![]() |
|
||||||||||||
|
|
Products Directory > Electronics & Electrical > Electronic Components & Spares >
Amplifiers
![]()
Products - 95
|
Amplifiers |
Displaying 1-50 of Total 95 Products Found |
Products

Hartley Oscillator ( EL 230)
Colpitt Oscillator ( EL 231)
Wein Bridge Oscillator Using IC 741 ( EL 234)
Relaxation Oscillator Using UJT. ( EL 235)
Hartley & Colpitt Oscillator (EL 232)
Phase Shift Oscillator (EL 233)
Study of Transistor Amplifier- ( EL 236)
FET Common Source Amplifier ( EL 237)
Common Collector (Emitter Follower) Transistor Amplifier ( EL 238)
Common Emitter / RC Coupled Transistor Amplifier ( EL 240)
Common base Transistor Amplifier (EL 239)
Two Stage RC Coupled Amplifier (EL 241)
Biasing of Transistor in Class A Operation (EL 242)
Biasing Techniques of Transistor (EL 243)
![]()

Flame rod sensor we offer is accurate in sensing flame in Gas fired burners using flame detection & rectification technique. The Amplifier fitted provides a voltage for Flame Electrode and the flame electrode is immersed in flame to be sensed. Thus the current is generated by the flow of electrons is detected by the controller for presence of flame. The sensor senses the burning flame and is insensitive to visible light and refractory glows.
![]()

Our range of load cell amplifier is a precision amplifier used for conditioning of the millivolt output from a Load Cell. It can be given as an input to the microprocessor based interface unit. Alternately, the output can also be given to the analog input module of the PLC or DCS system in the form of standard 0 – 10 V DC or 4 – 20 mA DC signal. In addition, the unit has a built in 10 Volts precision reference generator, which is used for excitation of the load cell. These units are extremely stable and accurate for long term measurement applications and can also calibrated to suit the load cell response characteristics so that maximum sensitivity is available in measurement range.
![]()

We provide high power audio amplifiers, which are encountering immense demand in the global markets. These high power audio amplifiers are highly durable and offer the clients superior functionality without causing any type of hassle. We welcome customize orders of our clients and offer these amplifiers as per their demands.
![]()

Our flame rod sensor senses the flame using flame detection rectification technology. These amplifiers provide a voltage for the flame electrode. The flame electrodes are immersed in flame to be sensed. The current, generated by the flow of electrons through the flame, is detected by the controller for presence of flame. These sensors are completely insensitive to visible light and refractory glows. It is excellently suited for sensing flame in gas fired burners.
![]()

The amplifier is used in conjunction with UV Flame Sensor and assists in detection of gas, oil, coal and other types of flames. The Amplifier is a stand alone unit with Two Potential Free relay contact outputs. The outputs are rated at 230 V AC, 5 Amps. The front panel of the amplifier indicates SUPPLY ON and with turn 'on' as soon as the supply is given.
![]()

We offer amplifiers that are suitable for sensing flames in oil fired burners, our range of amplifiers has two potential free relay contacts rated at 230 V AC, 5 Amps.
![]()

Study of Operational amplifier as Square to Triangular & Triangular to Square Wave Convertor.. ( EL 217)
Study of Operational amplifiers as Clipping and Clamping circuit. ( EL 218)
Study of Operational amplifier as V to I & I to V Convertor ( EL 220)
Operational Amplifier as Inverting & Non Inverting (EL 210)
Study of Operational amplifier as Adder, Subtractor, Integrator and Differentiator (EL 211)
Application of Operational amplifiers (EL 212)
Operational Amplifier Kit (Bread Board Model) (EL 213)
Study of Operational amplifiers as Diffirentiator & Integrator. (EL 214)
Study of Operational amplifiers as Schmitt trigger. (EL 215)
Study of Operational amplifier as Sine to Square wave convertor. (EL 216)
Study of Operational amplifier as Voltage Comparator (EL 219)
Study of Instrumentation Amplifier (EL 221)
Study of Logrithemic Amplifier (EL 222)
![]()

Digital servo-amplifiers are used for higher machine performance and helps to improv reliability and repeatability through digital technology and Mitsubishi's own real time auto-tuning. Servo amplifiers which support user needs from DC 24V type to AC 400V type are available with the following features: more...
![]()

a) R.C. Coupled Amplifier :-
(For Frequency Resiponce Curve) Assembled on black front panel with circuit diagram on which all the connections are brought out on terminal for students job, Complete with valve and power supply.
b) Frequency Characteristic of R.C. Coupled Triode Amplifier :-
With V.T.V.M. and Function Generator and R.C. Coupled Amplifier. more...
![]()

We put together a whole range of recording equipment that are crucial for any recording. With high quality performance and accuracy in recording, our full range of recording equipment includes: more...
![]()

We manufacture and supply a wide and qualitative range of portable PA amplifiers by using high graded raw material and sophisticated machines. These can be provided with customized solutions to our clients for their complete satisfaction. The specifications are as follow:
more...
![]()

For addressing people while on the move, Ahuja range covers megaphones, wireless teaching amplifiers, powered speakers for small meetings and waistband megaphones.
![]()

We offer wide range of amplifiers, which can be used for big gatherings to small functions like stage and DJ applications to low and medium powered mobile PA amplifiers for home use. These amplifiers are available in different varieties as follows and can be delivered on bulk amount.
more...
![]()

The dual out put hybrid amplifier has a fully metal body which is made up of high quality keeping with compliance of all the norms.
The technical specifications are :
more...
![]()

Plenty of power supply. 32 pieces of 10000microF for each channel.
State of the art technology multi- stage power supply circuitry are used for PA 3U amps. This method reduces heat and greatly improves efficiency of the amplifier, which leads to an excellent stability and durability.
Multi- protections: PA 3U equipped protection of full short circuit, thermal, RF, On/off muting, DC- fault power supply shutdown and soft start.
A built- in intelligent Clip function. It has a broad range of signal input (0dB 8.5V). Even the CLIP LED lights up a long time in an unexpected situation.
Muti-speed cooling fans installed. It works faster along with the rising of amplifier temperature. This avoids some mechanical noise in quiet environment.
PA 3U can work stably at 2ohm condition for long period. It is a breakthrough in traditional high power amps in the more...
![]()

We offer wide range of PA / siren amplifiers with microphones, which have complete digital functioning. These siren amplifiers are used in defense vehicles and are available in range of 40/60/100W. Some of the specifications of our siren amplifiers include : more...
![]()

We offer, from dual-channel high powered amplifiers for stage and DJ applications, to medium and low powered and mobile PA amplifiers for small gatherings and wide variety of uses.
![]()

Features:
1. Build in 2 way crossovers
no need to buy an external unit
2. Comact up to 2900 watts in 2 rack spaces
save money on racks and flight cases
3. 35Hz Hi Pass filters
save power and help keep your bass tight
4. Twin variable speed fans
when it hots up they'll keep things cool!
Applications
1. PA rental / hire
2. Clubs and bars
3. Stage monitor systems
4. Installations
5. Mobile sound system more...
![]()

We offer our clients with PA Casette Amplifier with Recording (PCR- 650) which are widely appreciated for it high quality and durability. These are being manufactured as per the industrial standards by using highly advanced machines ensuring the quality and durability. The specifications are as follow:
POWER REQUIREMENTS : AC 220-250V 50 to 60 Hz, DC 12V (Car Battery)
R.M.S. POWER OUTPUT : 80 Watts (Max.) at10% THD 65 Watts, at 5% THD 50 Watts
INPUTS : 4 Mies, 1 Aux. & 1 Tape
FREQUENCY RESPONSE : 50 Hz-16000Hz ±3dB
TONE CONTROLS : Bass +10dB, - 12dB at 100Hz
Treble : +8dB,-12dB at 10KHz
OUTPUT TAPS FOR SPEAKER MATCHING : 4-8-16 Ohms. 70-100V line
LINE OUTPUT : 400mV
OUTPUT LEVEL INDICATORS : Led Array
DIMENSIONS (mm) : W336 x D275 x H137
WEIGHT : 10.0 Kg
MASTER PACKING : 2 Pes
![]()

This hybrid amplifier is of full aluminum metal body. We offer these amplifiers of superlative quality and they are very highly efficient also. It gives single output of 550/750/860 MHz.
The technical specifications are :
more...
![]()

Class H amplifier most stable in its class damping factor 800 slew rate 80v/us runs smooth in 2ohms.
![]()

Roland Guitar Amplifiers
![]()

Proportional Amplifier more...
![]()

A superior performance highly reliable DC coupled stereo amplifier, LAB-1500 rated 90 watts per channel RMS. It has been designed for continuous use at high volume and can accept signals from magnetic phono cartridges, tape decks, CD/DVD players and other auxiliary sources including radio tuner. It also has a facility for playing two sets of speaker systems with the help of "A-B" switch.
RMS POWER 90 W per channel at 8 ohms (single channel driven)
110W per channel at 4 ohms (single channel driven)
78W per channel at 8 ohms (both channel driven) THD (at 1 Khz) less than .2% of rated output.
Power Bandwidth 10 Hz-35 Khz (+/_ 3 dB)
Frequency Response 20 Hz- 25 Khz (+/_ 3 dB)
Channel Separation Better than 45 dB more...
![]()

Buffer amplifier of our brand is utilized only when signal isolation is required or in places where higher load driving capacity is required for the model 4-20 mA O/P. Actually this model is used where Analog Output Module PLC/ DCS are unable to deliver this facility. Other than the above mentioned functions buffer amplifiers of our brand are used to transfer voltage from one circuit with high output impedance level to the second circuit with low level input impedance. more...
![]()

Frequency range 550/750/860 MHZ , MAX INPUT 75-80 DB , MAX OUTPUT 104 DB , OPERATING VOLTAGE 220V AC OR 30,40,60, VOLTS AC POWER PASS , AVAILABLE IN ORIGINAL PHILIPS IC NXP 888 AND KOREAN IC . DOUBLE OUTPUT PLUS MONITOR .
![]()

Flame amplifier
![]()

The Erbium Doped Fiber Amplifiers (EDFA) has generated a lot of interest in both optical communication industry and research community because of their inherent ability to directly amplify signals in the optical domain. Optiwave has developed one such optical amplifier based on EDF. These amplifiers are available in different models to suit the customer's specific requirements. The unit is available in three different versions viz., 1U Rack mountable that can be easily fixed in any standard 19" racks, Gain block (MSA) that can be used as a bench-top model and Pump driver provided with only the pump drive electronics. Features The required model can be selected based on customer requirement. The small signal gain can be up to +35 dB. The available output powers are from +10 to +23 dBm. Provision for co-propagating and counter-propagating of pump power. The unit is provided with RS232 interface, LAN interface along with SNMP capabilities. The user can set the required output power or
![]()

BF3R Series High Accuracy Fiber Optic Amplifier more...
![]()

Digital Amplifiers Power Amplifiers (Brand: QSC / Crown / Studio Master
![]()

We are manufacturing qualitative power amplifiers which are available in LNA, low, medium and high power comprising the frequency range 824 - 894 MHz, 890 - 960 MHz, 1710 - 1880 MHz, 1880 - 1930 MHz, 2.4 - 2.5 GHz are available. We are offering three kinds of amplifiers which are as follows:
LNA (Low Noise Amplifier):
These are the low noise amplifiers which are available in frequency from 824 to 2500 Mhz. We are also providing N type, SMA, TNC connector completely on customer's request.
Medium Power Amplifier:
Our medium power amplifiers are provided in the frequency range of 824 to 2500 Mhz. Even for this we are providing N type, SMA, TNC connector completely as requested by the client.
High Power Amplifier:
The last form of amplifier is the one with high power. These kind of amplifiers are also available in a frequency range of 824 to 2500 Mhz. As per the interest shown by the client, we are providing N type, SMA, TNC connector also. more...
![]()

We supply a huge spectrum of sound and music system procured by "Studio Master". Along with that we also deal in different types of sound mixing and amplifying systems. Our product ‘studio master’ is creating a rage in the music industry and is widely used by sound engineers, mixers, DJ’s and other professionals. These are available in diverse attractive and sleek designs and are completely user-friendly. Our studio master comes with amplifier, microphone, speaker, mixer and other accessories.
![]()

We are specialized in supplying superior quality magnetic amplifiers.
![]()

Offering a very wide range of surround sound amplifier. more...
![]()

Offering a precision engineered amplifiers. more...
![]()

Model: PPM Broad Band Amplifier Power: 450 / 550 Mhz. Features: * Corrosion Free Powder Coated Housing * Flat Frequency Response * Gain 40 dB * Main-Cum-Power Pass * Low Circuit Temperature
![]()

We have a wide range of Professional Amplifiers which can be use for DJ system and other sound requirements.
![]()
Offering a precision engineered range of ultra low level signal amplifier. more...
![]()

The Avocent Emerge DA1200P PC/VGA distribution amplifier provides two outputs for use in any application requiring multiple outputs from a single PC or other VGA video source. The video bandwidth in excess of 500 MHz handles computer resolutions up to 2560 x 1600 at distances up to 300 feet from the source without signal deterioration. The DA1200P distribution amplifier provides VESA industry standard DDC (Data Display Channel) bidirectional communications for plug-and-play operation of attached display devices. The small and rugged design is ideal for applications that have space limitations. The DA1200P distribution amplifier is 5VDC powered, and includes a high performance 1m VGA input cable and power adapter. DA1200P Distribution Amplifier Quick Facts more...
![]()

We offer plastic cabinet and other plastic components of amplifiers. Our plastic components ensure safety of the valuable electronic components of an amplifier. These components are manufactured from top quality plastic and are resistant to rugged conditions.
![]()

We are also engaged in the sphere of offering a wide range of ADC DAC Operations Amplifiers that are a DC-coupled high-gain electronic voltage amplifier with differential inputs and, usually, a single output. Due to their high quality, these are being used in a vast array of consumer, industrial, and scientific devices.
Features: more...
![]()

GENERAL PURPOSE AMPLIFIERS (SSB-110)
![]()

Roland Cube-30X Amplifier
![]()

A high performance stereo cassette recorder with built-in discrete type rugged DC coupled power amplifier, capable of delivering 800 watts PMPO across 8 ohms ohms load. Input sockets are available for signals from a compact disc player, external tape deck and microphone. RCA type transfer and for reply through an external amplifier. A 6 band graphic equalizer is a salient feature of this system.
Deck Portion 1. Frequency response (Rec./Play) 30 Hz to 12 KHz +/_2.5 dB
2. Signal to noise ratio 50 dB below 0 dB level
(Play back Amplifier) (Controls Flat)
3. Wow & more...
![]()
Offering a precision engineered range of ultra low level signal amplifier. more...
![]()

The Avocent Emerge DA1200D DVI-D distribution amplifier with HDCP is a compact, high performance product designed to meet the most demanding requirements for the distribution of DVI signals with HDCP copy protection. The DA1200D distribution amplifier provides transparent distribution of a DVI-D signal to two destinations. The unit has DVI-I connectors for the input and outputs for compatibility with all DVI cables. The DA1200D distribution amplifier may be cascaded to deliver DVI with HDCP signals over greater distances from the source using premium grade DVI cable. DDC support offers plug-and-play operation. DA1200D Distribution Amplifier Quick Facts
more...
![]()

Our range of Alto products is precisely made to offer long-term functionality to various end-users. Our durable and qualitative range of audio and sound mixing systems provides exceptional performance and is specifically designed for performing musicians and professional sound engineers. These cost-effective products have amazing sound quality and are available in different stylish designs and modals. Our huge assortment of sound systems includes crossovers, dynamic processors, equalizers, pre-amplifiers, PA system, effects processors, mixers, power amplifiers, loud speakers and many more.
![]()

We are also engaged in the sphere of offering a wide range of ADC DAC Operations Amplifiers that are a DC-coupled high-gain electronic voltage amplifier with differential inputs and, usually, a single output. Due to their high quality, these are being used in a vast array of consumer, industrial, and scientific devices. Features: more...
![]()

FLAME ROD AMPLIFIER
![]()
Category Matches
Related Trade Leads
|
Ref no: 315-41-5901
Module-amplifier-type pq 02-po c 32000/1314102-board no.0772198 supplier herion(g) manufacturer part number 5996552.
Purch... (Buy) |
|
|
We offer to sell amplifiers, audio dj amplifiers, audio power dj
amplifiers and high performance dj amplifiers. (Sell) |
|
Offering to sell amplifier, flame rod amplifier, uv frame amplifiers,
ldr flame amplifiers, electronic amplifier, uv amplifier, flame
amplifier, fl... (Sell) |
|
We offer amplifiers, hybrid amplifiers, output hybrid amplifiers, dual
output amplifiers, electronic hybrid amplifiers, metal hybrid amplifiers
and... (Sell) |
|
We are offering huge range of amplifiers like:
- Hybrid Amplifier
- Output Hybrid Amplifier
- Electronic Hybrid Amplifier
- Dual Output Hybrid... (Sell) |
Tender Notifications
B2B Newsletter Subscription