Products Directory > Electronics & Electrical > Electric Fans & Coolers >
Air Blowers
Products - 99
|
Air Blowers |
Displaying 1-50 of Total 99 Products Found |
-
Products
- Description
- Supplier Information
We offer to our clients industrial fans that come with an air capacity of 2000 -108000 m3/ hr and features single fan that allows variable discharge orientations. Their efficient performance makes them improve the efficiency levels of oil & gas charged boilers and are also used for firing in boilers.
Their hard face blades further helps in the pullout of air with dust particles and enhances secondary air-flow through chimneys.
Features
• Easy maintainability.
• Low power consumption.
• Low noise.
• High efficiency.
The range of industrial fans offered by us includes:
• Centrifugal Air Handling Fans:
• Single and Double Width.
• Size to 73" wheel diameter & CFMs to 350,000.
• Axial Fans:
• Direct and Belt Drive.
• Sizes to 84" Wheel Diameter & CFMs to 300,000.
• Single Stage Pressure Blowers:
• CFMs to 90" WG, Pressures to 90" WG.
• Material Handling Fans:
• Sizes up to 85"- United Air Tech
With the help of our high end manufacturing unit, we are offering a wide range of direct motor drive blowers. These are manufactured using mild steel sheets and plates reinforced with angle iron frame. Further, our range is available in capacities from 0.5 HP to 20 HP, 3000 Rpm with suitable pressure and CFM are provided as per client's requirement.
Our range of blowers are extensively used in rotary furnaces, cupola furnaces, rolling mills, textile mills, ceramic industry, chemical plants, cement factories, boilers, plastic extrusion plants, hot mix plant and for many other industries.- NBE Motors Pvt. Ltd.
Our wide range of industrial blowers are fabricated as per AMCA 210 standards. In addition to this, we use mild/ stainless steel in our products and are aerodynamically designed in order to provide maximum efficiency to the blower. Further, for the required combination of air quantity and static pressure, we specially design the impeller and rotor. Apart from this, the shaft used in our range have 20% higher speed than the normal operating speed.
- Constorium-Engineering
HUMIDIN is manufacturing Forward Curved Centrifugal Blowers in DIDW as well as SISW designs. As mentioned below: more...
- A. C. Humidification Engineers Private Limited
We manufacture an array of centrifugal fans for diverse industrial applications. Our fans and blowers are customized to meet the requirements of the customers. Our fans and blowers are available in 1,2,3 and 4 constructions. The different types of fans that we present include:
more...- Aerotech Equipments And Projects Private Limited
We offer superior quality blowers and fans to be used in various industries. The blower and fans manufactured by us guarantee complete performance and service back up. We ensure that the products are custom designed as per the requirements of the clients. Our product is available at competitive price to our clients.
Features: more...- Turbodyne Energy Systems
Fixed position, Rotating type, Manually operated. Multi-jet elements suitable for high temperature service. Expanding type nozzles for optimum steam velocity. Used to clean outer surface of pressure parts. Retractable type also available.
- The Boiler Components Manufacturing Co
Centrifugal Air Blowers more...
- National Furnaces
We design and develop heavy duty draft fans for boiler application & air pollution control. These fans are given extra rugged construction for continuous heavy duty in central power stations and industrial plants. Aero dynamically airfoil shaped blades handle more air with less power and almost 40% less noise. The mechanical efficiency of these fans reaches up to 90% and sizes from 600 mm to 2250 mm impeller diameter with air handling capacities up to 28,000 m3/min and pressure up to 750 mm WG. We can also design impeller to suit temperature up to 400° C.
- Associated Furnaces
We manufacture a large range of various air moving devices, such as, Fans and Blowers. The main difference between fans and blowers is in their flow and pressure characteristics. Fans deliver air in an overall direction that is parallel to the fan blade axis and can be designed to deliver a high flow rate, but tend to work against low pressure. Blowers tend to deliver air in a direction that is perpendicular to the blower axis at a relatively low flow rate, but against high pressure.
Features:
more...- Bright Star Cooler
Centrifugal Blower have a provision of getting connected to Aspirator as well as exhaust pipes in order to carry out suction of dust and for connection to cyclones.
more...- Spectrum Industries
Our range of centrifugal blowers are specially designed for an efficient functioning and are available in a variety of sizes. These centrifugal blowers are comprise of housing, impeller and drive arrangements. The housing consists of a sheet iron with circular inlet and rectangular outlet. The impellers precision balanced for a smooth vibration less operation.Our range of blowers are fabricated in M.S., stainless steel, aluminum etc., depending upon the kind of usage. Apart from the usual material these can also be made from various other coatings like F.R.P, hot dip, galvanising, epoxy etc. more...
- Eagle Plastics
Sincrowell Engineers offers Blowers-centrifugal type which are robust, welded, m.s. sheets & plates reinforced with angle iron frame.
Range
0.5 HP to 20 HP, 3000 Rpm, with suitable pressure & CFM available on request.
Construction
CASING :- Designed to obtain efficient pressure conversion.
IMPELLER :- are fabricated from M.S. sheets & plates, forming in multi-blade type. We maintain clearance between casing & Impeller as to reduce air slippage , increase volumetric efficiency. Impellers are designed as per customer requirement for smooth operations, Impellers are dynamically as well as statically balanced. Also available in aluminum.
Application
• Pneumatic Conveying , Air Pollution
• Control Systems, Exhaust & fume
• Extraction Systems- Sincrowell Engineers
We design and manufacture a wide range of centrifugal blowers that are designed to perfection to offer maximum benefits to the clients. The impellers are balanced statically and dynamically that helps in a long working life of bearing and also in a vibration less performance. Conforming to the IS 4894 standards, these blowers are high performing and are available in a capacity starting from 150 M3/hr to 1.50,000 M3/hr. The pressure range varies between 10 to 1500 mm Wg. We also have fans available with double inlet double width.
- The Globe Electrical Industries
We present standard and customized Two Stage Centrifugal Air Blowers which have high, medium and low pressure range. These are also made to be used in direct, v-belt and coupling driven configuration in a pressures range of 2500 mg WG and 150 horsepower.
Technical Details
Pressure : 44" to 100" WG (110 to 250 mbar)
Volume : : 300 to 4000 CFM (510 to 6790 m3/hr.)
Horsepower : 2 to 75 H.P. (1.5 to 55 kW)
Temperature: : Ambient to 600°C- Ray Enterprises
Competitor Plus blowers include special features usually found only on premium blowers—and at competitive prices. They are generally interchangeable with Roots Universal RAI and many Sutorbilt® California Legend™ models, and compatible with most existing OEM engineering dimensions.
Competitor Plus blowers are rated up to 15 PSIG (1.03 bar g) discharge pressure or 16" Hg (540 mbar g) dry vacuum. Our products find their applications in:
• Carpet Cleaning
• Dairy Milking
• Mosquito Fogging
• Air Sparging
• Wastewater Aeration
• Compost Aeration
• Vacuum Cleaning
• Dust Collection- Harsh Industrial Services
FPZ, Effepizeta Srl, Italia for regenerative principle Lateral Channel Blowers. These are more reliable and energy efficient.
Operation Principle
• The lateral channel blowers have been developed on the theory of the regenerative flow. Due to unique principle of operation and design, there is no contact between rotating and stationary parts.
• No wearing parts
• No lubrication required
• Aluminium alloy construction
• Smooth operation with noticeable reduction in sound emission
• Maintenance free
Main Applications
• Aquaculture: For maintaining dissolved oxygen level
• Chemical plants: For process air
• Electroplating: For oil free air agitation of electrolyte
• Paper plants: Knife edge coating, drying, conveying and vacuum pickup
• Yam Dying: Vacuum of pressure dying of yarns
• Bag filters: For reverse cleaning of filter bags
• Garments: For removal of leftover cloth and more...- Southern Cogen Systems Pvt. Ltd.
Our outstanding range of turbine blower consists of dynamically balanced impeller revolving in a stator cum compression chamber with a fine clearance. Impeller is directly fitted on the motor shaft. These turbine blower are easy to maintain and are free from wear and tear hence no lubrication is required. It is used in various applications like aeration of fluids, pneumatic & vacuum conveying, industrial dust collector, vacuum cleaning, vacuum lifting & drying, air pollution monitoring equipment, etc. Some of the features of our turbine blower are:
• No lubrication is required since there is no friction and hence the air is absolutely oil free
• No maintenance cost
• Extremely compact unit and can be mounted inside the machines
• Silencer ensures low noise
capacity 1/2 HP to 7.5 HP.- Metal Tech Delhi
These blowers play a vital role in manufacturing industries or the units where chemicals are used in processing. These are used in handling corrosive gases, fumes. These blowers are made up of HDPE/ PP and FRP, which are considered ideal for their manufacturing processes.
- Deepak Plastic Fabricators
We offer a wide assortment of Air Blowers that are used to move air in various industrial applications. Its heavy-duty construction and sophisticated design makes it durable and highly efficient. The air blower is used in diverse industries specially cement, construction, processing and others. These can be customized as per the technical specifications provided by our clients. more...
- Sri Jayam Engineering Works
A blower is usually used to used to suck air and is applied wherever heat has to be generated. We manufacture the highest quality of blowers available in the market and is widely used in the forging industry. The blowers manufactured by us are also suitably customized to cater to the specific needs of the client. more...
- Maruti Enterprises, Pune
Combustion Blower more...
- Vintech Aircontrol Engineers & Consultants
We manufacture a range of turbine blowers that are fabricated from superior quality raw materials. These blowers consist of dynamically balanced impeller. These impellers revolves in as stator - cum compression chamber and have very fine clearance between them. These impellers are fitted directly on to the motor. The suction and pressure openings on the outer periphery of the stator helps in reducing impedance to the air flow thereby developing vacuum and pressure. Our blowers do not require any lubrication. Having no friction, these air is absolutely oil free. Compact in size, our blowers come with silencer that ensures low noise.
- Super Plating Machinery Co.
We offer wide range of Industrial Blowers like Ring Blower, Side Channel Blower, Regenerative Blower, Turbine Blower
Specifications
Output Power: 0.2 Kw To 7.5 Kw
Max Flow : 530 M3/Hr (312 Cfm)
Max Pressure : 570 Mbar (228 In H2o)
Max Vacuum : 440mbar (174 In H2o)
Stages : Single/Double Electrical more...- Raico Engineers,Mumbai
We offer blowers for various industries engaged in production processes. These are also used on a large scale in big establishments. Our range of blowers are available in various sizes and capacities. We have standards capacities blowers of capacities up to 30000 m3/hr & above. Our company also offers customization facilities to our esteemed clients as per their requirements.
- Joshi & Jampala Engineering
Fin type ammonia air cooling unit are made of steel pipe with aluminium fins, tightly pressed over the coils. The pipes are spray galvanised/ hot dip galvanized. The casing of the coil is made from G. P sheet. Two propeller type blowers are fitted at front of the unit for air circulation to increase the heat transfer. These units are more efficient, light in weight, have more air cooling capacity and require less space save energy.
- Vishal Cool (india) Private Limited
Blowers are basically a heat converter system.
Available Sizes
These blowers available in size ¼ HP to 50 HP with air handling capacities of 680 M3/Hr to 4750 M3/Hr against systems resistance of 100mm to 1425mm WG static pressure.
Applications
Andrew High Pressure Blowers are ideal for combustion air, Product cooling, pressure booster, blowers, foundry cupolas, cooling / drying ovens, liquid agitation, blowing etc- Andrew Engineering Works
Available as FD / ID / Axial Fans. These are available in following categories.I. Double Stage Extra High Pressure Blowers / FD Fans Such blowers are designed in double stage/multi empeller enabling to produce extra high pressure upto 1500 WG pressure but having low volume i.e. 300 CFM. to 2000 CFM, are applicable for oil fired burners to create proper atomization and complete combustion of oil, forced air cooling, pneumatic conveying and liquid agitation. Made out of MS fabricated, direct drive, power consumption 10 HP to 100 HP. II. Single Stage High Pressure Blowers / FD Fans High pressure force draft fan having pressure up to 1100 mm WG and volume Capacity 200 CFM to 1000 CFM are applicable for oil fired Burners to make proper atomization and complete combustion of oil, other fuel firing, forced air cooling and into the forced conveying systems. Construction generally made out of MS fabricated, direct drive more...
- Chauhan Group Of Industries & Trade.
We offer centrifugal blowers, which are made of stainless steel and aluminum. These are available in various coatings such as F.R.P., hot dip galvanizing, epoxy etc. Some of the applications of our products are:
• Cooling AC/DC drives
• Air balloons as an advertising media
• HVAC applications- S S Sheet Metal
Our Centrifugal Blowers are available in single inlet single width design with backward curve, forward curve, straight radial impeller for low, medium and high pressure applications. The blowers are fabricated in M.S., S.S, Aluminium, etc., depending on the kind of application with circular inlet and rectangular outlet.The impellers are precision balanced for smooth vibration less operation. It is available in following specifications:
• Rotor Diameter: 200mm to 2000mm
• Air Volume: 100CMH to 200,000CMH up to 1800mmWG static pressure
Our limit load blowers that are available in single inlet single width and double inlet double width design. The limit load blowers also have double current backward tip bladed impellers that are used in low pressure applications. Our range of limit load blowers can be availed in the following specifications:
• Rotor Diameter: 450 mm to 2050 mm
• Air Volume: 3000 CMH to 250,000 CMH up to 100 mm WG more...- Green Planet Technologies
We are offering top quality range of technically advanced industrial blowers that are used for effective air controlling. Providing effective and economical solution, these blowers are suitable for low, medium & high pressure operation. Please mention Capacity of Blower in CFM and pressure. Also mentioned temperature and other technical details.
- Industrial Thermal Engineers
Made using superior quality stainless steel and mild steel, these Centrifugal Air Blower are used for diversified applications in various industries. They are carefully designed, keeping in mind the international quality standards. Some of the features of our products are: more...
- Ricon Engineers
The fan coil units are manufactured in horizontal (ceiling suspended) and vertical (floor mounted). Cooling/ heating coil are made out of best quality copper tubes and aluminum fins. The centrifugal blowers are low noise producing and use single phase motors. Drain pans are properly sloped and duly insulated. Available in 1.0TR, 1.5TR, 2.0TR, 3.00TR capacities. However higher capacities can also be supplied. more...
- Aarkays Air Equipment Private Limited
Centrifugal blowers are often made of fabricated sheets of stainless or mild steel. They draw air through the inlet housing and release it at 90 degrees with the assistance of its impeller, from its outlet. Our centrifugal blowers have high efficiency, easy installation and low maintenance. We manufacture a wide range of centrifugal blowers to cater to a large number of industrial applications. Some of the types of centrifugal blowers that we manufacture are: more...
- Concept Air Cooling & Ventilation Private Limited
Types Available:
• Single Skin / Double Skin
• Horizontal / vertical
• Ceiling suspended / Floor mounted
•Single Blower / Twin Blower
We provide superior quality air handling units having following advantages with forward curved / backward curved, with DIDW blower make - Nickotra, comfrei, kruger for maximum performance.
• Anti-corrosive
• No condensation at corners
• Allows easy maintenance of the inner surface
• Low operation noise
• Access door for easy serviceability of fan and motor
• Range: 1200 CFM to 40,000 CFM- Aadi Heat Exchanger Private Limited
We undertake complete projects for designing, manufacturing and installation of blowers in PP FRP and other corrosion resistant grade. These blowers are mailable in different capacities ranging from 300 CFM to 30,000 CFM. We also provide cost-effective customization of the blowers to meet the speciofic requirements of the clients.Specifications more...
- Plating Engineering
Our company offers a wide range of FRP/GRP Air Blowers, which are known for their best performance and the strength they carry. These air blowers are best suitable for diversified applications. Our range of air blowers are withstand with extreme conditions and uses and support wide requirements.Further, these air blowers are available in both standards & customize basis. more...
- Dakle Industrial Plastics
We are manufacturing Air & Gas blowers of capacity ranging from 500 m3 / hr to 1500m3/hr. Material of construction is SS316 and Titanium. Blower can be used in chemical industry and specifically for wet and dry Chlorine Gas.
- Charam Techno Chemical & Equipments Private Limited
The range of turbine blowers available with us includes dynamically balanced impeller revolving in a stator cum compression chamber with a fine clearance. The product is made from quality aluminum.
Features and Specifications
Easy to maintain
Noise level below 65 db
Turbine blowers free from wear and tear
Totally Oil-Free
Flow rates: 25 m3/hr to 3000 m3/Hr
Pressure range: 60 mbar to 600 mbar
Vacuum range: 50 mbar to -550 mbar
Power/ motor rating: 0.25 HP to 50 HP
Applications
Aeration of fluids in ETPs
Automated poultry plants
Fish farms
Pneumatic & vacuum conveying of powders & granules
Industrial dust collector
Vacuum cleaning
Vacuum lifting & drying
Air pollution monitoring equipment- Furdoonjee Sales And Services
We manufacture centrifugal steel plate air blower, which are designed to give maximum CFM volume & pressure of air with low power consumption. These are applicable to supply air to combustion systems and in low pressure air. Further, our products are equipped with TEFC, squirrel cage, induction motors like NGEF, ABB, Crompton etc. Apart from this, these products have options of direct drive / shaft driven through 'V' belts.
Features of our product
• Rigid construction.
• Statically and dynamically balanced.
• Field adjustable discharge position.
• Capacity range from 3 HP to 60 HP.
• Pressure 6'' w.g. to 44'' w.g.- Technotherm Engineers Private Limited
We are manufacturing premium quality high pressure blowers in various models, sizes and in Twin & Tri-lobe configuration. These blowers are provided with special seals to prevent leakage & to impart mechanical rigidity to the blower for higher loads.
- Swam Pneumatics Private Limited
Our pollution controlling equipment are available at prices that are sure to be competitive and provided within stipulated time frame. By offering equipments of international quality to our customers, we have earned an enviable list of clientele to our credit. Along with our existing range of equipment, our customers can also avail customized equipment from us that are manufactured as per their requirements.
Our pollution control equipments are used in :
1.Fume extraction systems
2.Chemical laboratories
3.Dust extraction system
4.Kitchen exhaust systems in Hotels- Grip Tool Technologies
Direct drive blowers are also high pressure but low volume blowers having 50 mm to 915 mm wg pressure and 500 cfm to 15,000 cfm volume capacity which are used for High Pressure, some times are called Air Booster. Moreover, these are used in allied engineering industries and are also used for forced draft pressure.
MS and stainless steel fabricated blowers are constructed in steel and are used in general and some chemical industries whereas the FRP fabricated body supported with steel structure duly insulated.- Blow Tech Engineers
We design, manufacture & install centrifugal blowers in PP and FRP, PVC & other corrosion resistant grades of FRP materials. The polypropylene moulded or FRP+polypropylene fabricated impellers are characteristically dynamically balanced. Our blowers are also designed and developed in conformation to the client's operational requirements. Specifications of the product are as follows: more...
- Shree Fibre Glass
Special designed textile machinery heat exchanger most effective hot air circulation system and unique nozzle make high efficiency of drying. Circulation fan if of well balanced radial propeller and volume of hot air with quit rotation. Repairs checking & cleaning are easy thanks to big opening doors on both side of chamber and able to be moved up and down nozzle for easy maintenance. more...
- Bharat Engineering Corporation
We supply two types of man coolers i.e. pedestal and tubular types. Both the types are quality tested as per the specified standard code. more...
- AIR CONTROL SYSTEMS
Air testing fans are the fans manufacturerd for bharat heavy electricals limited power sector - southern region. Single inlet ID fan for gas cleaning plant is under manufacturing. This is a high pressure fan with 1900 rpm. The impeller diameter is 1900mm. Arrangement of drive is belt driven. more...
- Precision Engineering Works India
We can easily and efficiently manufacture single inlet, single width (SISW) configuration blowers. Their impellers are dynamically balanced to offer high efficiency & lower noise level. Made using raw materials like PP / FRP, FRP, PVC / FRP, FRB, FRVE and M.S. / FRP all these products cater to the needs of various industries.
Technical Specifications:
Capacity - 100 CFM to 50,000 CFM
Static Pressure - 50 mmwg to 500 mmwg
Motor Capacity - 0.5 HP to 50 HP
Drive Type - Direct / Pulley - V Belt- Unique Fibre Plast Private Limited
The perfect compliment for any interior where every smallest detail has been executed with care. Why should you settle for anything less. MAPRO Grilles and Diffusers that match your quest for perfection, measure for measure. Crafted in extruded aluminium section and are available in a range of finishes.
Types: more...- Air Flow Private Limited
We have for our clients in the entertainment industry, the wind machines that can create the effect of wind blowing through their high speed rotational blades. These machines are low power consuming and do not create any noise. Apt for being used in recreations or for movies or television serials, these wind machines assure higher performance. These wind machines include: more...
- Banu Film Woks Private Limited
