 |
 |
 |
 |
|
|
 |
|
|
||||||||||||
|
Products Directory > Industrial Supplies > Heating Equipments >
Air Heaters
Products - 69
|
Air Heaters |
Displaying 1-48 of Total 69 Products Found |
Products
We also offer air heaters & air finned
heaters made from galvanized plated, mild steel. These are designed
for horizontal operation and fitted with fins for better and more
uniform heat dissipation into the finned cross section thus resulting
in rapid heat transfer to the air. The finned strip heaters are used
for both forced (mounted in ducts) and natural convection air heating
(mounted at the bottom of cabinet type oven).
Features :
more...
We offer a wide range of Tubular Air Preheaters that is used to recover the heat from the boiler flue gas. These increases the thermal efficiency of the boiler by reducing the useful heat lost in the flue gas. Our range can also be customized as per the requirements of our clients.
Features: more...
The range of fin heaters offered by us come with and without brackets and is precision manufactured from superior grade stainless steel. Further, our process expertise also allow us to deliver these in exact power and configurations as per client’s specific requirements.
Construction
Made out of 8.2 mm chrome Nickle Steel tube supplied with 2 adjustable brackets . Maximum surface temperature 650 degree centigrade
Application:
For Efficient baking and curing of paints , enamel , lacquers, varnish, adheshive, etc. Also used for drying of metals, powders, sand paper, textiles etc. Specially suited to exposed and semiexposed areas ??? more...
We offer a wide range of RHT Indirect Air Heaters are designed to heat recirculating ovens and dryers where the products of combustion must be isolated from the process air stream. They are also excellent for use in industrial space heating systems.
Some of the features include:
• These burners feature an industry-proven burner
• Firing chamber and exhaust tubes assembled as a single unit for easy installation.
• Optimum performance. more...
Our range of tubular/finned air heaters are made out of stainless steel (304 & 321 Grade), and in incaloy pipe for higher temperature application with high grade magnesium oxide insulation powder. These tubular and finned heater also made in finned covers for better transmission of hot air. We ensure that they are the most versatile of all electric heating elements, capable of being formed into virtually any configuration to heat liquids, air, gases and surfaces. Mounted through tank walls using standard pipe couplings, they are available in various sizes, heat capacities and sheath materials for heating oil, water and chemical solutions. more...
We are engaged in offering high quality and durable range of Strip Heater & Air Heaters. These are available in SS sheathed working temp,350"C" U" type long life finned heaters available in various sizes. We also offer elements type heaters & refactory.
Our range of industrial air heaters, portable air heaters is used in various engineering industries such as packaging, textiles, rubber, automotive and many others. These portable air heaters, process air heaters are manufactured as per international quality norms. We offer our range customized as per clients’ specifications.
Some salient features of our air heaters are: more...
COMP employs a range of heating systems depending on the process conditions. The most commonly used are Direct Fired, Indirect Fired and Steam Air Heaters. COMP uses Burners of Monoblock, Air Atomising, and Duct type.
We manufacture Air Heaters which are durable and made with superior quality steel as raw material. We provide a range of air heaters which are widely used in packaging, plastics, textile, automotive, rubber and many other industries.
Features of Air Heaters:
• These products have forced convection, radiant heat, or resistive heating elements to heat air.
• Reliable & premium quality
• Proper watt distribution
• High quality sheath tube
• High M.T.B.F.
• Heaters are 100% inspected more...
We are one of the leading manufacturers of a wide range of Tubular Heaters. These basically consist of a helically wounded Nichrome 80/20 resistance wire coil centered into metal sheath, which is insulated with magnesium oxide. Moreover, we manufacture these heaters in a variety of shapes & sizes that are offered to our clients as per their individual heating specifications and application requirements. We make use of high-grade sheath material such as, incolony, stainless steel, copper and titanium. The usage of the sheet material depends entirely on the working temperature required. Our range of Tubular Heaters is used for heating air, water, oil and similar kind of fluids. more...
We offer wide range of air heaters, used to warm the room. Our range of domestic heaters are ideal for fitting around the home as either primary or secondary source heating in lounges, hallways, bedrooms, conservatories etc. We offer best quality domestic heaters that are known for their performance and the durability it posses. It is available in various model with multi functionalities.
Western oil fired (HSD fired) air heaters from 20,000 K.Cal/hr. To 1,00,000K.Cal/Hr. for space heating and suitable for resort, houses, office complex, bank halls, factories etc. The units are factory built and easy to install only the chimney and electrical connection is to be connected and the unit is ready for operation. They are fitted with imported burners complete with temperature and humidiity control arrangements. We also offer hot water heat convectors/radiators for winter heating from 500 K.Cal/Hr to 5,000 K.Cal/Hr.
We offer an extensive range of tubular finned air-heaters, which are used for high temperature applications in various industries. These heaters are made from premium grade stainless steel and available with finned covers for better transmission of hot air. These tubular finned air-heaters are provided by us in various sizes, heat capacities and sheath materials for heating oil, water and chemical solutions. These heaters are also customized as per the specific needs of the clients. more...
Made as per users requirement of the client . These can easily be mounted on wall or on pipe stands. These Air Headers are available with required number of outlets with equal spacing. more...
We offer clients technically advanced range of air heating systems that include thermic fluid heater with blowers. These are capable of supplying process air heated up to –10 to 500° C at the pressure range upto 150mmwc.
Material Of Construction
Heating coils made of high temperature IBR approved carbon steel boiler tubes with or without hot dip gavalanising, Stainless steel tubes having of S.S 304, M.S, Copper, aluminum, as per customer need & specification.
The Thermic fluid air heater is also supplied with centrifugal fan having capacity from 1500cfm to 100000 cfm. The fan can also be manufactured from Mild Steel, Stailness Steel of different grade as per the customer specification.
Working Principle:
Thermic Fluid pump circulates thermic fluid through heating coil, where it receives heat liberated from combustion Heated oil passes through user equipment, where it gives away heat & returns to the more...
Air Heaters are used in various industries like Plastics, Textiles, Packaging, Food, Sterilising etc. and serving these industries. Some of the heaters provided in this category are: more...
IH Flanged and insert duct heaters have finned tubular sheathed heaters, secured by mounting bushes into a terminal box, where the heaters can be prewired for a specified number of stages if required.
The Flanged type is supplied complete with a robust, rust resistant metal frame and internally insulated with a non combustible material of thermal conductance not greater than 30 Kw / meter square at 100°C , the insert type with a heavy gauge mounting flange .
We recommend for all duct heating a minimum air velocity of 1 m/s and amaximum of 6 m/s . Thermal cutout or manual reset thermostats can be incorporated when specified .
Application :
Forced Air Heating :
Installation for comfort and process air heating
Comfort Heating :
Can be installed in new or old ducts for complete or supplementary heating in central and air-conditioning systems
Process Air Heating :
For complete process air heating more...
We offer comprehensive range of air heaters which are used for pre-heating the large drilled holding bolts or studs. These are extensively used in mining, steel and construction industry. Our air heaters are extensively used in the assembling and servicing of the: more...
Industrial air heaters are used in spray drying units for dairy chemicals and plastic industries. We design and fabricate qualitative air heaters that are used to heat air with forced convection, radiant heat or resistive heating elements. These industrial air heaters provide maximum air temperature, maximum air flow, and have excellent heating capacity. Manufactured from qualitative raw metals, our industrial air heaters also consist of sheaths that surround a resistive heating element. Our air heaters are used in various industries like packaging, automotive, plastics, rubber, textile, electronics and many more. more...
Our comprehensive range of four pass oil fired air heaters are repetitively demanded by our clients based in different parts of the world. The "Aero-Therm" air heater or oil fired air heaters are compact, noiseless and fully automatic and any unskilled person can operate it.
Constructional features:
more...
S M Enterprise manufactures custom built finned air and unfinned air heater, air duct heater, process air heater banks to meet specfic requirements. A wide range of wattage rating, sheath materials, terminal housing & control features are available for all types of requirements. A wide spectrum of air heaters are available in our product fold. These heaters also provide freeze protection and humidity control, along with equipment protection.
Various standard parameters for our air duct heaters include:
more...
Tubular Heater
We offer a range of finned tube air heaters & air coolers that are manufactured by using high grade raw material. These are widely used in chemical, pharmaceutical dryers, textile processing, food dryers, oil extraction plants, dairy, ice-cream plants, power plants, refineries, earth moving, petrochemicals and air compressors. more...
This is basically a heat transfer equipment to heat air before another process. In Badrin Industries, we manufacture and export steam heated air pre-heaters.
Steam is passed inside the finned tubes bunks and air outside the tubes. These types of air-pre-heaters find application in papers mills, sugar mills and in power plants
An air pre heaters or air heater is a general term to describe any device designed to heat air before another process (for example, combustion in a boiler) with the primary objective of increasing the thermal efficiency of the process. They may be used alone or to replace a recuperative heat system or to replace a steam coil.
one of the purpose of the air pre heater is to recover the heat from the boiler flue gas which increases the thermal efficiency of the boiler by reducing the useful heat lost in the flue gas. As a consequence, the flue gases are also sent to the flue gas stack (or chimney) at a lower temperature, allowing simplified more...
Air Heaters are the most versatile of all electric heating elements, capable of being formed into virtually any configuration to heat liquids, air, gases and surfaces. Immersion Heaters are mounted through tank walls using standard pipe couplings and are available in various sizes, heat capacities and sheath materials for heating oil, water and chemical solutions
With our in-depth domain knowledge, we are manufacturing a wide range of hot air systems. These hot air systems are available in different specifications and dimensions, which can also be customized as per the application requirement of our customers. Furthermore, our range of hot air systems is offered at industry leading prices. more...
HEATCO make Air Duct Heaters are used for process gas heating, drying ovens, air pre-heating, paint drying and curing, heat treating and more. Various terminal housings and control options available. Air duct heaters are designed for heating low-pressure air or gases. HEATCO make series air duct heaters are constructed with stainless steel tubular elements mounted in a stainless/ MS flange with operating temperatures up to 700° C. These electric process heaters can be designed to fit rectangular ductwork and can be supplied with transition sections when used on circular or smaller ducts. FEATURES Element can be individually replaceable on site without the need of any special tools.
Termination Box if required can be made weatherproof to IP:66 & IP: 67. more...
Condensate Air Heating & Cooling Unit
We
manufacture Air Heaters that are made from highest purity MgO and
imported tubes of superior quality. These product have forced
convection, radiant heat, or resistive heating elements to heat air.
Durable in quality, these heaters assure the clients of better
output. Our range of air heater are widely used in industries like:
more...
Thermic Fluid Heater:
For process heating applications Water liquid Phase Heater can be substituted against steam or electricity. Instead of pressurised hot water or steam is used. Temperatures upto 300C can be obtained with an accuracy of +-1%.
more...
We offering various types of room heaters range start from 300. 00Rs to 700. 00Rs. For further inquiry please contact: 094171-96524(helpline24hrs)
We are engaged in manufacturing & exporting of Finned Air Heater. The provide Finned Type Air Heaters & Stainless Steel Finned Air Heater which are especially designed for the purpose of Natural and Convection Space Heating. You can get this product in diverse sizes & shapes. Our Finned Air Heater provides Freeze Protection, Humidity Control along with Equipment Protection. Hence, it finds multiple implications in various industries.
We manufacture and supply a wide gamut of air pre-heaters that are made using top quality raw material sourced from reliable vendors. Available in various specifications such as open channel air pre-heater, free floating plate pack, fully-welded plate pack and modular configuration and can also be tailor-made if demanded by the client.
Sanjosh manufactures a full range of space heaters for industrial applications. When hazardous atmosphere is present, a certified flameproof/ explosion proof (Zone 1 or Zone 2) Air warmer is supplied.
Tubular and finned Rod Elements are used in various Industrial and Domestic equipments where heating is required.Rod elements are almost invariably used in the heating of air (and other gases) for INCUBATORS, CONVECTION AND FORCED AIR CIRCULATION OVENS, FOOD STORAGE CABINETS, AIR CONDITIONING PLANT Finnned Rods may be used for low temperature air heating and are generally preferred for industrial ovens, air conditioning Plants, Loundary Equipments and Shrink Packaging Machines etc
Air Heaters for various industrial applications e.g. industrial ovens, duct heaters, or any application where air heating is involved. Air Heaters are available in SS and Incoloy tubing. Air heaters with SS tubing provide heating range up to 250 deg. Cent. and Incoloy air heaters can be used for higher temperature applications. Tubular construction of air heaters, makes it rugged & shock proof.
Oil / Gas / Pulverized Coal / Combination Burners, Incinerators, Hot Air Generator, Steam Boiler, Thermopac, Water heating system, Combustion equipments, Pollution control equipments etc.
Heating Elements, Air Heaters & Immersions Heaters Type 3
Used for heating continuous flow of air to required temperature using steam as heating media. Capacities available for varoius air flows 500 CFM to 50000 CFM, temp. 50 Deg.C to 120 Deg.C in normal case. Higher capacities made on request. more...
This is a compact, rigid, noiseless & fully automatic Oil Fired Hot Air Heaters/Furnace and any unskilled person can operate it. The Hot Air Heater/Furnace operates automatically on pre set temperature.
Constructional Features: High Temperature Heater: The main constituents of the oil fired hot air haters are the insulated casing, the combustion chamber fabricated out of stainless steel smoke tube, a flue gas outlet, fuel oil burner and ventilation blower.
Low Temperature Heater: The main constituents of the low temperature heater are the same as above except that the material of construction is carbon steel. The casing fabricated out of heavy gouge steel sheets is double jacketed to provide efficient air insulation.
Oil Burner & Electrical: The fuel oil burner is a horizontal firing, pressure atomizing, forced drought type with direct electric spark ignition. The fuel oil pump with combustion blower is mounted on the more...
A wide spectrum of M type air heaters are available in our product fold. These heaters also provide freeze protection and humidity control, along with equipment protection.
Various standard parameters for our air heaters include: more...
• The heaters are also available with titanium pipe.
• These are made from 304 & 316 grade of stainless steel.
Steelsworth Air Heater is an improved form of the basic concept of hot air generating system. Ambient air enters into the air heater from the side top and being heated from the hot surfaces, it flows into the drying chamber being drawn by the drier's hot air fan. Flue gases are drawn by the Induced Drought Fan through the two veritical rows of tube banks on either sides of the furnace area and casting surfaces to the chimney. In Steelworth Air Heater ambient air passes through triple Passes and flue gas passes through five passes. These multiple passing of ambient air and flue gas in this improved design with compact and planned inner surface provides excess heat in the hot air.
Quality Castings
All cast iron part are made from special heat resistant and superior quality castings so as to ensure their withstanding capacity at high heat and temperature. Use of such graded castings also eliminates rapid detoriation of castings in and around the furnace area and give much more...
• Side Terminals (type CAB)
• Bottom Terminals (type CABB)
• 6 - 100 kW
• 120, 208, 240 and 480 Volt
• 1 or 3 Phase
• Rust-Resisting Iron or Chrome Steel Sheath Elements
• 440°F Max. Outlet Air Temp.
Applications:
• Sole Heat Source
• Booster Heater in Process and Comfort Heating Ducts
• Convert existing Forced Air Dryers and Ovens
• With Blower and Duct, can be used to Fabricate simple Forced Air Drying Unit
Chrome Nickel Steel Sheathed tubular heater, available with adjustable brackets for fitting and heavy-duty brass terminals.
Air heater is our vast range of process equipments that are catering to the diverse requirements of various industrial applications in the cement, dairy, petrochemicals, fertilizer industries, food & beverage and allied industries. Fabricated from high grade mild steel and other metal alloys, these sturdy and anti-corrosive equipments deliver efficient performance in tough conditions. air heatr on our world class engineering techniques and stringent quality measures, we supply hard-wearing process equipments.
Tubular Heaters
Tubular heating elements provide an economical, robust, and versatile heat source. These elements are commonly used surface. Datta industries can provide formed elements “ ready to go” into your existing channel or new design. Plain tubular heaters
are available in straight lengths or bent as per customer’s requirement with threaded stud connection at both ends. Finned tubular heaters have enlarged surface area to help faster dissipation of heat. Due to the fact that these designs are made to order, our engineering staff will require a detailed drawing or CAD disk for design .
Finned Tubular Heaters
Finned Tubular Heaters are normally used in forced circulation heating of low temperature air, other atmospheres and gases. Typical applications include forced convection heating of air, process atmospheres, and oven atmospheres
in duct environments. Steel finned tubular heaters are standard with surface temperatures limited to about more...
'U' shaped air heaters are made from chrome nickel steel / incoloy – 800 tube and can withstand a max. surface temperature upto 650°C.
Category Matches
Related Trade Leads
|
We are dealing in all kinds of heating elements like air heater, water
heater, oil heater etc. (Sell) |
|
|
Our company has engineered for the proposals for different size of new
air pre heaters with Boiler manufacturers, for varying capacities.
Such pr... (Sell) |
|
|
We are seller of air heating system, solar dryer with below features-:
* 100 - 1000 Kg / per day output solar dryer
* Selectively coated copper... (Sell) |
|
We are offering different types of heaters like:
- 'U' Shaped Air Heaters
- Ceramic Band Heaters
- Silica Heaters
- Cartridge Air Heaters etc.... (Sell) |
|
We are offering superb range of air heaters with the following features:
- Durable in quality
- Made up of quality materials
- Have forced conv... (Sell) |
Tender Notifications
B2B Newsletter Subscription
