Products Directory > Scientific Instruments & Supplies > Testing Equipment & Machines >
Abrasion Tester
Products - 14
|
Abrasion Tester |
Displaying 1-15 of Total 14 Products Found |
-
Products
- Description
- Supplier Information
We design taber type abrasion testers to determine a plastic's resistance to abrasion. Resistance to abrasion is defined as the ability of a material to withstand mechanical action such as rubbing scrapping, or erosion.
This tester machine is suitable for abrasion-resistant tests on leather, cloth, paints, paper, brick, plywood, glass, natural rubber and others.- Asian Test Equipments
We present Los Angles abrasion testing machine which is used for determining the resistance to wear off small sized coarse aggregates and crushed rock. The machine consists of a hollow cylinder, mounted on a sturdy frame on ball bearings. A detachable shaft which extends throughout the inside length of the drum catches the abrasive charge and does not allow it to fall on the cover. The drum is rotated at a speed of 30-33 rpm by an electric motor through a heavy duty reduction gear. Suitable operation on 415V, 3 phase, 50Hz, AC supply. We supply it with complete accessories like abrasive charge. Another motorized model with speed regulator is also available. more...
- Central Scientific Instruments Company
The los angles abrasion testing machine that we offer is used for determining the resistance to wear of small size coarse aggregates and crushed rock. These consists of a hollow cylinder, mounted on a sturdy frame on ball bearings. Further, a detachable shelf of our range extends throughout the inside length of the drum catches the abrasive charge and does not allow it to fall on the cover.
Industrial applications :
• Calibration labs / test houses
• Cement
• Ceramics
• Chemicals
• Construction
• Defense
• Education
• Irrigation
• Mining
• Power ( Hydro/Thermal)- Testwel Instruments Company
Our Los Angles abrasion testing machines are best suitable for operation on 440 volts, 3 phase, 50 cycles and A.C. Supply. This machine of ours consists of a hallow cylinder mounted horizontally on a strong frame on ball bearings. Along with the machine, a tray is supplied for collection of the material at the end of the test. Some of the essentials regarding the product design are: more...
- Rupson Industries
Determining the aggregate Impact value of coarse aggregate. Consists of a base weighing between 22-30kg with a lower surface of not less than 30cms and support columns to from a rigid frame work around the quick re. lease trigger mechanism to ensure an effective free fall of the hammer during test. The free fall can be adjusted through 380 + 5.0mm. The hammer is provided with a locking arrangement. A metal tup (Hammer) weighing13.5 to 14.0 kg. The lower end in cylindrical shape, 100mm in diameter and 5cm long with a 2mm chamber at the lower edge and case hardened.
Complete with a cylindrical cup, 102mm dia x 50mm depth, One measure 75mm dia x 50mm deep and tamping rod of circular cross section 10mm in diameter and 230mm long rounded at one end. more...- Rajco Scientific And Engineering Products
Being a leading manufacturer, we deliver Martindale Abrasion Tester that helps in meeting the test requirements of our clients. This is used for determining the abrasion resistance of the fabrics.
Features:
• Consists of four testing plates on which the abrading fabric is attached.
• Revolving plate revolves with the help of motor and gear box and
• Come with a number of cycles that helps in measuring the abrasion of the material
• Available in abrasion cum pilling model- Asian Test Equipments
We deliver a wide range of din abrasion tester and rubber abrasion tester that is designed to determine abrasion resistance index of natural and synthetic rubber in accordance with international standards.
Features
• Manufactured in sync with DIN standard
• It is used to check uniformity and comparison of rubber
• Determines abrasion resistance of rubber- Asian Test Equipments
For determination of resistance of aggregates to wear by abrasion.
- Shambhavi Impex
Abrasion Tester is used to determine the abrasion as well as pilling resistance of all kinds of fabrics. It uses Martindale abrasion method with 4 working heads and individual selectable working pressure of 3/9/ 12 kPa. Abrasion tester is provided with digital controls and unique design supplied with specimen cutters foe ease of operation. Accessories: We are manufacturing and supplying all types of accessories for Abrasion & Pilling Assessment. more...
- MAG Solvics Private Limited
We are well known company engaged in manufacturing Martindale Abrasion Cum Pilling Tester. This instrument is used to check the abrasion as well as pilling resistance of the fabric. Standard features includes:
• Maximum number of test specimens that can be tester at a time : Four
• Speed of outer pegs. : 47.5+2rpm
• Ratio of speeds of outer pegs to cener peg : 32.0
• Stroke of Pegs : 60.5
• Face area of specimen holder (diameter) : 6.45 cm (28.65mm)
• Pressure of test specimens : 3,6,9 and 12 Kn/m2
• maximum load (corresponding to pressure of 12KN/m2): 790g
Related Standard:
• IS 12673-1989 : Textile Fabrics-Abrasion Resistance-Methods of Determination
• BS Handbook 11 : Method of Test for Abrasion Resistance of Fabrics.
• BS EN 344 : 1992 : Requirement and test methods for safety, protective and occupational footwear for professional use- Universal Textile Industries
We offer taber rotary abrasion tester, which can be used to test virtually any flat specimen. Its application includes tests of: painted, lacquered, powder coated, and electroplated surfaces; textile fabrics ranging from sheer silks to heavy upholstery and carpeting; and solid materials such as metals, stone and ceramics and others.
Our range of product have the following features: more...- Polytech Instruments
The Martindale Abrasion Tester fabricated by us is perfect for determining of resistance of any fabric to abrasion. This is done by abrading the fabric under particular conditions against a standard abradant. For this both the abrading surfaces are kept parallel to each other during the operation. It provides a regulated abrasion between the fabric surfaces in a constantly changing direction and at low pressure. For abrading the circular specimen of fabric, it is kept in a known pressure under two simple harmonic motions that are right angle to each other. To inspect the fabric’s resistance to abrasion its visual appearance or loss in mass of the specimens is checked out. Construction: The tester consists of a plate that is set into motion by combining two harmonic motions at right angle by three rotations eccentric pegs. It has a specimen and abradant holder to mount and abrade the specimen respectively. The nylon discs supports the plate and its slots more...
- Apex Enterprises, Kandivli, Mumbai
For resistance of aggregate that is caused by wear two hollow cylinders are attached. These cylinders are closed at one end and are provided with tight fitted covers at the other end. The inside diameter of the cylinder is of 20cms and 34cms depth. These cylinders are mounted on a shaft at an angle of 30 degrees with the axis of rotation. The shaft rotates at 30-33 r.p.m through a reduction gear, coupled to a motor.
Suitable for operation on Three phase AC Supply with 440 volts & 50 cycles. The m/c is fitted with a push button and counter starter for easy user interface. Complete with abrasive charge the machine consists of 12 cast iron spheres of steel spares. The spares are steel balls that are hardened & are of approximately 48mm dia meter, each weighing between 390-445 gram.- Kartar Engineering Works Delhi
Our range of Los Angels abrasion testing machine are used for estimation of abrasion value of coarse aggregate. These comprises of the following: more...
- Hydraulic & Engineering Instrument
We provide a huge assortment of abrasion tester that is in compliance with DIN 53516, and ASTM D 5963. This instrument is very useful in determining the resistance of elastomers with respect to the loss of abrasion. This instrument can conduct abrasion tests of material prone to wear and tear during their functioning such as tires, conveyor and drive belts, shoe soles and others. These products are checked as per the DIN 53543 standard. In this test the abrasion is determined regarding the volumetric loss of a cylindrical sample, which is subjected to movement along an abrasion sheet under set pressure, distance and a constant speed. This tester can conduct comparative measurements on plastics, chalk, painted surfaces and other similar material.
- Apex Enterprises, Kandivli, Mumbai
