 |
 |
 |
 |
|
|
 |
|
|
||||||||||||
|
Products Directory > Industrial Supplies > Heating Equipments >
Band Heater
Products - 49
|
Band Heater |
Displaying 1-45 of Total 45 Products Found |
Products
These heaters are made in mica and ceramic insulation and made out of M.S, brass and S.S. sheet. Used in varied heating and cooling applications, the features of our products include:
Mica Band Heaters: Offering them in MW quartz IR heating modules, the resistance wire of these heaters are enclosed in a small diameter quartz tube running parallel to each other and mounted in a special housing. Our IR heating modules half are available in different wattage's from 125 to 650 watt and IR heating modules full are available from 250 to 1000 watt.
Features:
more...
The Mica Band Heaters offered by us are appreciated for their features such as high thermal resistance, durable, energy efficient and excellent thermal conductivity & dielectric strength. These find wide application in blow molding, injection molding, film extruders and all plastic & rubber processing machinery. We also offer customization as per the requirements of our clients.
Applications: more...
We are engaged in offering high quality range of mica band heater that is widely used lo heat the molds .dies, nozzles and especially to heat the cylinders (barrels) on all types of plastics(s) processing machinery. It provides excellent thermal conductivity as heat transfer by "conduction".
Below mentioned are some of its unique features and specifications:
• Best heat Transfer capability
• Faster heating up a cooling down is possible
• Maximum sheath temperature up to 480oC (900oF)
• Maximum Walt density = 25 watts / square inches
Note: In case where high watt densities is required is important that all heaters should be used with appropriate, approved and precise temperature control / sensor device (s). more...
We are committed to offering a wide range of Band Heater. These are manufactured by placing spirally wounded Nichrome 80/20 resistance wire coil in ceramic insulators. Further, the exterior of the insulated wire is covered by high-grade stainless steel sheath. Our range of Band Heaters is used for heating of cylindrical parts at temperature 600° C. With energy saving of upto 30% these heaters can also be available with Air cooled option. These heaters are used for heating purposes in Blow Molding Machine and Injection Molding Machine.
Catering to the demands of industries dealing in heavy duty plants and machinery, we manufacture a quality range of Mica band Heater. These heaters consists of resistance ribbon round wires that are wounded over mica. We offer these heaters that are suitable for a variety of sheath material such as, brass, stainless steel and mild steel. Appreciated for precision functioning, our range of Mica Band more...
Our company offer a wide range of ceramic band heater are perfectly designed to provide high performance heating at very high temperature. The high performance is achieved through the excellent insulation, which give the heater a long heater life.
Further, our range of ceramic band heaters are fully flexible and are available with different terminal styles. These heaters can be described as high temperature electric furnaces, which are capable of very efficient heat transfer by conduction, convention and radiation.
Construction: PHP has engineered an Robust Design to meet the increasing demand for Improved Heating Efficiency, Faster Productivity and at the same time Conserve Energy by Reducing Power Consumption, Based on the principle of radiation, conduction & convection this exclusive design comes with an Additional External HEAT OPTIMIZING Thermal Insulation apart from the Standard built in 4mm thick Insulation.. The heat generated will remain inside the gap between the heater and the Additional insulation (as shown in sketch) which not only helps conserves energy up to 30% and more but also helps minimize heat dissipation & lowers the external sheath temp by 60-70% dramatically improving the working atmosphere. For eg ; If the Inside surface temp is appx 280 o C then the outer Sheath Temp will be appx 95 o C. in comparison to other Ceramic Heater Bands.
Standard Features: more...
We offer a wide range of tubular air heater are perfectly designed to give the user the best satisfaction after usage. Our range of tubular air heater saves time & space , which is its unique feature. The working of these heaters are up to mark and are available at most affordable prices.
The Ceramic Band Heaters offered by us are widely used in blow molding, injection molding, film extruders and all plastic & rubber processing machinery. These are available in premium, economy & power saving options. Further, our heaters are engineered for uniform temperature with max amperage carrying capacity.
Applications: more...
Our range of Mica band heaters are available in various capacities and are best known for their long lasting performance. These band heaters are mostly used for heating of cylindrical parts up to 300 C. Our manufactured Mica band heaters are consisting of resistance ribbon/round wires wound over mica, which helps in proper functioning.
Further, our range of Mica band heaters are available in variety of different sheath, as per the need of occasion.
They are most commonly used in the Plastic Injection Molding and Extrusion Processes machines. It Uses very low watt density. Some of it varieties are:
more...
We supply a wide range of mica ceramic band heaters, which are used for proper contact heating on cylindrical surfaces. These heaters are fabricated using high grade MS, brass and SS sheathing and are suitable for air cooled applications. Available in various capacities, these heaters are also covered with insulated jacket to save energy. Our range of mica ceramic band heaters are also available in customized specifications of the clients. more...
Being resistant to shocks and wearing our nozzle heaters are used in various applications. Some of the nozzle heaters provided by us are: more...
We offer mica band heaters which is used in the most challenging applications like in extrusion processes machine and the plastic injection molding. It is manufactured using advanced machinery which includes coil welding, spot welding, rolling hand press and lathe machines. These heaters use very low watt density and can be personalized according to client requirement.
The diverse variety of the mica band heaters includes:
more...
Band & nozzle heaters are ideal for every type of plastics processing equipment. These heaters are manufactured from high quality mica or micanite sheet and have Nickel Chrome resistance. It is covered by metal sheathing & can be rolled to the required shape. The use of mica is cost effective, allows the weight of the heater to be kept to a minimum and accelerating heat transfer through the sheath of the heater & into & the object requiring heat. Band heaters operate efficiently when the sheath temperatures are kept below 250 degree centigrade. If this temperature is maintained, the life of the band heaters gets long. Its applications are: more...
Widely used in plastic injection moulding machine, extruders moulding and blowing moulding. Our ceramic band heaters are made from high grade material. This heater has long life and can be used with high density watts. We also specialize in making blowers and perforators. To save power up to 25% we manufacture Cerawool heater that has robust construction.
We
offer a wide range of band heaters, which are suitable for usage
involving low to moderate temperatures. These band heaters are offered in a wide
variety of termination and clamping styles. Further, our range of band heaters is
available in thin construction and high quality insulation for
effective heat transfer and excellent dielectric qualities.
Features
:
more...
IH Mica Band Heaters are designed to enable both insulation and removal of the heater , without disturbing or having to previously remove other heaters or fittings .
Construction and Limitations :
Manufactured using a Nickel – chrome resistance wire , wound unto a mica insulated former , the inner heating band is formed into a mild steel outer sheath. A stainless steel outer clamp band is provided with swivel toggles enabling continuos operation to 300°C with maximum recommended wattage to 46.5 Kw / m square. more...
We offer a wide assortment of Mica Band Heater manufactured using optimum quality raw material. The heating wire of band heater is insulated with mica and the outside is made by a heat-resisting metal such as plate of stainless steel, copper, steel pipe. These offer excellent thermal conductivity and are available in variety of sheaths. Further, these can be custom made as per the client’s specifications.
Mica band heater specifications:
more...
Suitable for faster convection of heat, we offer Band Heaters that are made of mica or ceramic insulators with MS or SS outer sheath. Provided with insulation of asbestos or ceriwool, these heaters assures hat loss reduction and find application in: more...
The Mica wound band heaters that we are providing are fabricated giving careful consideration of watt density that is necessary in the design of industrial heating elements. There is much variation in the range of watt density & each electric mica wound band heaters has its own individual watt density properties.
Our ceramic strip heaters are made from highly compact refractory material, which conducts heat from the resistance wire quickly to the sheath. This results in low internal temperatures and long heater life. Precise placement of the Ni-chrome wire provides uniform sheath temperature across the entire length of the heater.
We offer premium quality of mica band heaters for any type of plastic moulding machines. We offer a range of Mica Band Heaters manufactured from nickel chrome resistance ribbon precisely wound on selected Mica or Micanite sheet. After insulation through a metal sheathing, it is rolled to the require shape. Options are available for inside diameter & width of the heater, construction type, wattage & voltage, type of terminal and drawing when special holes and cutouts are required.
Our ceramic band heater is available in three different models including Socket-Type Ceramic Band Heater, Ceramic Capped Pin-Type Band Heater and SS Braided Cable-Type Band Heater. These ceramic band heater consist of helically wound resistance coil, which is made of nickel chrome wire. This coil is passed through holes in specially designed ceramic bricks, in a manner that the coil is evenly stretched and flexible ceramic heating mat gets formed. This mat is covered with insulating fiberglass wool for eliminating heat emission on outer portion of the band.
Moreover, the serrated cylindrical stainless steel housing is used to enclose the heating mat along with insulating wool. This construction makes our ceramic band heaters flexible and easy to install. This type of heater transmits heat by conduction and radiation.
more...
Heatco make Ceramic Band Heaters were developed & still being carried on to meet industrial requirements to withstand high temperature and for long life. They are ideally suited to comply with today's new resins, which calls for ever-increasing process temperature.
Ceramic Band Heaters design consist of a helically wound resistance coil made from 80/20 nickel/chrome wire, evenly stretched and precisely wounded through a specially designed ceramic insulating beads forming a flexible heating mat. The ceramic heating mat along with ceramic fiber insulation is placed on a stainless steel housing made with serrated edges providing maximum flexibility for easy installation. The following technical data are required for manufacturing Ceramic Band Heaters. more...
IH Ceramic heaters are designed for applications where temperatures to 450°C are required, or where watts denity is to 60 Kw / m square are needed. Manufactured using individual ceramic links , allows the heater to be opened out over the barrel , without disturbing or having to previously remove other heaters .A stainless steel outer clamp with swivel toggles provides adequate clamping , and a range of electrical terminations are available.
Our firm offers a wide spectrum of Ceramic Band Heater that is used for variety of purposes. These are suitable electric heaters for a variety of machinery such as plastic extrusion and injection machines, plastic hollow and blowing machines and chemical fibre molding machines. The heater uses ceramic as an insulation material which initiates super thermal efficiency. It has a uniform heating capacity with maximum temperature of 871 deg C.
Features:
more...
We manufacture ceramic band heater which is known for its effective functioning in the electronic and the process industry. These heaters are suitably designed to offer high performance of heating at high temperature.
Our ceramic band heaters give the long life because its supreme performance is achieved through the excellent insulation. It is offered with various terminal styles and is fully flexible. It is known as the high temperature electrical furnaces which is highly able of effective heat transfer by convention, conduction and radiation. Final consignment can also be packed according to client requirement.
It has following features:
more...
We offer high quality mica band heaters which are available in M.S and S.S sheets body. The heaters are equipped with premium quality nickel chrome ribbon and are acknowledged for durability and high performance. Our heaters are highly demanded in various industries as they are available with various power saving options.
Specifications:
more...
We are completely engaged in manufacturing of Ceramic Band Electric Heaters & Industrial Ceramic Band Heaters, which are widely used in plastic injection molding machine, extruders molding and blowing molding. Ceramic band heaters are available in various terminal configurations. These heaters are made from high grade material and can withstand up to 1000*C degree. Ceramic band heaters are also made for heating and cooling application. We make them available in the market at competitive prices.
Band Heaters
Backed by our technical ability, we provide mica band heaters, which are fabricated using nickel chrome resistance ribbon that is wounded on specially selected mica or micanite sheet. Further, it is insulated and covered by metal sheeting and wiled to the desired shape.
Features:
more...
EEWA's Band Heaters are ideal for every type of plastics processing equipment. The main applications of this type of Band Heaters in Extruder, Blown Film Disc, Injection Moulding Machines and other Cylinder type Heating Applications. It manufactures a variety of Band Heaters including Barrel Heaters, Mineral Insulated Band Heaters and Ceramic Band Heaters.
Ceramic Heaters are versatile & widely used throughout the industry. Especially to heat the cylinders (barrels) on all types of plastic(s) processing machinery. Higher watt densities provide higher operating temperatures. Maximum sheath temperature up to 800oC. Maximum watt density = 50 watts/square inches. By the use of higher temperatures, faster shot sequence is possible. Use of special ceramic material steatite with high thermal conductivity Mica Bank Heaters are widely used to heat the molds, dies, nozzles and especially to heat the cylinders (barrels) on all types of plastic(s) processing machinery. The mica heater is most economic & provides excellent dielectric strength, excellent thermal conductivity as heat transfer is by conduction. Due to its best heat transfer capability, faster heating up & cooling down is possible. Maximum sheath temperature up to 480oC (900oF)
As per standard specifications are concerned, the inside diameter of a sheath band heater should be the same size as the outside diameter of the cylinder to be heated. Band heaters use a sleeve, jacket or sheath as a protective outer covering for the heating elements. Choices for sleeve material are aluminum, brass, copper, iron, nickel alloy, steel and stainless steel. Typically, insulation is used to reduce heat loss to the environment.
Empires band ceramic heaters are developed to meet industrial heating requirements for high temperatures which calls for ever-increasing process temperature.. Band ceramic heaters are made of helically wound 80/20 nichrome wire evenly stretched and precisely strung through a specially designed stealite ceramic bricks forming a flexible heating mat. It is then placed in flexible stainless steel housing with cerawool insulation. These heaters are flexible & can be fitted easily.
Advantages:
more...
We offer a wide range of heaters which includes:
Ceramic Band Heaters
Features: more...
We offer a range of Mica Band Heaters manufactured from nickel chrome resistance ribbon precisely wound on selected Mica or Micanite sheet. After insulation through a metal sheathing, it is rolled to the require shape. Options are available for inside diameter & width of the heater, construction type, wattage & voltage, type of terminal and drawing when special holes and cutouts are required. Features: more...
Band Heaters for various industrial applications e.g. Injection Moulding machines & Plastic extruder machines, where plastic material is heated in cylindrical sections. Low mass construction of these heaters provide fast heatup and response to controls. These heaters are of two types : 1. Mica band heaters- made up of mica insulation. 2. Ceramic band heaters - made up of ceramic insulators. Ceramic band heaters have longer life and can accommodate more power, but the mica band heaters are cheaper.
Band and strip heaters are a proven and cost effective heating technology. Generally used in larger surface area applications not requiring the precise heat distribution of a coil heater. Band and Strip heaters are built with three primary construction methods Mica and Ceramic
Our mica Band heaters are made of Nickel Chrome resistance ribbon precisely wound on specially selected Mica or Micanite sheet. It is then insulated by covered by metal sheathing and rolled to the required shape.
We build every technically possible heater as per your requirement
Mica insulation provides excellent dielectric strength while permitting rapid and efficient heat migration through the sheath of the heater and into and the object requiring heat. The use of mica follows the mass of the mass of the heater to be kept to a minimum , thus reducing weight, accelerating heat transfer , and keeping costs to a minimum. Datta mica bands are encased in electro-galvanized steel with stainless steel sheath offered as optional.
We offer a range of ceramic band heaters, which fabricated using helically wound nickel chrome resistance coil. The coil is stretched and stung through steatite ceramic cores, thereby forming a flexible heating mat. Further, it is placed in stainless steel housing with ceramic fiber insulation. These flexible heaters can be installed easily.
Features:
more...
Our range of ceramic band heaters consist ring-shaped heating devices that clamp around the cylindrical elements. Heat transfer from band heaters occurs via the conductive method. Most band heaters clamp around the outer diameter of a cylindrical element and heat the element from the outside. Some products clamp around the inner diameter of a pipe. Typically, our range of band heaters are equipped with ceramic or mineral insulation to reduce heat loss to the environment.
We offer wide range of ceramic band heaters which are procured from reliable vendors. Our technologically advanced ceramic band heaters have ceramic wool insulation which reduces power consumption by 20 to 30%. They are also equipped with nickel chrome resistant wire which ensures long term uninterrupted performance. more...
We manufacture a range of Ceramic Band Heaters available in various specifications. These are constructed from helically wound Nickel Chrome resistance coil precisely stretched and strung through steatite ceramic cores forming a flexible heating mat and placed in flexible stainless steel housing with ceramic fiber insulation. These heaters are easy fit and very flexible. We fabricate all types of heaters custom made to specific requirements. Features more...
We manufacture selective range of vishot band heaters after a thorough analysis of their various functional specifications. Before the undertaking of actual production process, we consider various concerned parameters of our band heaters, which include: more...
Category Matches
Related Trade Leads
|
|
Unlike conventional generators, the low fume engines of the th2900 and
tg2500dc keep your home pollution-free, and far from the irritating
noise an... (Sell) |
|
|
We manufacture Energy Saving Mica Band Heaters.
* Available in Brass, ss & ms galvanized Sheathing with Power Saving Options
*Conserves Energy w... (Sell) |
|
We offering band heaters, mica insulated band heaters, ceramic insulated
band heaters, industrial band heaters, water immersion heaters,
industrial... (Sell) |
|
|
We are manufactures of industrial heaters heating element casted heaters
tubular heaters oil heaters ceramic band heaters air heaters hot runner
ha... (Sell) |
Tender Notifications
B2B Newsletter Subscription
