Products Directory > Plant & Machinery > Air Conditioning & Heating Equipment >
Air Diffuser
Products - 26
|
Air Diffuser |
Displaying 1-25 of Total 26 Products Found |
-
Products
- Description
- Supplier Information
Our disc type fine bubble is non-corrosive diffuser and can be easily installed at any depth. These are one the most efficient means of transferring oxygen into process water or waste water. These have the following features:
• Cost effective in terms of maintenance
• Low pressure drop across diffuser
• Energy efficient
• Excellent expanded air flow range
• Flexible membrane design for preventing clogging
• Non corrosive
• Non moving parts assures safety
• SOTE 5.0-7.6 Kg O2/KwH as against 1.2-3 Kg O2/Kwh in fixed/floating aerator- Anjaneya International
We present tube type fine bubble which are suitable for water and waste water treatment. Our diffusers are offered at economical prices. These are designed and engineered by quality experts and trained technicians. Following are the features of our product:
• Minimum maintenance
• Energy efficient
• High oxygen transfer efficiency
• Excellent expanded air flow range
• Uniform bubble diameter and pattern
• Low pressure drop across diffuser
• Flexible membrane design for preventing clogging
• Intermittent Operation without water back flow
• SOTE 5.0-7.6 Kg O2/KwH as against 1.2-3 Kg O2/Kwh in fixed/floating aerator
• 50% power saving- Anjaneya International
We present diffuser which is disc type coarse bubble. This is not only cost effective but also easy in installation at any depth. Our non-corrosive diffuser are the most efficient means of transferring oxygen into process water or waste water. Following are the features of our product:
• Cost effective in terms of maintenance
• Low pressure drop across diffuser
• Energy efficient
• Excellent expanded air flow range
• Flexible membrane design for preventing clogging
• Non moving parts assures safety
• Non corrosive
• SOTE 5.0-7.6 Kg O2/KwH as against 1.2-3 Kg O2/Kwh in fixed/floating aerator- Anjaneya International
THE SNAP-CAP "PLUS 5" represents a substantial advancement in the art of diffuser design The major improvement is in the snap-n check diaphragm cap which is now manufactured from a new, specially compounded, space-age EPDM based thermoplastic rubber that provides extended life and improved performance.
The Snap-Cap "Plus 5" Diffuser consists of two simple parts, the support base and a flexible snap-on check diaphragm. During aeration, the diaphragm lifts from the base, allowing the air to exit through the orifices in the diaphragm. When air stops, the diaphragm is instantly seated against the base by the pressure head of liquid, preventing back flow and clogging. The novel edge design of the diffuser locks on the removal diaphragm to avoid blow off during unusual pressure surges. Diffusers available with 3/4" NPT Threads in plastic base and stainless steel base models. Snap-Cap diffusers will handle air flows from 5 m3/hr to 17 m3/hr- Southern Cogen Systems Pvt. Ltd.
Aeration systems in modern activated sludge treatment plants providing nitrification and de nitrification must comply with high performance expectations. The air diffuser is the keystone of every aeration system. Low energy costs, little maintenance, longevity and operation flexibility are the most important requirements. Membrane diffusers are installed in a grid layout mode covering the entire tank floor or as in-line configuration for cross or spiral rotation of the tank contents. Installations is either fixed or lift-out. Membrane material is EPDM (Ethylene / Propylene – rubber compound). Appropriate additions make the membranes highly resistant against wastewater, dissolvent, ozone, heat, weathering, aging and most chemicals Tubular configurationMaterial: Flexible EPDM rubber membrane. Diameter: 63mm , Length: 620 mm & 1000mm Fittings shall consists of PVC pipe support, 2Nos. S.S. end Clamps, 2 Nos. End more...
- Vinayaka Rotary Compressors
The perfect compliment for any interior where every smallest detail has been executed with care. Our aluminum air diffusers, matches your quest for perfection, measure for measure. Crafted in extruded aluminium section and available in a range of finishes, it is suitable for all the applications in HVAC industry. more...
- Aarkays Air Equipment Private Limited
We manufacture an assortment of membrane diffusers using high Grade EPDM rubber, Silicon and EPDM with PTFE coated. Our range of diffusers produces fine bubbles and stops it to prevent tearing when air supply is stopped. Our membrane diffuser acts as a fine bubble aerator with similar advantages of a higher oxygen transfer efficiency. It facilitates trouble free operation, easy installation and low maintenance. The membrane diffusers we offer exhibits the following characteristics: more...
- Tecpro Energy Systems
Our Square Diffuser match your quest for perfection, measure for measure. Crafted in extruded aluminium/ stainless steel section and are available in a range of finishes.
more...- Air Flow Private Limited
To evenly distribute the air in the industry workplace, we offer high performance M.S. Double Deflection Grills at the most affordable price range. The distribution of air in any direction as per the requirements, can be possible with the help of these grills. The directions in which the air can be distributed are from left to right & and from top to bottom.
- Suvidha Air Engineers
Jet Diffuser more...
- Dynamic Air Engineering (India) Pvt. Ltd.
The prime material used for manufacturing these diffusers is aluminum and therefore, these are known as Aluminum Diffusers. In Air Condition Plants, these diffusers are mainly used and very effectively, these diffusers remove the humidity inside the plants. Apart from air conditioning the plants, these are also used for removing the humidity & offer good ventilation system inside the plant. Their high effective performance allows the workers to work in good working condition.
- ASHISH AIR CORPORATION
Our square diffuser match your quest for perfection, measure for measure. Crafted in extruded aluminium/ stainless steel section and are available in a range of finishes. • The diffusers are made of mirror-backed, long life acrylic and the edges are beautifully beveled • Available in a variety of widths and sizes • Will definitely enhance your room decor more...
- Mandeep Techno Private Limited
Diffusers suitable for centrifugal and submersible pump can made in stainless steel by lost wax casting and fabrication.
- Creative Engineers
We offer a vast assortment of diffusers in square, round and sir diffusing models. These are fabricated in diverse finishes from high grades of aluminium and stainless steel. This makes them corrosion and abrasion resistant. These can be manufactured in different designs to suit the specific requirements of our clients.
- Vikas Fabricator
The perfect compliment for any interior where every smallest detail has been executed with care. Our aluminum air diffusers, matches your quest for perfection, measure for measure. Crafted in extruded aluminium section and available in a range of finishes, it is suitable for all the applications in HVAC industry. more...
- Air Flow Private Limited
Armstrong Board Diffuser more...
- Dynamic Air Engineering (India) Pvt. Ltd.
The prime material used for manufacturing these diffusers is aluminum and therefore, these are known as Aluminum Diffusers. In Air Condition Plants, these diffusers are mainly used and very effectively, these diffusers remove the humidity inside the plants. Apart from air conditioning the plants, these are also used for removing the humidity & offer good ventilation system inside the plant. Their high effective performance allows the workers to work in good working condition.
- Suvidha Air Engineers
SSI manufacture AFD270 (9") and AFD35D [12"] disc diffusers with compression molded EPDM membranes. These are made with less than 10% extractable oils in the final product. Other companies may claim low extractable oil content, however SSI measures it in the final product where it tends to be higher, rather than in the base compound. Extractable oil content is important because it is a determining factor in membrane shrinkage. The less extractable oil we use to make our membranes, the less they will shrink.
Disc membranes have Die-T test results as per ASTM D624-91 of over 110 pounds/linear inch. This is double that of some competitors. Die-T measures tear propagation, which is the amount required to continue a tear. Since we perforate our diffusers with knives, Die-T is an effective means of determining the force required to tear one of our slits. Our impressive Die-T test results allow us to use more perforations in our membranes than any of our competitors. A higher density of more...- Southern Cogen Systems Pvt. Ltd.
The compact and high durable aluminum, extruded dampers of our assortments have the following specifications:
more...- Suvidha Air Engineers
The perfect compliment for any interior where every smallest detail has been executed with care. Why should you settle for anything less. MAPRO Grilles and diffusers that match your quest for perfection, measure for measure. Crafted in extruded aluminium section and are available in a range of finishes.
Types: more...- Air Flow Private Limited
Diffuser more...
- Dynamic Air Engineering (India) Pvt. Ltd.
Our tubes are designed for maximal strength at minimum positive buoyancy. Although tubes are usually not as efficient as discs, tube diffusers are often the most economical choice of all diffusers, particularly the OD90mm diameter x 1 m because of their relatively large size & high air capacity compared to disc diffusers. They require fewer header pipes, less support stands and less installation time than disc diffusers. The tube membranes are extruded from low extractable oil content EPDM polyurethane, silicone or nitrile. Perforations are available in 1 mm or 2 mm slit lengths and both saddles and nipples are designed to mount to US or Metric dimension pipes.
Membrane Life Time
Up to 10 years in municipal waste water treatment plants, depending on waste water influent and operation condition.
Storage
Scogen recommends care in handling and storage to prevent tearing, puncturing or fouling of the rubber membranes. If units are to be stored before more...- Southern Cogen Systems Pvt. Ltd.
Swirl Diffuser more...
- Dynamic Air Engineering (India) Pvt. Ltd.
Airflex Wide Band diffusers are available in PVC plastic. They feature a clog-free design, with oxygen transfer rates of 0.5 to 0.8% per foot of submergence. They have a reliable alpha value and are designed to economically cover the tank floor. The design of the Airflex Band is longer than the typical Stainless Wide Band in the market, for good reason. It offers better floor coverage at a more economical price.
Air supply is provided by PVC or stainless steel pipes The headers serve as control for the Airflex Wide Band diffuser, removing the need for separate control, which is typical of other types of Wide Band diffusers.
The bubbles produced by this diffuser are considered medium or coarse. This diffuser is most often applied for low oxygen requirement, biological treatment, and for mixing in aerobic digesters, channels, equalization tanks, grit chambers. Diffusers available with maximum length of 800 mm long in ¾'' NPT end connection. Wide band diffusers will handle more...- Southern Cogen Systems Pvt. Ltd.
Slot Diffuser more...
- Dynamic Air Engineering (India) Pvt. Ltd.
