Products Directory > Industrial Supplies > Rust & Corrosion Protection Products >
Anti Corrosion Products
Displaying 1-21 Products of Total 33 Products Found
-
Products
- Description
- Supplier Information
Our Corrosion Protection Liquids includes following listed products:
• OKS 2100 Anti-Corrosion Wax Coating: Used for protecting finely machined metal surfaces such as tools, dies, moulds, including plastic injection moulds, spare parts, machines etc. against corrosion during storage and transport, even under industrial atmosphere, tropical climate and marine conditions.
• OKS 2110 Short-Term Corrosion Protection Liquid with Solvent Base for Indoor Applications: They form an excellent corrosion protection for castings, forgings, tools, shafts and other semi-finished and machined parts and components, during temporary storage between machining operations.
• OKS 2140 Long-Term Corrosion Protection Liquid with Solvent Base for Indoor Applications: Used to protect transmissions, hydraulic pistons and cylinders, tools, machines, pipes, equipments etc.
• OKS 2160 Long-Term Corrosion Protection Liquid for Outdoor Applications: Used for protecting dies, more...- Kluber Lubrication India Pvt. Limited
The stoving primers offered by us are used for diverse industrial applications and for the pre-treatment and pre-coating of materials like stainless and mild steel, aluminium etc. These primers are manufactured from non-yellowing and anti-corrosive epoxy amino materials. The stoving primers offered by us possess color retention and quick drying properties. It also possesses high resistance to corrosion and abrasion from water, chemicals, detergents, alkalis and solvents etc. We offer stoving primers in a wide range in accordance with its varied usage.
- Pioneer Coats
CERAMICKOTE is a specially formulated thin film, Spray or Brush applied and air-dried Ceramic Novalac – Phenoxy or Novalac-Vinyl Ester coating System engineered to provide excellent chemical immersion service protection to all metals, fiberglass, reinforced plastics, concrete and plastic substrates.CERAMICKOTE is optimally cross linked to provide superior chemical resistance. The product may be force-cured with heat for enhanced performance for faster production in Cold& Humid environments.CERAMICKOTE is available in many shades as per requirements.
Ideal for use in areas not exposed to direct sunlight but exposed to harsh conditions like high humidity, extreme fluctuations in temperature, steam, hydrocarbon contact, and chemicals contact. Ideally suited for areas where high levels of abrasion and wear resistance are expected. For Immersion service contact us for suitability with details of chemicals, concentration, temperature etc., Ideally suites for Water treatment plants, more...- Industrial Solutions Incorp
BRANOkont corrosion protection paper is a specially coated contact protection paper that will not work at distance. Its corrosion protection properties are only effective when it is in direct contact with the metal surface.
Main application area: Steel and cast iron. BRANOkont is compatible for use with chrome, pure tin and aluminum Protection duration: Up to 3 years depending on the climatic conditions and how tightly sealed (leak-proof) the packaging is.
more...- BRANOpac India Pvt. Ltd.
We proffer the variety of WD-40 products, which are used to remove rust from iron and other metals. Furthermore, our products have excellent quality and we offer this range in most effective cost.
- H.D.Traders
We offer polyurethane primers which have a polyurethane resin base and are anti-corrosive in nature. They provide excellent adhesion and corrosion resistance for ferrous surfaces. These primers provide pre-treatment and form plastic like films on to-be painted surfaces and provide excellent corrosion and abrasion resistance. These primers find diverse applications in various industries as it provides excellent adhesion and hardness properties. These primers can be availed from us in a comprehensive range.
- Pioneer Coats
Some of our Special Products to suit Special Industrial & Civil Engineering Requirements.
EPOXY 999 two component high viscosity Epoxy Systems Specially designed to give thick highly bond strength adhesive system. It is suitable for various substrates such as concrete, metals, ceramic, granite & plastics etc., EPOXY 999 is an efficient and cost effective grouting material. We also provide various additives to this product to alter the mechanical and physical properties.
SATHYABOND SBR SUPPLIED as a Single Component high quality emulsion for adding to cement mortars where greatly improved properties are required. Ideally suited for thin layer patching mortars, Renders, Floor Screeds, Concrete Repair Mortars, Abrasion Resistant Linings, Tile Fixing Mortars and general purpose masonry mortars where high quality is required. SATHYA BOND SBR Contains non-Toxic SBR Emulsion.
MICRO CONCRETE It is a ready to use combination of Micro fibers, Graded more...- Industrial Solutions Incorp
BRANOrol is a mineral-based corrosion protection oil that does not contain solvent, waxes, lanolin, silicones or ash-building inorganic additives. BRANOrol protects in two ways: more...- BRANOpac India Pvt. Ltd.
Vacumetic is suitable for the most demanding of requirements. It was specially designed for metal components and large machines with unusual projections, edges and corners.
Vacumetic is a water-vapour-tight barrier-layer material for the protection of. machines, precision tools, components, plant and electronic control systems against moisture and corrosion during sea transport, polar and tropical transport and for long-term packaging and storage purposes.
Vacumetic is moisture and grease- proof, extremely durable in mechanical processes, flexible, wear-resistant, rot-proof and heat-sealable on its white matt side.
Supply Forms
Rolls, Half-tubes, Flat-bags, 3D Box Liner Bags more...- BRANOpac India Pvt. Ltd.
Two component epoxy Ceramic based or Polyurethane based Floor Coating systems. Highly suitable for Chemical, Biological, Automobile, Pharmaceutical, Textile, Dyeing, Ware Houses & Packing Unit Floors etc..., We also provide Conductive, Semi-conductive & Anti-static flooring for the Electronic and other related industries.
more...- Industrial Solutions Incorp
BRANOral products are liquid preservatives that are available in a number of versions:
BRANOral C10 : is a clear, alcohol based active substance for diluted application in operating fluids or rinsing baths. BRAN Oral C10 creates an extremely thin, hardly noticeable passivating layer on non-ferrous metals. In this way the resistance against discolouring, from the air or in the coil, is substantially improved.
The familiar last decrease in solderability is prevented. Recommended for Copper, Bronze and Brass strip, and also for Pipes, Rails, Wire and Stamped, turned or pressed parts (as bulk goods).
BRANOral U 42.1 K is a suitable anti-corrosion agent for cavity protection where use of BRANOrost papers is unsuitable, e.g. narrow tubes, bends, etc. especially for interplant shipment and CKD shipments in the automotive industry. BRANOfluid Supplies: 5 litre, 20 litre, 210 litre cans.
Supplies : 5 more...- BRANOpac India Pvt. Ltd.
Un-Protected porous substrates absorb moistures and water. The absorbed water slowly dissipated into the surrounding area because of capillary action & permeation. Especially in coastal areas and areas exposed to corrosive chemicals or gases this phenomenon results in increased corrosion of the concrete and steel reinforcements.
Because of the enhanced carbonation and reduced pH levels rapid deterioration of steel takes place. Steel when get corroded, increases its volume by almost double, this phenomenon apart from reducing the structural strength of the building leads to further cracks and fissures in the columns and beams accelerating the deterioration of the structures. If this problem is left unchecked will lead into drastic reduction in the life of the structures and sometimes also lead to fatal accidents.
We provide state of the art technology for the prevention & rehabilitation of structures. Our products include Cleaning formulations, Bonding formulations, Steel more...- Industrial Solutions Incorp
BRANOrost corrosion protection paper (VCI Paper) act in accordance with the VCI principle (Volatile Corrosion Inhibitors) i.e. they release small amounts of Volatile protective substances. A protective atmosphere is built up in packaging containing this paper, providing reliable protection against corrosion for metal components. BRANOrost papers work on contact and from a distance.
more...- BRANOpac India Pvt. Ltd.
Highly effective and largely used in various industrial applications, the maintenance sprays & corrosion preventives manufactured by us assure the clients of better output. Enhancing the performance of various machines, these sprays and preventives offered by us include: more...
- Sri Balaaji Enterprises, Coimbatore
E-ZY is a new premium, e-age multi application product. It is designed for a variety of applications such as:
more...- Eximious Ventures Private Limited
We produce water based and oil based rust preventives which act as temporary prevention of the machinery from rust for a couple of months. Oil based rust preventives are used for long term protection of ferrous and non ferrous machinery components.
- Poly Chem, Pune
Our concrete bonding and repair products are strong and durable. Our wide range of repair and bonding agents,effectively meet the challenges associated with repairing concrete and joining dissimilar materials to concrete.
Perma Bond S B R
Perma Bond SBR is an aqueous emulsion of Styrene Butadiene Copolymer latex, specially formulated for use with cement. SBT modifies the property of cement in mortars and in concrete to make them perform better.In terms of water proofing, repair,corrosion inhibition,bonding, durability and wear resistance.
Perma Crackfill
Perma Crackfill is a specially formulated repair mortar designed to fully meet the requirement of effectively repairing cracks in plasters and in concrete,avoiding the use of costly sealants and putties. Perma Crackfill is a dry powder when mixed with water it forms a creamy consistency mortar which is ready for use in repairing cracks and repairing plasters. Perma Crackfill is reinforced with alkali more...- Perma Construction Aids Pvt. Ltd.
We offer an expertly engineered Therm Clean – XL, which is an effective blend of powerful chemicals. It is oil based mixture and is used for cleaning and decarbonising the entire thermo fluid system
It is a powerful blend of chemicals comprising inhibitor, Deposit Penetrant and state – of – the – art ‘ Maxi – Accelerator TM’. By circulation method entire thermic fluid system can be effectively descaled and decarbonised. This results in improvement of heat transfer of the entire system.- Eximious Ventures Private Limited
Elecstar range of products are designed to solve the problems in the factories & shop floors. Elecstar range not only solves the problems but will not allow the reoccurrence of the same.
Elecstar BTP is one such product which is designed to solve the perennial problem of battery terminal sulphation which occurs in every available battery.
Because of sulphation, the battery or battery bank will not get the full charge or will not give charge as the sulphation forms a non-conducting layers on the surface of a terminal. Secondly it reduces the life of terminals and thereby of the battery.
Eximious designed the solution to this problem in the form of Elecstar BTP, a gel type brushable coating which forms a water tight, monolithic continuous film over the surface which is resistant to acidic fumes and solve the problems of sulphation.
Elecstar BTP should be applied after the assembly to exposed part of cable, cable lugs, nut bolts and terminals fully & completely. It can more...- Eximious Ventures Private Limited
CCS-02 is an unique contact cleaner spray which is absolutely environmentally friendly product, does not contain any chlorinated solvents and alcohols.
CCS-02 penetrates any carbon deposits, it cleans the same effectively. It is basically off line product. The advantage of using Elecstar CCS-02 is it retards the process of carbon generation increasing the uptime of the electrical equipment like electrical contactors, relays, switches, motors, fuses etc.
The salient features & benefits of Elecstar CCS-02 are:
more...- Eximious Ventures Private Limited
What is BOOSTER?
Booster is blend of specialty compounds, deposit Penetrant, Surfactants.
Which boost the efficiency of any hydrocarbon used in cleaning process.
It is designed to clean – decarbonise – degrease the most difficult components
like open gears, bearing, chain drives etc. Any hydrocarbon with booster will
clean hand sticky carbon deposits, thick- viscous oils, sticky gears etc. from any surface. This is a boon to maintenance people in any industry as cleaning is
faster & better.
How to use Booster?
Booster is basically a concentrate which is to be mixed with any hydrocarbon. For example, normally Kerosene or Diesel is used as a solvent for cleaning various components. Addition of Booster reduces the surface tension of any solvent and increase the penetration & cleaning power. It should dosed upto 10% of volume basis in any hydrocarbon.
What is the procedure of cleaning any component?
Basically the process, more...- Eximious Ventures Private Limited
