : more...
Our firm is recognized as one of the reputed manufacturers of superior quality bus ducts. These bus ducts are widely used in various industries for sensing the already existing conditions like earth fault, over current flow and winding temperature. The ducts are fitted with diverse components of highest industry standards that give a long working life and ease of operation.
Our organization is one of the leading organizations involved in the manufacturing and supply of Bus Ducting. A bus duct system is actually an effective method of distributing power to the switchgear and can handle various loads. Our range of Bus Ducts is utilized for the effective and efficient supply of electricity in mainly industrial sectors. We utilize high grade copper or aluminum to fabricate our range of ducting, which is further insulated and enclosed. This offers enhanced protection to the dusting against mechanical damage and dust accumulation. more...
We offer a wide range of bus trunking systems, which are suitable for power distribution within any installation. These bus trunking systems are widely used in diverse industries, commercial, residential buildings, airports to make connection between transformer and LT panel. Further, our range of bus trunking systems is easy to install, flexible, easy to expand and change the layout.
Our domain expertise allows us to manufacture and supply a wide range of Electrical Bus Ducts. Our entire range is precision engineered and helps to reduce the cost and requires minimum installation space. These ducts are fabricated using steel plants and aluminum bending to enhance durability and functionality in the final product. Our range is extensively used in cases where very heavy current passes through electrical equipment or in which distribution of heavy current in a building is required. more...
Our range of LT bus duct is high in demand and widely appreciated for quality standards. Fabricated using quality raw material, it assist in the high power transmission of more than 2500 amperes from the transformer to the main electrical distribution panel. We have a capacity of manufacturing up to 3-meter long bus duct in one piece. Widely acclaimed for easy operation and installation our array is further featured with: more...
We are one of the reliable names in manufacturing bus ducts that matches with the highest quality standards. These are in demand for a spectrum of industrial applications and thus have managed to collect accolades from various organizations and financial institutions such as HCL technologies, ICICI BANK. Following are some of its features: more...
We are engaged in manufacturing bus ducts which are known for its effective functioning among our valued clients. With the recent introduction of canalized bus duct, which is the complete bus duct and our range gives complete design, engineering and erection services. Below mentioned are its specifications and features:
Low Voltage Bus Ducts:
more...
Our range of bus trunking, electrical rising main is available in 415V segregated bus duct, non segregated bus duct forms manufactured from high grade raw material; these electric bus ducts are quality tested o well defined quality parameters before being delivered to our clients based across the nation. We also meet customized requirement and offer these at competitive prices.
We have been offering a precision engineered range of bus ducts which is manufactured with excellence.
Types : more...
We offer bus ducts that are fabricated by using high grade raw material as per the industrial requirements. These are extensively applicable to sense different conditions as well as for proper operation of the corresponding devices. Our range is available with compact design and is also used for co-coordinating electric supply to other equipment in an economical way. more...
The products that we are designing and developing are widely used by various industries for their productive functioning .Our range of Bus duct are manufactured using superior quality aluminium are widely used by various power generation plant having absolute X-Ray quality T14 welding facility.
Specification more...
We offer bus duct & rising boards that are available in various capacities. These are designed for indoor and outdoor installation. We offer these bus ducts in various types such as: more...
Bus ducts up to 8,000 amp rating are totally enclosed type having robust construction. Bus ducts are designed to provide ease of inspection & maintenance. Enclosure type can be designed to suit indoor or outdoor installation. Space heaters, silica gel breathers are provided to minimize moisture content inside the bus duct. Individual bus sections are properly joined to minimize voltage drop & avoid heating. Flexible connections are used at end termination points. Rubber bellows can also be provided at termination point against specific requirements. Expansion joints are used if straight length of any section exceeds 6 mtr. Suitable sized earth bus is provided from out side at the bottom which runs parallel to the bus duct. FRP shielding plates are used in wall crossing units to ensure plant safety. Bus bars of copper or aluminum are selected to meet the continuous current rating and desired short circuit levels in single tier or double tier dispositions and in both interleaved
Magna Enterprises manufactures and supplies matchless quality Aluminium Bus Ducts/Copper Bus Ducts of various capacities for Normal and UPS power supply. Rising Mains of capacity 2000A is designed, fabricated and erected at RMZ Millenia, Chennai for M/s Ford India Information Technology Services. Bus Duct of capacity 2000A is designed, fabricated and erected for M/s Ford India Pvt Ltd at Maraimalai Nagar for their Engine Plant manufacturing facility. These products are manufactured using the finest raw materials and highly sophisticated machines. Professionals who manufacture Bus Ducts/Rising Main have expertise over it. Our company, Magna offers a wide range of comprehensive Bus Ducts/Rising Main, which is reliable, durable and available at highly cost-effective prices.
The range of bus ducts offered by us is manufactured in compliance with the verified industrial standards. These are extensively used for proper operation of the corresponding devices and use to carry power from transformer to the panels. The bus ducts are offered in compact design and known for co-coordinating electric supply to other equipment in an economical way.
more...
Our range of Bus Ducts is manufactured using premium quality raw material and is at par with the standards of the industry. The range can sense different conditions and is known for its excellent operation of the corresponding devices. Features: more...
Bus Duct & Cable Erection
Main LT Panel & Bus Duct at Fortis Hospital:
Panel & Bus Ducts at Varun Beverages at Kosi, UP:
Category Matches
Related Trade Leads
|
|
Offering to sell-
*Bus ducts
*LT bus ducts
*HT bus ducts
*Horizontal bus ducts
*Vertical bus ducts
*Non-segregated bus ducts
*Segregated bu... (Sell) |
|
We offer a wide range of Bus Duct Chamber as per the drawing and
specification provided by our clients. These are available in
standardized as well... (Sell) |
|
We are offering excellent range of bus duct with the following
features like:
- Superior quality
- Available in various specification
- Easy to... (Sell) |
|
Bus duct:
Looking for fabrication and erection of 415v following rating tpn non phase segregated bus duct made out of 2mm thick crca sheet with p... (Buy) |
|
We are offering a wide range of bus trunking systems, which are suitable
for power distribution within any installation. These bus trunking
systems... (Sell) |
Tender Notifications
B2B Newsletter Subscription
