 |
 |
 |
 |
|
|
 |
|
|
||||||||||||
|
Products Directory > Plant & Machinery > Lubrication Systems and Equipment >
Automatic Lubricators
Products - 10
|
Automatic Lubricators |
Displaying 1-12 of Total 12 Products Found |
Products
We offer automatic lubrication system. These motorised lubrication units are single/three phase electrically operated. These automatic lubrication system units are designed to run intermittently and best suited for single shot lubrication. These units are provided with electric motor, reservoir (3 ltrs. To 100 Itrs.) oil filler, suction strainer, pressure switch, pressure relife valve, bleed valve etc. During on time (normally 5 sec.) of electric motor, pump coupled with the motor discharge oil under pressure, immediately after unit is switched off, oil pressure is brought down to approx. 1 Kg/cm2 with the help of pressure reducing valve. Float switch is incorporated in the reservoir is meant for sensing oil level becomes critical may be used as warning for topping up the resevoir with oil. For mounting this automatic lubrication system unit on machine, four holes are provided on the back side of the unit.
APPLICATION
more...
We offer a range of automatic lubrication systems to our clients, which are used to provide automated and distributed lubrication arrangements for process machinery and industrial plant. These equipments protect the premature failure in mechanical equipments by providing correct and measured lubrication into them. All of these centralized lubrication systems direct precise amounts of grease or oil to bearings or other lubrication points. All equipment is designed to meet the strict quality standards demanded by our customers.
FUNCTIONING:-
HI-TECH Multiline radial lubricator is a device to deliver predetermined amount of oil/grease from different plungers at high pressure to the lubrication point independently. Multiline radial lubricator is a single pumping station having a no. Of pump element assemblies placed radically. These Pump elements are actuated by a cam, which is rotated by a speed reduction drive coupled to an electric motor. The dose of oil/grease can be adjust by the pumping elements.The dose can also be adjusted by an adjusting screw provided in each pump element.A maximum 38 pump elements can be fitted into the housing which is used to lubricate the points independently. The capacity of reservoir can be from 1.5 kg to 100 kg. It is provided with a reflector plate, which continuously stirs the grease during rotation of cam. For filling grease in to reservoir,a port in the housing is provided. The system is meant for continuously running. However, these types of more...
Multi point radial lubricators are used for centralized lubrication of machines like rolling mills, calendering machines, sugar machines, cement machinery's and hydra turbines, stone crushers, forging hammers, etc. This is a compact unit for delivering grease/oil under pressure to given number of different bearing point of a machine. It is ideal for lubricating machinery's, which require regular shots of predetermined quantity of lubricant, forced into each individual bearing under pressure. This lubricator comprises number of individual pump element assemblies, screwed into the housing of lubricator. These pump element assemblies are actuated by an eccentric cam, which is rotated by the help of gearbox driven by electric motor coupled with gearbox. The individual pump elements are independent to each other as far as their discharge is concerned. The discharge from the pump element is adjustable with the adjusting screw provided at the end of the assembly. This lubricator is suitable more...
This Multiline Radial Lubricator provides a compact unit for delivered soft grease or heavy oil under pressure to a given number of different bearing points. It is ideal for lubricating machinery which require regular shots of predetermined quantity of lubricant forced into each individual bearing under pressure.
APPLICATION: Multiline radial lubricator is best suited for machine / plant where lubrication
is required with high pressure continuously / intermittently for individual point. The lubricator are used for machine / plant like rolling mill, sugar plant, cement plant, rubber mixing machine, forging hammer, stone crusher, sponge iron plant etc.
FILLING
OF LUBRICANTS: Grease filling in the reservoir can be done manually as well as with the help of other pump. For pump 1/4" BSP port is provided on reservoir.
INSTRUCTION:
more...
We are offering an extensive range of Single Point Automatic Lubricator System, which is available in 24 LAGD 125 and LAGD 60 models. These are provided with flexible time setting period ranging between 1 and 12 months. Further, the high reliability and dispense rate accuracy ensures fit and forget procedure until predetermined replacement date. Our range is fitted with non-return valve of the oil-filled system 24, which is less sensitive to vibration that minimizes the risk of leakage. Further, we also offer a wide range of accessories related to the system.
Features:
more...
Each pneumatic equipment having moving parts will operate efficiently for longer period if equipment is kept properly lubricated. Ideal and most economical way to lubricate these equipments is to allow the compressed air to carry oil in mist form. This is achieved by using air lubricator in the line.
Salient Features:
more...
We source and supply a wide range of Pneumatic Filters, Regulators and Lubricators (FRLs) that find their usage in different automotive and other applications. Available in various models and series, these products assure longer working life. These specifications in which these products are available are: more...
Our organization offers a wide range of Multi Point Automatic Lubricator System Series, which is suitable for greases from NLGI 000 to NLGI 2 and offers high flexibility in types of lubricants. The transparent reservoir helps in visual monitoring of lubricant level and the progressive divider. This ensures that exactly the same amount of grease reaches each lubrication point.
Features:
more...
We source and supply Q series Filter, Regulator and Lubricator (FRL) that are known for their durable quality. Assuring longer working life and enhancing the performance of the products where they are used, these Q series FRL that we have can be supplied in bulk quantity. Our products are available in following models and specifications: more...
air preparation units size 1/8" to 11/2"
Automatic Lubrication Unit : Single Line Lubricationi System with Oil lubrication pump along with float and pressure switch, Oil fitrer, Piston distributors.
Application : CNC Machine, VMC, Milling machine, press and many mores more...
Category Matches
Related Trade Leads
|
We are offering top roller greasing machine with following
specifications:
- Designed for convenient grassing of Ring frame & Speed frame
- Arbo... (Sell) |
|
|
We are offering to sell lubrication equipment, industrial lubrication
equipment, hi speed spindle lubricating machine, precision lubrication
equipm... (Sell) |
|
We want to purchase all types of lubricating pumps, systems and
accessories. (Buy) |
|
We need used oil evacuation pump, Oil dispensing pump, grease pump etc.
to be fitted on our mobile van used for car servicing. (Buy) |
|
Offering base oils and additives such as industrial lubricants,
industrial greases, automotive engine oils, diesel engine oils,
automobile gear oil... (Sell) |
Tender Notifications
B2B Newsletter Subscription
