Products Directory > Industrial Supplies >
VCI Paper, VCI Films, VCI Masterbatches & VCI Bags
![]()
Products - 389
|
|
Displaying 1-20 Unique Products of Total 389 Products Found
-
Products
- Description
- Supplier Information

1. RUST CONVERTEOR is a one stage Chemical Formulation for Surface Preparation and Passivation of Mild Steel, CRCA Sheets, Cast iron and other Ferro Alloys. It is the ideal choice for Surface Preparation where Shot or Sand Blasting cannot be done. RUST CONVERTOR treatment to a great extent can eliminate the need for Laborious and Costly Seven Tank Process and other Phosphating Processes. Manually cleaned surfaces invariably leaves behind a tightly adhering film of rust on the surface, this rust cannot be removed by normal methods. Rust converter treatment is a used friendly easy to apply chemical cleaning and passivation technique incorporating the unique Polyalloy techniques.
2. We provide state of the art formulations for cleaning Thermic Fluid Lines, We also provide special formulations for degreasing, decontaminating and for disinfecting surfaces.
![]()

SVCORR's YP-558 is specially designed biodegradable anticorrosive poly-film for ferrous products, which can be converted in bags, sheets, rolls and covers as per customer specifications.
![]()

Protochem has a wide range of rust preventive oil giving protection for short term as well as long term.
![]()

Our Corrosion Protection Liquids includes following listed products:
OKS 2100 Anti-Corrosion Wax Coating: Used for protecting finely machined metal surfaces such as tools, dies, moulds, including plastic injection moulds, spare parts, machines etc. against corrosion during storage and transport, even under industrial atmosphere, tropical climate and marine conditions.
OKS 2110 Short-Term Corrosion Protection Liquid with Solvent Base for Indoor Applications: They form an excellent corrosion protection for castings, forgings, tools, shafts and other semi-finished and machined parts and components, during temporary storage between machining operations.
OKS 2140 Long-Term Corrosion Protection Liquid with Solvent Base for Indoor Applications: Used to protect transmissions, hydraulic pistons and cylinders, tools, machines, pipes, equipments etc.
OKS 2160 Long-Term Corrosion Protection Liquid for Outdoor Applications: Used for protecting dies, more...
![]()

R- WATERSEAL- Colorless, transparent spray water repellent coating acid resistant - epoxy/PU linings refractory linings.
For uses against acids, corrosion, water, saline atmosphere.
![]()

We proffer the variety of WD-40 products, which are used to remove rust from iron and other metals. Furthermore, our products have excellent quality and we offer this range in most effective cost.
![]()

We are under take lining and coating M.S. RCC tank, flooring, trays using corrosion resistance resins.
![]()

BRANOkont corrosion protection paper is a specially coated contact protection paper that will not work at distance. Its corrosion protection properties are only effective when it is in direct contact with the metal surface.
Main application area: Steel and cast iron. BRANOkont is compatible for use with chrome, pure tin and aluminum Protection duration: Up to 3 years depending on the climatic conditions and how tightly sealed (leak-proof) the packaging is.
more...
![]()

We also specialize in offering different varieties of superior quality PUV wood coatings to our global patrons. These coatings are manufactured by us through quality conscious methods and provide excellent resistance against abrasion and corrosion of wooden surfaces. These coatings are offered by us in the market at industry leading prices.
![]()

Dip coating protects the surface of the metal from being corroded and from the dirt and dust in the environment. This provides a shiny and glossy look to the complete structure.
![]()

Teflon® /Fluoropolymer /ECTFE (Halar)/PTFE/PVDF/FEP/PFA Thick Coating- Blion
BLIONTM-A pinhole free homogeneous thick coating of PVDF (KYNAR), FEP, PFA, ETFE, ECTFE (HALAR). It has the extraordinary chemical resistance on chemical equipments parts. Any articles of intricacy shape can be processed. Thickness from 500 to 1000 microns. Any articles of intricate configurations can be processed.
Properties: more...
![]()

Cathodic Electro coating, the part to be coated is given a negative charge, attracting the positively charged resin particle. The reversing of anodic polarities greatly reduces the amount of ions entering the cured resin film and thus enhances the properties of cathodic electro coated products. Cathodic electrocoating are high performance coatings with excellent corrosion resistance and can withstand the harshness of exterior environment. more...
![]()

Fluoropolymer Lining / Coating have proved their ability to replace Glass Lining, Rubber Lining, Precious Metals like Nickle, Monel, Tantalum, Lead in both performance and installed cost.
Fluoropolymer Coated / Lined equipment, Pipes,fittings & valves for Chemical & Pharmaceutical Industry for handling Highly corrosive, Abrasive, Ultra pure Chemicals and Food products. Spray coating thickness from 30 microns to 1.5 mm. Sheet Lining of PVDF, ECTFE, FEP,MFA,PFA & PTFE. Sheet lining thickness from 1.5 mm to 3 mm.
PP lining is very low cost material and generally preferred in place of Rubber lining for solvent and Oxidants.
PVDF is a hard, tough and impermeable lining suitable for use with bromine, phosgene and other volatile toxic compounds. Its excellent resistance to abrasion makes it the lining of choice for abrasive & chemically aggressive slurries.
ECTFE is resistant to strong acids, organic solvents, chlorine and aqueous caustic. It is not stress cracked by any organic or more...
![]()

We offer a broad range of corrosion resistant coatings that are based on epoxy and poly urethane It is equipped with ultraviolet resistant external structures. It has a two component and100% solid polymer system that is used for creating an outstanding corrosion and chemical resistant, protective coating. This coating can be applied on all types of equipment and structures. Moreover, it can also be offered as per the requirements of our clients.
![]()

We offer anti corrosive coatings, which are excellent corrosion resistant primers. These can be applied for steel structures, steel containment systems and reinforcement bars. Used in tandem with other epoxy or PU coatings, these products come under the brand name of Corecoat. Available in various packaging, in this range we offer:
Epoxy-modified Base & Intermediate Coats
Epoxy-modified Top Coats
![]()

We are doing Powder Coating for Sheet Metal Fabrication with our well equipped infrastructure using powder coating booth, oven and electrostatic Gema Gun.
- Sam Bros Tex Global Ltd
![]()

We offer different types of off line and on line descaling chemicals. These are available at best of the industry priced and can be supplied in short time duration. Some of the features are:
Attacks rust, scale and deposits but not on the base metal
Cleans complex equipment without dismantling
Penetrates and disperses acid soluble deposits- Aquacare Technique
![]()

We present o our clients corrosion resistant lining that is highly resistant to corrosion and has long life. Available at competent rates. Our lining offers durability to the products.
- Sadhana Fibre Glass Industries
![]()

Seccolor Structural Glazing fabricated from roll formed sections made of galvanized Steel colour coated/ powder coated (Base steel as per IS 513 of D quality, galvanized as per IS 277 with Zinc of 120 Gm/Sq.mtr.) with total coated thickness of 0.72mm. The glass holding section made of 304 grade stainless steel of 0.6mm thick. Galvanized steel sections are to be used as stiffeners inside the colour coated steel/ powder coated sections as per the design requirement. Design calculations are made to suit wind pressures as given in IS 875. Primer coat with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with Alkyd backer of 5-7 microns or powder coated with pure polyester powder upto 50-60 microns thick. The section should be of 50x100x0.72mm/ 33x58mmx0.72mm for frame verticals, 33x58mm for frame horizontals section for reinforcement should be of 48x98mm/ 31x56mm, glass holding section should be of 32.5x37mm more...
- Unique Trading Estate
![]()

E-ZY is a new premium, e-age multi application product. It is designed for a variety of applications such as:
more...- Eximious Ventures Private Limited
![]()

