Products Directory > Scientific Instruments & Supplies > Laboratory & Lab Equipment >
Biosafety Cabinets
![]()
Products - 11
|
Biosafety Cabinets |
Displaying 1-11 of Total 11 Products Found |
-
Products
- Description
- Supplier Information

There are four types of Class II cabinets:
Type A: Self exhausts approximately 30% air back into the laboratory and re circulates the remainder. Contaminated positive pressure plenums permitted. May be vented, but not considered a B3 version. more...
![]()

Our bio safety cabinet is designed to provide safety for the operator and protect from cross contamination for the samples and primary containment of the bio hazardous materials being used. These bio safety cabinets can be availed in the following specifications:
Bio safety cabinets are available in various types;
more...
![]()

"Bio-cleanair"™ biological safety cabinets (BSCs), enclosed containers and other engineering controls designed to remove or minimize exposures to hazardous biological materials. The biological safety cabinet (BSC) is the principal device used to provide containment of infectious splashes or aerosols generated by many microbiological procedures Types : more...
![]()

Our range of biological safety cabinets comply with the guidelines and specifications of British Standard 5726 for class II biological safety and cabinets. These are used for applications in
· Isolation & identification of plant/human pathogens,
· Work in virology,
· Tissue culture,
· Sterility testing & recombinant DNA research
Our biohazard cabinet offers operator protection from low to moderate risk work environment for the procedure. The cabinet is kept under negative pressure with partial quantity of re-circulated air exhausted through a HEPA filter.
![]()

We offer Biosafety Cabinets. These are offered with the following uses & specifications:
Uses:
more...- Associated Scientific Technologies
![]()

The bio-safety cabinets are available in three models, namely Class I, Class II and Class III. Our range of Class I Biological safety cabinet is used while working with microbiological agents that come in the category of biological safety level 1, 2 and 3. This cabinet provides protection to the operator and the environment from exposure to biohazards. But it is not useful in the prevention of product samples that are handled in the cabinet. The Class II Biological safety cabinet is also used for microbiological agents assigned to biological safety level 1,2 and 3, but it provides protection to the product also along with the operator and environment. It is available in the following specifications: more...
- Aeromech Equipments Private Limited
![]()

The new recirculating range of vertical laminar flow cabinets are available in three different modules.
Class I Biological Safety Cabinet:
The class I biological safety cabinet provides personnel and environmental protection, but no product protection. It is similar in air movement to a chemical fume but usually has a limited fixed work access opening and the exhaust air must be HEPA filtered, to protect the environment. The class I biological safety cabinet is designed for general microbial research with low-and moderate-risk agents. In addition, the work zone, which type is much smaller than a chemical fume hood, is geared to working with biological whose process/ producers dictates the use of moderate amounts of volatile liquids, that are suitable for recirculating cabinets.
Class II Biological Safety Cabinet:
As indicated in the previous section selecting a class II biological safety cabinet must take into consideration a considerable number of factors more...- Kleanzone Systems,Chennai
![]()

Our Laminar Air Flows are conceptualized to provide a work area completely bathed in high effeciency perfect air which is free from any kind of particulate contamination or impurities. These units are suited in all applications requiring protection of biological specimens or products from the possible contamination during the process or test.Our Laminar Air Flow Bench are designed to ensure that the work enclosure have minimum possible vibration levels and noise level is also contained below 55db. more...
- Biocare Technologies
![]()

We Provide UV Cabinet of Model "CRYSTAL 3" for documentation/qualification procedures, with more facilities at a very affordable price compared to imported UV Cabinets. Good results can be estimated either by quenching in short wave or by fluorescence under long wave in proper true UV light. Some of the features include:
Three light sources:
UVShortwave254nm
UV Long wave 366nm
Visible Ugh!
Source light are switched "ON" as per priority i, e. most carcinogenic least priority & visible first priority.
Combination of tube lights can be made as per customer's choice
For higher intensities two or three light sources can be made of same type & can be switched "ON" simultaneously.
Adjustable Timer with display.
Timer can be adjusted for viewing or for UV synthesis application up to 999 Hrs.
Timer by-pass facility in same unit.
Same viewing model can be used for the UV synthesis application with more...- Aetron
![]()

We offer precision engineered bio cabinets that are fabricated from stainless steel and GI. Its PU coated construction and Stainless steel lining on inner side makes it corrosion resistant and hard wearing. It is provided with heap filters that are available in Minipleate type. To monitor the differential pressure, it consists of low pressure gauges and has UV & Illumination tubes in working chamber. Blowers, illumination and UV are operated by feather touch control switch and indicator. Differential pressure is monitored through specially designed low-pressure gauges. Working chamber is provided with UV & Illumination tubes. Feather-touch control switch with indicators are provided for the operations of blower / illumination / UV. These are offered in diverse sizes and design specifications. Special features more...
- Airtech Services
![]()

We offer bio safety cabinets with following features:Features more...
- Bio Linx India
![]()
