Products Directory > Mechanical Parts & Spares > Valves
Displaying 1-50 of Total 83 Products available.
Bleed Valve
- Leading Supplier 8yr Industrial Valves Shason Enterprise, Mumbai
A bleed valve is a hydraulic manifold that combines one or more block/isolate valves, usually ball valves, and one or more bleed/vent valves, usually ball or needle valves, into one component, for interface with other components (pressure measurement transmitters, gauges, switches, etc.) of a hydraulic (fluid) system. The purpose of the block and bleed manifold is to isolate or block the flow of fluid in the system, so the fluid from upstream of the manifold does not reach other components of more...
Address: J. K. Chambers, No. 77/83, Nagdevi Street, Masjid Bunder , Mumbai - 400003, Maharashtra, India Phone: +(91)-22-40231230Preferred Number: 8376808271 Website: http://www.shasonenterprise.com/
- 6yr Block Valves and Bleed Valves Micro Precision Products Pvt. Ltd., Faridabad
The Block Valves and Bleed Valves we offer are widely used for isolation, bleeding and calibration of gauges and switches. Provision for isolation bleeding & calibration are combined in this compact unit. Apart from this, NPT (F) connection is provided for bleeding the process to a receiving zone. more...
Address: 3, Link Road, Sector-28 , Faridabad - 121 008, Haryana, India Phone: +(91)-129-4094900Preferred Number: 8376806899 Website: http://www.valvemanifold.net/
- 4yr Bag Bleed Valve Medi Safe International, New Delhi
We offer Bag Bleed Valve to our prominent clients. The Bag Bleed Valve inserts into the tail of the Breathing Bag. The Bag Bleed Valve is used to release the pressure of breathing Bag.
Features:
* High Grade Raw Material
* Reusable.
* Autoclavable: 134°C.
more...Address: No. 530, West Parmanand Colony, Near Tagore Park, New Delhi - 110009, Delhi, India Phone: +(91)-11-27650687Preferred Number: 9953354238 Website: http://www.medisaferesuscitators.com/
- 9yr Two Valve Manifold Block and Bleed Fluid Controls Private Limited, Mumbai
Two Valve Manifold Block And Bleed On Asa - Rf Flange
Designed for one-piece block and bleed assemblies for primary isolation of pressure take-offs, where the valve is directly mounted to the vessel or process pipe. Instruments may be directly mounted to the valve outlet or alternatively remotely mounted with gauge lines/impulse pipe work.
Features:
more...Address: J. V. Patel, I. T. I Compound, B Madhurkar Marg, Opposite Elphinstone Road Station West , Mumbai - 400 013, Maharashtra, India Phone: +(91)-22-43338000Preferred Number: 8447557327 Website: http://www.indiamart.com/fluidcontrols/
- 10yr Block & Bleed Manifold Valves Apurva Enterprises, Mumbai
When it comes to manufacture precision engineered 2-valve Block & Bleed Manifold, we are a widely recognized name in the markets. Being a quality oriented organization, we fabricate our range using premium grade materials. Moreover, these valves undergo different tests to ensure their dimensional accuracy within the tolerance levels.
more...Address: 7, Vijay Estate, Rajawadi, Ghatkopar East , Mumbai - 400 077, Maharashtra, India Phone: +(91)-22-23443348Preferred Number: 8376807292 Website: http://www.indiamart.com/apurvaenterprises/
- 10yr Block Valves and Bleed Valves IPS Automation Products Private Limited, New Delhi
The M2VM40 series Block and Bleed Valves we offer are widely used for isolation, bleeding and calibration of gauges and switches. Provision for isolation bleeding & calibration are combined in this compact unit. Apart from this, NPT (F) connection is provided for bleeding the process to a receiving zone. more...
Address: No. 202 & 208/22, Gaurav Tower, P.V.R. Complex, G-Block, Vikas Puri, New Delhi - 110 018, Delhi, India Phone: +(91)-11-28540302Preferred Number: 8377802363 Website: http://www.indiamart.com/ips-automationproducts/
- 3yr Instrumentation Valves Block & Bleed Valve Jayantilal Bros., Mumbai
Applications :
* Installation of instrument and gauge
* Isolation of Instrument
* Venting of Instrument
* Liquid and vapor service
more...Address: No. 25, Rashid Chamber, Shop No. 29, Abdul Rehman Street, Pydhonie , Mumbai - 400 003, Maharashtra, India Phone: +(91)-22-23424940Preferred Number: 8377804283 Website: http://www.indiamart.com/jayantilalbros/
- 13yr Bleed Valves Durga Trading Company, New Delhi, New Delhi
We are manufacturer and supplier of Bleed Valves for our customers. These bleed valves can be used on instrumentation devices such as multi-valve manifolds or gauge valves to vent signal line pressure to atmosphere. more...
Address: No. 1679 / 6, Dakhni Rai Street, Daryaganj , New Delhi - 110002, Delhi, India Phone: +(91)-11-23283669 Website: http://www.indiamart.com/durgatradingcompany/
- 3yr Bleed Valves Repute Engineering Works, Thane
Features :
* Bar Stock design.
* Prossure rating 6,000 PSI.
* Option of regulating method.
Materials Of Construction
*Carbe Steel bodies are plated with cadinum white dichromate for corrosion protection.
Technical Data
Part No. & Table Of Dimensions
All dimensions shown are for reference only and are subject to change.
more...Address: Gala No. 4, 5 & 18, 19, Akshay Industrial Estate, Navghar, Vasai Road East, Thane - 401 208, Maharashtra, India Preferred Number: 8376807130 Website: http://www.indiamart.com/repute-engineering/
- 11yr Bag Bleed Valve Resuscitations, New Delhi
Backed by rich industry experience, we are engaged in retailing and supplying high quality range of Bag Bleed Valves. These bag bleed valves are fabricated using light weight delrin and are offered with adjustable orifice. Furthermore, these products are inserted into the tail of a breathing bag. Our products are stringently tested on various parameters to make sure that we are offering unquestionable quality products. Due to our finest quality products, we have set benchmark in the more...
Address: No. 15, B- Block, Dilshad Garden, Opposite State Bank of India , New Delhi - 110095, Delhi, India Phone: +(91)-11-22135046 Website: http://www.indiamart.com/resuscitations/
- 4yr Block And Bleed Valve Laxmi Engineering Enterprises, Mumbai
Gauge Valve is a Block And Bleed Valve pattern gauge valve with specially designed integral bleed. Ideal for use on applications requiring bleeding or venting of media. Self centering needle non-rotating, on the valve seat. The conical metal tip (stem type ct) press fitted ensures perfect alignment for positive bubble tight shut-off. Standard end connections are male inlet and female outlet or female inlet and female outlet from ¼” to ¾”. more...
Address: Unit No. 1, Kulgurukrupa Society, Tilak Nagar, Dargah Cross Road, Sonapur, Bhandup West , Mumbai - 400 078, Maharashtra, India Phone: +(91)-22-25966589Preferred Number: 9953356572 Website: http://www.indiamart.com/laxmi-engineering-enterprises/
- 4yr Gauge Valve - Block & Bleed A. R. Hydraulics Fittings Pvt. Ltd., Mumbai
The company is supported by a dexterous team of professionals, who strive to deliver high-end quality range of Gauge Valve - Block & Bleed. Our modernized manufacturing plant is operational with technologically advanced machinery. This helps us produce flawless products for the clients as per the prescribed industrial standards. Apart from this, these products are designed using high grade materials at our in-house manufacturing unit.
Features: more...Address: No. 7/3, Mominpura, Patra Chawl, M. S. Ansari Marg, Agripada, Byculla West , Mumbai - 400 011, Maharashtra, India Phone: +(91)-22-64528467 Website: http://www.indiamart.com/arhydraulicsfittings/
- 3yr Air Bleed Valves Sri Nageshwar Hydraulics, Kanpur
Features:
* Maximum Flow: 10 litres to 75 litres (ST-1004-5) and over 75 litres (ST-1004-10)
* Maximum operating pressure: 250 kgf/cm2
* Cracking pressure: 3.4 kgf/cm2
more...Address: No. 119/4, Zarib Chowki, GT Road , Kanpur - 208012, Uttar Pradesh, India Phone: +(91)-512-2544815Preferred Number: 9953361997 Website: http://www.indiamart.com/sri-nageshwar-hydraulics/
- 4yr Bleed/Purge Valve
Aircon Engineers, Noida
Bleed/Purge Valve (BV& PG Series)
Address: C- 412, 1st Floor, Sector- 10 , Noida - 201301, Uttar Pradesh, India Phone: +(91)-120-4238882 Website: http://www.indiamart.com/aircon-engineers/
- 5yr Bleeder Valve
Joshi & Jampala Engineering Private Limited, Satara
Fabricated valve used for venting / bleeding of gases.
• Cone and sphere sealing geometry achieves high degree of isolation.
• In special designs soft seals / double sealing arrangement can be provided.
• Dead weight is used to keep the valve closed.
• Electrical or manual which is used to operate the valve.
• Sizes- 100 NB to 600 NB. more...Address: M - 64, Additional M. I. D. C. Area, Satara, Satara - 415 004, Maharashtra, India Phone: +(91)-2162-240097 Website: http://www.indiamart.com/joshi-jampalaengineering/
- 2yr Bleed Valve & Gaiters
Ganpati Auto Traders, Patiala
Bleed Valve & Gaiters
Address: 28 A, Kissan Market Sirhind Road , Patiala - 147001, Punjab, India Website: http://www.indiamart.com/ganpati-autotraders/
- 3yr Block And Bleed Valves
Super Technical (India) Private Limited, Mumbai
Block And Bleed Valves
Address: 501, Samarpan Complex, Chakala, Andheri - East , Mumbai - 400099, Maharashtra, India Phone: +(91)-22-28323760 Website: http://www.indiamart.com/super-technical-limited/
- 4yr BLOCK AND BLEED VALVE
Suraj Enterprises, Mumbai
guage valve is a block and bleed needle valve pattern guage valve with specially designed integral bleed. Ideal for use on applications requiring bleeding or venting of media. Self centering needle non-rotating,on the valve seat. The conical metal tip(stem type ct) press fitted ensures perfect alignment for positive bubble tight shut-off. Standard end connections are male inlet and female outlet or female inlet and female outlet from ¼” to ¾”. more...
Address: Unit No.103, Shiva Industrial Estate, Lake Road, Bhandup West, Mumbai - 400 078, Maharashtra, India Phone: +(91)-22-25280447 Website: http://www.indiamart.com/surajenterprises/
- 2yr Continuous Bleeding And Venting Valves
Sherman International Private Limited, Delhi
For larger air volumes, e.g. on sand filters, stainless steel float and lever control the valve shut-off, EB 1.11 with external float, EB 1.20 for maximum air volumes | valve cone with soft or metallic seal | body made of GGG-40, GS-C25 | for contaminated and foaming media, available with various coating types.
Address: D- 94, Himalaya House, K. G. Marg, Delhi - 110001, Delhi, India Phone: +(91)-11-23356147 Website: http://www.indiamart.com/sherman-international/
- 3yr Double Block and Bleed Valve
Karthik Enterprise, Secunderabad, Secunderabad
We fabricate superior Double Block and Bleed Valve which is precision made to control the movement of fluids and gasses in very extreme conditions and this sturdy valve has passed all tough tests with élan. As the name suggests this is really able to double block the flow with unmatched efficiency. Our team of experts ensures that this precision crafted product should all requirements of the clients without putting him into trouble. This high quality product comes at a very more...
Address: No. 4- 6- 36 To 38, Salandri Market, Shop No. 2, Pan Bazar, Ranigunj, Secunderabad - 500 003, Andhra Pradesh, India Phone: +(91)-40-27700311 Website: http://www.indiamart.com/karthik-enterprise-secunderabad/
- 5yr Bleed Valve & Gaiters Earthmover Parts
Amrit Overseas, New Delhi
Bleed valve & gaiters earthmover parts
Address: 2/134, Anand Parbat Industrial Area, Behind Central Bank Of India, New Rohtak Road,, New Delhi - 110005, Delhi, India Phone: +(91)-11-43708985 Website: http://www.indiamart.com/amrit-overseas/
- 4yr Bleed Valve
Creative Engineering Corporation, Mumbai
Bleed Valve
Address: Twelve Tenants Industrial Estate, Allana Compound Dr A. N. Nair Rd , Opp:- Agnipara Police Station, Mumbai - 400 011, Maharashtra, India Phone: +(91)-22-23015666 Website: http://www.indiamart.com/creative-engg-co/
- 4yr Bleed Valve
Arya Crafts And Engineering Private Limited, Bassein
Features :
* Bar Stock design.
* Prossure rating 6,000 PSI.
* Option of regulating method.
more...Address: No. 102, Vora Industrial Estate No.4 Navghar, Vasai Road East , Bassein - 401208, Maharashtra, India Phone: +(91)-250-2392246 Website: http://www.indiamart.com/arya-crafts-pvtltd/
- 3yr Double Block & Bleed Valve
Soum Valves & Fittings, Mumbai
Max pressure 6,000 PSI
more...Address: A-103, Samveda Viva Vedganga, Gokul Town, Bolinj, Virar West, Mumbai - 401 203, Maharashtra, India Website: http://www.indiamart.com/soum-valves-fittings/
- 5yr Monoflange Block And Bleed Valves
Flow Mat Engineering Private Limited, Chennai
Monoflange – Block and Bleed
This a general purpose instrument monoflange designed for connecting differential pressure transmitters or flow records to impulse line tubing. Connections are ¼”, ½” & ¾” NPT as per ANSI B1.20.1. All are thread milled high finish and high precision machined for better sealing efficiency.
Design Features:
* Compact design takes up less space in equipment, making it more...Address: F - 1, Sudarsan Apartments, Doctor Colony, Radha Nagar, Chromepet, Chennai - 600044, Tamil Nadu, India Phone: +(91)-44-42255716 Website: http://www.indiamart.com/flow-mat-engineering/
- 5yr Sterile Barrier, Block And Bleed Valve
Tecnik Fluid Controls Pvt. Ltd., Mumbai
we offer high quality sterile barrier, block and bleed valve more...
Address: C-410, Twin Arcade, Military Road Marol, Andheri (E),, Mumbai - 400059, Maharashtra, India Phone: +(91)-22-29208457 Website: http://www.indiamart.com/tecnikfluid-controls/
- 3yr Mono Flange Valve Single Block & Bleed
Tube Fit Engineers, Mumbai
Bonnet Assembly :
* Screwed bonnet design.
* Bonnet - back seated blow out proof.
* Spindle - ground and thread rolled.
* Packing below thread.
* Spindle tip - non rotating tip shut off type - hardfaced,
* Regulating - stellited and soft seated.
* Bonnet pusher - silver plated for anti galling freezing for increased stem cycle life.
* Dust cap protects stem threads from externals contamination.
* Leak tight seal with low operating more...Address: Unit No. 2 Industries, Village Waliv, Vasai East, Mumbai - 401 208, Maharashtra, India Phone: +(91)-250-2453813 Website: http://www.indiamart.com/tubfit-engineers/
- 4yr Bleed Valve
Tarang Steel, Mumbai
Bleed Valves are manual Bleed, Vent or Drain Valves. They can be used to vent signal line. Pressure to atmosphere before removal of an instrument or to assist in calibration of control devices.
Address: Office No 2 B, 110 Bhandari Street, Near Goldowal Temple , Mumbai - 400 004, Maharashtra, India Phone: +(91)-22-67432330 Website: http://www.indiamart.com/tarang-steel/
- 3yr Bleed Valves
Lodha Valves Industries, Ahmedabad
We offer bleed valves useful in controlling the movement of fluids and gases in very extreme conditions. Our team of experts ensures that this precision crafted product should all requirements of the clients without putting him into trouble. This high quality product comes at a very reasonable price for the purchaser. more...
Address: No. 19, Suryanarayan Society, Near Venugopal Society, Nicol Road, New Naroda , Ahmedabad - 380023, Gujarat, India Phone: +(91)-79-22731444 Website: http://www.indiamart.com/lodha-valves-industries/
- 5yr Bleed Valve
Maksel Engineers, Satara
Our enterprise is involved in providing the clients a wide range of Bleed Valve. It is free flow of air at outlet varies. These valves are made from very high quality raw material which ensures hassle free work performance at its user end. Widely finds its applications in various industrial sectors.
Operating Limits:
more...Address: B-4, M. I. D. C. , Satara - 415 004, Maharashtra, India Phone: +(91)-2162-244615 Website: http://www.indiamart.com/maksel-engineers/
- 4yr Double Block & Bleed Valve
NSSL Limited, Nagpur
NSSL double block and bleed valves may be furnished with or without the bleed valve assembly. Double block and bleed modular valves have evolved to replace the process of bolting together individual valves to provide dual isolation.
This new assembly provides great savings as much as 60% in weight and studies have shown that a 70% installation time saving is also possible. However the greatest savings are to be seen in the reduction of leak paths to atmosphere, therefore more...Address: T-45, MIDC Industrial Area, Hingna Road, Nagpur - 440016, Maharashtra, India Phone: +(91)-7104-232726 Website: http://www.indiamart.com/nssl-ltd/
- 3yr Mono Flanges (Single and Double Block and Bleed Valves)
Ever Green Steel, Mumbai
Needle Type Globe Valves
One Piece Ultra Slimline Forged Body combines a compact design with strength and reduced potential leak paths compared to conventional designs.
Outside Screw and Yoke (OS&Y) Needle Type Globe Valve with yoke and bolted bonnet provide high mechanical strength and long cycle life on primary isolation service.
Flanged Connections available on inlet or inlet and outlet in a choice of sizes and ratings to suit each more...Address: No. 13/21, 3rd Panjarapole Lane, 2nd Floor, C. P. Tank Road , Mumbai - 400 004, Maharashtra, India Phone: +(91)-22-66393946 Website: http://www.indiamart.com/evergreen-steel-mumbai/
- 1yr Bleeder Valve
Tubefit Instrument Controls, Thane
Manufactured from extruded brass. A bleeder valve works by releasing air or gas through valve opening to reduce he built up pressure inside a tank or remove excess air or gas in a system. The main functioning component is the valve itself, which is just a simple opening.
more...Address: 2 & 3, Swamini Industrial Estate Ii, Village - Waliv, Vasai , Thane - 401208, Maharashtra, India Phone: +(91)-250-2453813 Website: http://www.indiamart.com/tubefit-instrument-controls/
- 12yr Instrument Valves /Bleed Valves /BVS SERIES
Astec Valves & Fittings Private Limited, Mumbai
Instrument Valves /Bleed Valves /BVS SERIES more...
Address: 314, Samarth Vaibhav, Andheri Link Road, Lokhandwala Complex, Andheri (West),, Mumbai - 400053, Maharashtra, India Phone: +(91)-22-66923007 Website: http://www.indiamart.com/astec-valves-fittings/
- 5yr Bleed And Purge Valves
Swagelok, Hyderabad, Hyderabad
Swagelok bleed valves can be used on instrumentation devices such as multivalve manifolds or gauge valves to vent signal line pressure to atmosphere before removal of an instrument or to assist in calibration of control devices. Swagelok purge valves are manual bleed, vent, or drain valves. The knurled cap is permanently assembled to the valve body for safety. more...
Address: No. 3/6/422 & 422- A. 3rd Floor, Street No. 3, Main Road, Himayat Nagar, Hyderabad - 500029, Andhra Pradesh, India Phone: +(91)-40-40077652 Website: http://www.indiamart.com/swagelok/
- 3yr Bleeding & Venting Valves
Blupax Engineering & Industrial Private Limited, Hinganghat
Blupax Engineering & Industrial Private Limited Bleeding and Venting Valves seperate air or other gases from a liquid depending on the level of such liquid. Thus bleeding and venting valves contribute to the efficiency and enhance the safety of the plant. This emphasises the importance and necessity of a professional design for such valves to enhance the safety of your plant.
Our bleeding and Venting Valves for continuous operation or start up as well as combined devices are more...Address: P. O. Box No. 13 , Hinganghat - 442 301, Maharashtra, India Phone: +(91)-7153-248351 Website: http://www.indiamart.com/blupax-engineering-pvtltd/
- 4yr APU Bleed Valve
UK Engineering Industries, Panchkula
Part No.: 8MT-9130-00
We are also offering APU Bleed Valves to our esteemed clients. These APU Bleed Valves are designed as per the various standards of international industries to offer excellent products. Our products are fitted with sturdy designed handles to offer very easy grip. APU Bleed Valves are manufactured from premium quality raw materials which offer high resistance from rust, corrosion and friction.
more...Address: Plot No. 463, Industrial Area, Phase-1 , Panchkula - 134 113, Haryana, India Phone: +(91)-172-2585499 Website: http://www.indiamart.com/ukengg-industries/
- 4yr Double Block Bleed Valves
Powertech Valves, India, Mumbai
Forged modular Double Block & Bleed Valves are weight, space & cost saving over traditional hook –ups, combining piping & instrument valves in one compact design. Paramount for pressure instruments take-off points, sampling systems, drains for tanks & pipes where space is restricted, hydraulic power unit systems. more...
Address: No. 109, Vivek Industrial Estate, 1st Floor, Walbhat Road, Goregaon East , Mumbai - 400063, Maharashtra, India Phone: +(91)-22-26851489 Website: http://www.indiamart.com/powertechvalves/
- 3yr Square Block & Bleed Valves
Industrial Valves, Mumbai
* Body : Solid One Piece
* Size : 1/4", 3/8", 1/2", 3/4", 1"
* Stem : Rolled Stem Threads for Enhanced Cycle Life
* Gland : Adjustable
* End Connections : NPT / BSPP / BSPT / METRIC
* Testing : 100% tested to ensure leak tightness at shell, seat & gland.
* Cleaning : All Components are ultrasonically cleaned.
* Material : Different grades of materials like SS 304 / SS 316 / SS 316 L - Nace / Hastalloy C / more...Address: 215/216, Vijay Industrial Estate, Link Road, Chincholi Bunder, Malad (W) , Mumbai - 400 064, Maharashtra, India Phone: +(91)-22-28757831 Website: http://www.indiamart.com/industrialvalves-mumbai/
- 5yr Double Block & Bleed Gauge Valves
Technoflow India, Pune
We manufacture and supply Double Block & Bleed Gauge Valves that are available in the market with 2 Valve Manifold-Remote Mount Flange to Flange. These are specially designed and manufactured for separate mounting and connecting system. Our Double Block & Bleed Gauge Valves also finds extensive application in impulse lines and transmitters. These have simple two valve configuration that helps in easy block, bleed and calibration of a static pressure transmitter or gauge.
Address: Gat No-411, Plot No-38, Urawade, Taluka Mulshi , Pune - 412 108, Maharashtra, India Phone: +(91)-20-64708224 Website: http://www.indiamart.com/technoflow/
- 9yr Double Block And Bleed Valve
Fitwel Engineers, Mumbai
We fabricate superior Double Block and Bleed Valve which is precision made to control the movement of fluids and gasses in very extreme conditions and this sturdy valve has passed all tough tests with élan. As the name suggests this is really able to double block the flow with unmatched efficiency. Our team of experts ensures that this precision crafted product should all requirements of the clients without putting him into trouble. This high quality product comes at a very more...
Address: Office No. 1, Badruddin Building, Ground Floor, Opposite Mazgaon Court, Nesbit Road , Mumbai - 400010, Maharashtra, India Phone: +(91)-22-23073034 Website: http://www.indiamart.com/fitwelengineeringworks/
- 4yr Accessories /Air Bleed Valve
Crane-bel International Private Limited, Noida
It is a unique valve ,which lets air pass to the drain and shuts off the oil flow. It is used for pump Priming and to remove the air trapped in the system. more...
Address: No. E-7, Kavi Nagar, Industrial Area , Noida - 201002, Uttar Pradesh, India Phone: +(91)-120-3263281 Website: http://www.indiamart.com/crane-bel-intl-pvtltd/
- 4yr Flange Body Double Block And Bleed Valve
Industrial Valves, Mumbai
Flange Body Double Block and Bleed Valve
Address: No. 215/216, Vijay Industrial Estate, Link Road, Chincholi Bun , Mumbai - 400064, Maharashtra, India Phone: +(91)-22-28757831 Website: http://www.indiamart.com/company/2409606/
- 5yr Double Block & Bleed
NSSL Limited, Nagpur
NSSL double block and bleed valves may be furnished with or without the bleed valve assembly. Double block and bleed modular valves have evolved to replace the process of bolting together individual valves to provide dual isolation. more...
Address: T-45, MIDC, Industrial Area , Nagpur - 440 016, Maharashtra, India Phone: +(91)-710-4232726 Website: http://www.indiamart.com/nssl-limitednagpur/
- 2yr Block And Bleed Valves
Econo Valves Private Limited, Chennai
Block And Bleed Valves
Address: 197 & 176, Sidco Industrial Estate, Ambattur , Chennai - 600098, Tamil Nadu, India Phone: +(91)-44-26451829 Website: http://www.indiamart.com/econo-valves/
- 4yr Bleed Valve
Punj Lloyd Limited, Morena
These Bag bleed Valves are Manufactured of light weight delrin with adjustable orifice. This valve inserts into the tail of a Breathing Bag.
more...Address: Central Workshop Banmore , Morena - 476 444, Madhya Pradesh, India Phone: +(91)-7532-255534 Website: http://www.indiamart.com/punjlloyd/
- 4yr Air Bleed Valves
Sukan Industrial Marketing Private Limited, Vadodara
Maximum flow: 10 litres to 75 litres (ST-1004-5) and over 75 litres (ST-1004-10)
Maximum operating pressure: 250 kgf/cm2.
Cracking pressure: 3.4 kgf/cm2. more...Address: Sukan House, A- 69/70, Shrenik Park Society, B. P. C. Road, Akota , Vadodara - 390020, Gujarat, India Phone: +(91)-265-2354802 Website: http://www.indiamart.com/sukan-industrial-marketing/
- 9yr block & bleed valves
Inventum Engineers, Mumbai
Forged modular Double Block & Bleed Valves are weight, space & cost saving over traditional hook –ups, combining piping & instrument valves in one compact design. Paramount for pressure instruments take-off points, sampling systems, drains for tanks & pipes where space is restricted, hydraulic power unit systems
Address: 3 G/2, Majithia Nagar, S. V. Road, Kandivali West , Mumbai - 400 067, Maharashtra, India Phone: +(91)-22-65729796 Website: http://www.indiamart.com/inventum-engineers/
- 3yr Block And Bleed Valves
Econo Valves Private Limited, Chennai
Block and bleed valves
Address: no. 197 & 176, SIDCO Industrial Estate, Ambattur , Chennai - 600 098, Tamil Nadu, India Phone: +(91)-44-26451829 Website: http://www.indiamart.com/econo-valves-pvtltd/
- 3yr Double Block And Bleed Valves
Hawa Valves India Private Limited, Navi Mumbai
Double Block And Bleed Valves.
Address: R-16 Ttc Industrial Area Thane Belapur Road, Rabale, Navi Mumbai - 400 701, Maharashtra, India Phone: +(91)-22-67760153 Website: http://www.indiamart.com/hawavalves-india/
Related Trade Leads
(Buy)
Free Tenders from India
Searching for a
right Supplier
Let us help you find the right suppliers!
and receive quotes from genuine suppliers!
B2B Newsletter Subscription