 |
 |
 |
 |
|
|
 |
|
|
||||||||||||
|
Products Directory > Medical Products > Cleanroom Equipment & Supplies >
Air Shower
Products - 30
|
Air Shower |
Displaying 1-31 of Total 31 Products Found |
Products
Kleanzone air-showers are self contained air chambers installed at the entrance, to clean rooms in order to minimize the amount of particulate contaminants, that are washed off with high velocity HEPA filtered air jets. The high air velocity of 20-22 m/s ensures efficient scrubbing action necessary to remove particulate matter. Contaminated air is then taken in through the base of the unit, filtered, and re-circulated into the chamber. Technical Specifications: more...
"Bio-cleanair"™ air shower entry systems is a walk-through cabinet, which provides clean air at a very high speed and removes the dust particles; lose hair, lint etc from the body of the persons entering in to a important manufacturing or a research areas where such external contaminations may create adverse effect in the critical process.
Technical Specifications :
more...
We designed these Positive Pressure Modules in such a manner so that these can be capable in providing a clean area within a small enclosure or cell. The working principle of these pressure modules is almost same to the Laminar Airflow.
At the rear end of the unit, the pre-filter is fixed. For sucking the air, a bowler assembly is used. After sucking our the air, the air is passed through the HEPA filter chamber. The highest level of air filtrations is taken place inside the HEPA filter. more...
Heavy duty Rigid Construction of MS powder coated or SS 304 sheet with aluminum door full glazing, heavy duty Hinges & electromagnetic interlocking with emergency release switch is basic functions.
HEPA filter with eff. 99.97% down to 0.3 micron eliminate the dust. Emergency release switch prevent accidental access to clean zone area with 10-180 seconds adjustment of door release adjustable timer. Blower generated nozzle velocity 6000 FPM with 30 mm dia. nozzle effective clean the surface of the object. Specially designed Air shower will ensure the barrier between clean room & non sterile contaminated area.
Features:
more...
Made from the best grades of steel, our range of air showers is available at industry leading prices. Our expertise lies in custom manufacturing them to suit the requirements of the customers. These air shower are available in the following features:
more...
We use water proof commercial ply made of teak wood to fabricate sturdy air shower. The external surface is made of laminated sheets and the surface of air plenum is coated with synthetic rubber paint over suitable primer base.
Aluminium or PVC mat flooring is used for plat form. Its sturdy doors are made of 6 mm clear glass and aluminium pipe and are provided with automatic door closures & manual locks. It can retain particles up to 10 to 15 micron and has efficiency of 90% with a pressure drop 6 MM WG.
Specifications : more...
Our range of air showers are widely in demand owing to their high end features such as corrosion resistance, high performance and long working life. Air showers offered by us are covered by aluminium grated sheet or PVC mat flooring and doors are made of 6 mm clear glass in aluminium pipe with automatic door closures & manual locks. It is also equipped with a prefilter made from synthetic polyester non woven fiber, particle retention 10 to 15 micron which has an efficiency of 90% and pressure drop of 6 mm WG. These HEPA filters are made of macro clean, glass fiber paper of imported origin, particle retention 0.5 micron & above, pressure drop-23 mm WG.
Technical Specifications more...
Prior to the entry of a controlled environment, Our manufactured air showers systems are installed and this assists in avoiding contamination through personnel entry. To lift off various types of contaminations including dirt, lint, dust etc, our manufactured air showers employ concentrated airflows. The individual air flow is conducted through a specially manufactured chambers inside these air shower entry system.
Effective scrubbing action is ensured by the high velocity air from jet nozzles, which is essential for removing the particulate matters. Polluted air then flows through the shower's side walls and finally, it passes through pre-filters and HEPA filters for letting off all impurities. more...
The clean air tents are actually Clean Air Work Station. These are suitable for a relatively smaller clean room are we offer these in a ready to assemble configurations. These systems are used in various applications and can be moved from one place to another place.
The two most important areas, where these systems can be used are Packing Sections of a Pharmaceutical Industry & Automatic Filling Stations. In other industries, where these can be used are Machinery Production Industry, Filling Line, Sealing in Pharmaceutical Industry, Packing, Micro-electronics, Space Applications and Food Processing.
Product Characteristics
• To bring versatility in their applications, these are manufactured in various sizes.
• Are availed in Ceiling Suspended types and Self Standing types.
• Can be availed in SS or MS with PU painted constructions
Various constructional and working specifications of the air shower entry system 2 are:
• The entire system is constructed by polished stainless steel. These are also constructed by GI with oven baked PU paint finish.
• We offer these air shower entry systems in different sizes and dimensions.
• These are also available with different entry & exist door directions.
• The the highest purification capacity of these systems in our collection can go up to particle sizes 0.5 micron & above.
• We offer both in automatic as well as partial automatic form.
• Optional grated datum.
• The operational velocity of these system is 20 – 25 M/Sec (+/- 2).
• The time taken for showering is 0 to 120 seconds and as per the requirements, the showering time can be adjusted.
• In all the three direction i.e. right , left & top, the nozzles can be fitted.
• Blower Static Pressure 75 mm WG,
• Supply 415 V, 3 Phase, 50 Hz
We offer a wide range of air shower, which are self contained chambers installed at entrances to clean rooms and other controlled environments. These minimize particulate matter entering or exiting the clean space. Further, our range are highly in demanding applications in the micro-electronics, semiconductors, pharmaceutical, spray painting, lab animal research and food markets.
Application areas :
more...
The air shower is a full-fledged assembled system that is specially designed to provide moving air in the form of spray and at a speed of 20-25m/s. The air comes out of adjustable nozzles that are fixed in the ceilings and opposing walls. The contaminated air passes through base and after filtering, it is re-circulated into the chamber. In side the walls of the unit, the duct air chases are installed.
The illumination power of the unit is measured in 100 foot candles. Both the doors of the system is locked automatically during the operation and in case of emergency or power failure they can also be opened manually.
Available Material of Construction:
more...
The Air Shower equipment available with us is a self-contained Clean Room entry enclosure that minimizes the entry of particulate contaminants carried by the personnel entering the Clean Room. These are better than cleanliness class 100 and are also available in customized form.
Operation:
• The Shower cabinet is equipped with high static blowers that discharge air at high velocity in the order of 3000 feet per minute through nozzles located on the ceiling and walls
• HEPA filtered ultraclean air strikes the person(s) from all directions and dislodges lint/dirt that hang loosely from the garment or exposed body parts
• A solid state electronic circuit renders the operation fully automatic & controls the sequential operation of the Electromagnetic door interlock arrangement
• This ensures entry of personnel only after the air shower
Applications :
• Semiconductor mfg Micro-electronics
• Aerospace
• Optics and more...
Air shower is used to remove the contaminating agents from the staff's clothes when they come in controlled contamination environments where harmful powders are treated and they do not have to be diffused in the external environment. Operating principle of air shower is based on the mechanical action exercised on the particles settled on the staff's clothes by “air blast” blown out at high speed by adjustable diffusers nozzles and uniformly distributed on the internal walls of the “shower”. The air is conveniently pushed by a dimensioned centrifugal fan in terms of the volumetry of the shower and filtered in absolute filters at high capacity (H14). The cleanness effect obtained varies in terms of time of exposure of the staff to the air blastsGlass doors of all height provided with spring device to automatically close a door. Opening direction as per client's specifications. Adjustable blowing out nozzles stream management of the staff fulfilled with locking more...
We manufacture air showers, which are self contained air chambers, installed at the entrance to clean rooms. These helps to minimize the amount of particulate contaminants. The construction features of our range are: more...
A perpetual feed of wet particulate material is dried in direct heat rotary dryers in the presence of hot air, while the particulate material transports along the interior of a rotary cylinder. The rotating shell acts as the conveying stirrer and device. Our rotary vacuum dryers are suitable for co-current (parallel) & counter-current operation. In the co-current operation, the wet materials are exposed to the hottest air. This is done to successfully make them heat sensitive or to dry-up the sticky materials. In the counter-current operations, to remove the moisture from the sticky materials, these materials are exposed in the hottest air.
This is a factory assembled system, designed to offer a spray of moving air at just about 25-25m/s, from modifiable nozzles in the sealing and opposite walls. Impure air is passed through the base of the unit, filtered and re-circulated in to the chamber. Duct air chases are installed inside the walls of the unit. While the system is in process, both doors will be mechanically locked. These can be constructed in the following material: more...
We offer a quality range of Air Showers that are designed using high grade material and components that are sourced from reliable and certified vendors. These are self-contained air chambers that can be installed at the entrance of an interior for filtering the incoming air. The filtration process minimizes the amount of particulate contaminants like lint, air and dust in the air. Our range of Air Showers is used in following areas: more...
We are engaged in offering clients a wide range of Air Shower, which is basically a self contained factory assembled system in S.S. 304 construction. It is manufactured to deliver a spray of moving air at approximately 6000 ft. per minute, from adjustable nozzles in the ceiling and opposing walls. Air showers offered by us are equipped with stainless steel grated floor located approximately 6" above datum level. Moreover, these also have a specially designed solid state chronological control system, rendering the operation fully automatic, hence assuring complete solutions. more...
DYNA Air Showers act as a barrier between two areas of a facility that help in preventing personnel to spread contaminants. These provide protection both upon entering & leaving sensitive/ contaminated areas without need for clothing changes. Applications: more...
We offer air showers that are designed on the basis of external dimensions of the space available where the Air Shower is to be installed. This aids in the deciding the nominal internal floor area of the Air Shower and the number of personnel who can pass through the shower at a time. Further they are also custom designed to suit the appropriate conditions.
The highlighting attributes of our array encompasses the following:
more...
We offer custom build clean room equipments including air tents. Our standard modules are manufactured so that the spares and replacements are readily available. These are available in the following material: more...
Specifications Cleanliness Class 10000 (& Class 100) Velocity 30 Mtr. / Sec. Lighting By Fluorescent tubes - 2 x 20 W Shower timing 0 To 120 Seconds - Adjustable Vibration 200 micron PP Sound Level 70 Db A+./- 5% Blower capacity 1200 CFM Pressure 75 mm WG Powered By 2 HP, 3000 Rpm Motor. Make KIRLOSKER / CROMPTON Power Supply 415 V, 3 Phase
We manufacture a wide range of air showers that is available in mild steel sheets, galvanized sheets, stainless steel sheets and commercial block board with laminates for our customers. Our air showers are available with HEPA filters in order to protect environment of room from unwanted contamination such as lint, dirt, dust etc. These air showers are noiseless as well as vibration less in operation and have 0.3 micron 99.97% efficiency. We completely understand that clean room garments get contaminated due to gowning, un gowning, huge rush in the change room and when the same garment is worn or removed many times. Our flexible air showers restrict this contamination with no dust collection points and provide clean as well as pure environment to clients.
We are one of the principal companies engaged in offering a quality range of Air Shower Entry System for Paint Booth Applications. These systems are used for preventing the harmful and air full of contaminants from entering the interior. Provided with special filters, the system removes even the trace of contaminants at the entry itself. The contaminant could be of any size and type like dust particles, hair or any other minute particulates.
Air Shower provided by the company are self contained air chambers, installed at the entrance to clean rooms, in order to minimize the amount of particulate contaminants. These are washed off with high velocity HEPA filtered air jets. Their high air velocity of 20-22 m/s ensures efficient scrubbing action necessary to remove particulate matter, contaminated air is then taken in through the base of the unit, filtered, and re-circulated into the chamber.
Technical Specification:
• Cleanliness : Class 100.
• Velocity : Approx 5000-6000FPM.
• Lighting : By Fluorescent Tubes.
• Shower Duration : 0-120 sec, adjustable.
• Power Supply : 415V, three phase.
• Sound Level : 70Db A 105%.
• Nozzle : Adjustable – stainless steel.
• Air Change : 1900 air changes per hour. more...
Air Showers
These air showers are designed to clean off people or equipment prior to entering an adjacent space. Air is blown out through nozzles located on the side walls at 20-25m/s. The air blows into the interior space, where it cleans people or equipment. It is then recirculated through prefilters, an internal high pressure blower, and a HEPA filter, where it travels back to the nozzles on the internal sides of the unit. The LS336 air showers are available in a variety of sizes and shapes to meet individual requirements.
We offer our clients a quality range of Air Showers Entry System for Clean Rooms. These are fabricated using quality and high-grade material that ensures their high quality standards and reliability. The system is installed at the entry of the interior for filtering the incoming air and maintaining its flow. Fitted with high-grade components, these systems set the air free from all sorts of toxins and contaminants.
We bring an array of clean rooms that provide fresh and pure indoor by removing bacteria, virus and other contaminated particles present in the air. Our company assures clean rooms with complete control of impure particles and is designed in such a manner that it minimizes the introduction, generation and retention of particles inside the room. These high quality clean rooms are capable of controlling temperature, humidity and pressure as per clients’ requirements.
We offer a variety of air modules that are available in mild steel sheets, galvanized sheets, stainless steel sheets, commercial block board with laminates and many more for our esteemed customers. These air modules are powder coated on both sides and are capable to operate without noise as well as vibration. Our air modules are available in various sizes depending upon clients’ requirements as well as specifications.
Category Matches
Related Trade Leads
|
We required air shower unit suitable to electronic application.
Please send us details. (Buy) |
|
We are offering diverse range of clean room equipment like:
- Air shower or air locks
- Wall and ceiling panel
- Air supply ducts and air ret... (Sell) |
|
We are offering diversified range of clean room equipment like:
- Air Showers
- Laminar Flow Benches
- Pass Boxes
- Clean Rooms
- Clean Room ... (Sell) |
|
Offering high quality air shower at competitive price. (Sell) |
|
Offering wide range of air conditioning equipment, air curtain, air
shower, laminar flow benches, air filters, clean room module, air
cooling, pass... (Sell) |
Tender Notifications
