Products Directory > Industrial Supplies >
Lifting Magnet, Permanent Magnets & Other Industrial Magnets
Products - 319
| |
|
Displaying 1-20 Unique Products of Total 319 Products Found
-
Products
- Description
- Supplier Information
We manufacture candle type magnetic conveyors suitable to handle fine ferrous dirt from large coolers. Latest technique is used to manufacture and fabricate these type of magnetic separators. An infinite length of belt carrying magnetic candles are dipped in the dirty coolant tank. It is dipped to an extent such that the coolant enters the core of the tank. The coolant is allowed to flow slowly over the magnetic candles leaving the ferrous dirt on its surface. The belt is then programmed to pull out the dirt laden candles and rotate them at the top to remove the dirt which is then transported to a bin outside the tank. This type of Separator is extremely useful in rolling, grinding, and wire drawing machines.
Salient Features: more...- Veeraja Industries
MAGNET BODY: The Magnet body is designed so as to generate optimum magnetic field and at the same time to provide the most efficient magnetic circuit, keeping the magnet weight to the minimum, without loss of performance making these magnets most suitable for attaching to the mobile cranes in the scrap yard. The magnet body is fabricated from high permeability low carbon steel for minimum leakage and maximum magnetic lifting & holding efficiency with utmost toughness. Heat treated fully annealed center pole, integrated outer pole, terminal box, and extra heavy duty lifting lugs are parts of the magnet body. Bumping plate of SS 304/Maganese steel is provided to withstand the great impact caused due to lifting of heavy metal pieces.
CENTER POLE: This is casted from high permeability low carbon steel for minimum leakage and maximum lifting capacity.
COIL: The coil is of Copper or Aluminum material and is designed for 'H' class insulation. The coil is insulated more...- Orton Engineering Private Limited, Thane
This kind of filter unit apply magnetic force for the separation and are generally used where magnetic particles (steel, cast iron) have to be separated from fluids. Usually they are used in combination with other filtration technics.
- V. M. Tecknologies, Bangalore
These drums have magnetic strength upto 6000 gauss on the surface and very high magnetic gradient. They can attract fine iron & iron oxide impurities from a distance of 50mm without any problem. This results in higher handling capacity & assures optimum purity of end product. The drum assures automatic separation of magnetic non magnetic materials & it used in automatic process line.
- Saideep, Mumbai
Customers can avail magnate separators from us at industry leading prices. We have the capacity and the ability to manufacture these separators as per the requirements of the customers. Mentioned below are the some of the specifications which mark our products: more...
- R. M. T. Tools (India) Private Limited
Our company is manufacturing magnetic separators which are used to separate ferrous particles from the fluid. These are used in filtration systems used for grinding machines. Following are the kinds of magnetic separators:
Drum type magnetic separators:
These drum type magnetic separators have two types which are: more...- Gloreal Filtration Systems Private Limited
Vee Blocks are made both in Soft and Hardened variety. Superior Surface finish, Proper grinding technique to achieve precision in 3-D geometry of Vee blocks are the hallmarks of Special Application Vee Blocks made by KUSARI ENTERPRISE. For soft V block, easily-replaceable hardened pads with critically maintained thickness are made. Hardened Pads are also available in a variety of shapes and sizes for different types of use. Hardened Blocks are reinforced blackened to provide anti-rust coating without distorting dimensions even in microns.
more...- Kusari Enterprise
Permanent Magnetic Tubes & Grids: Erich permanent magnetic grids are designed primarily for hoppers for the extraction of ferrous metals from free flowing materials such as plastics, food,grains, and minerals. Manufactured to any size or shape they are simply placed in the hopper to rest against the sides thus allowing the materials to flow through the grid. Two styles of magnetic grids are available in round and rectangular / square. Both are constructed of stainless steel with 1” diameter magnetic tubes.Available in ferrite and high power rare earth magnetic material. Magnetic tube are made as per customers specification. more...
- Erich Magnetic
We manufacture two types of liquid line separators which are T-Trap magnetic separators and plate style T traps. Our T- Trap magnetic separators are designed for heavy duty, large volume liquid and semi-liquid line flow systems. The T-Trap run on the principle of a slip-in cage of stainless steel permanent magnetic tubes, which capture ferrous tramp metal particles and improve the purity of the product.
When tramp metal protection is required for liquid lines carrying viscous to fibrous products, the plate style T-Trap is ideal. This magnet allows the product to flow through the housing without causing product bridging. Vertical position eliminates the sump area, and in horizontal lines, cleaning is made easier when the magnet element is installed on top. Our magnets are available in standard line sizes of 2” and 3” diameters.- Star Trace Private Limited
These type of separators are extensively used in:
• Non electric separators to separate tramp iron from non magnetic materials that are processed in bulk quantity for the purity of end products
• Recovery of metals having commercial value
• Protection of processing plant and machinery
These machines are also used in the processing industry for separating iron contamination from the following:
• Mineral
• Chemicals
• Food
• Flour plastics
• Grains
• Sand
• Cement
• Fertilizers
• Abrasives
• Glass
• Slag
• Ores
• Rock
• Refractor
• Size range
• Standard drum diameters: 300 mm, 400 mm
• Drum width range: 300 mm to 1200 mm
• Other sizes as per requirement
• Salient features
• Drum consisting of high energy rare earth neodymium permanent magnets
• Strong and rugged construction
• Automatic separator of iron- Star Trace Private Limited, Chennai
It is self-cleaning type of Magnetic Separation System with drive system and housing with feeding hopper. It is generally used in continuous process line where magnetic particles are separated and collected continuously in continuous process line where magnetic particles are separated and continuously in collecting chute meant for it. Non-Contaminated material is passed through for further processing. This system has internal stationary magnet and outside S.S 316 shell that is driven at constant speed. For most effective design of magnetic drum separator, the details required are :
(a) material flow rate
(b) contamination size
(c) characteristics of contaminated material i.e. free flowing / sticky
(d) Bulk Density
(e) Moisture content
(f) Product temperature
(g) dimensions of site location where it is to be installed.
We also supply magnetic drum without housing and drive system.- Universal Equipments
We manufacture drum type magnetic separators which has a magnetic drum with close dense magnetic field which is assembled on non-magnetic SS shaft. Magnetic pole shoes are projected out to form “fins”, for better magnetic field alignment around the drum. The drum is rotated very slowly by a geared motor drive. A non-magnetic SS trough holds the dirty fluid close to drum. Magnetic dirt is picked-up by magnetic field & is attached to the finned drum.
Slow rotary motion dumps the dirt collected on closely contoured scrapers. Extended scraper dumps the dirt collected to a bin. Size & number of fins is selected depending on the flow of fluid, viscosity of fluid & quantum of dirt to be handled. Positive rake scraper is selected for volatile fluid like water based emulsion while negative rake scraping is selected for oils. Negative rake scraper keeps the fluid away from bin.- Veeraja Industries, Pune
Electromagnet U shaped, instrument with plastic reels special quality have brass connectors.
- RAC Exports
We offer high quality magnetic pulleys, which are used for installing at the terminal head of main conveyors for the continuous extraction of iron contamination from the conveyor burden. These are used for protection of processing machinery such as crushers, pulverizes and other valuable equipments. Also it is used for purification of food stuffs, chemicals, pharmaceuticals and foundry sand.
- Pragati Enterprises
Magnetic Separator clarifies offer the excellent means of filtering for ferrous particles. Where purification is required and contaminates differ in form, size and composition, Magnetic Separator are recommended for Grinding, Honing, Transfer-lines and machining centre. It also can be used for rolling mills for filtering coolant which helps to improve the surface finish of the sheets.
Working:
The contaminated coolant from the machine is fed into the inlet of magnetic separator. The dust particular are attracted and arrested by the magnetic drum. The magnetic drum attracts the dust particles when is goes between body and drum with the help of a scraper dust and allows squeezes by a synthetic rubber roller mounted on the spring drive powder stored into the dust collecting tray. It filters almost 95% for ferrous particles.
more...- J. V. Engineering & Conveyors Private Limited
The high quality magnetic separators we supply to clients are available in low intensity as well as high gradient types to clients. These are designed to recover the ferromagnetic materials. We offer the separators in variety of sizes and diameters depending on the area of their application and clients need. The range is provided at the most competitive prices to the clients.
- Innovision Marketing & Distribution Private Limited
We offer our clients with high performance oriented magnetic seperators which used for removing ferrous dust particles from circulating fliuds/coolent used in machine tools. Designed for floewrates which ranges from 50lts/min(LPH), 70 (LPH), 100(LPH) and above.Its psecificstoons are: more...
- Superior Engineers
Paper Band Cum Magnetic Coolant Filters
Highly efficient way of filtration guarantees fine finish, dimensional accuracy, increases tool life.Keeps your machine clean & reduces costly machine down time.Avoids bacterial growth & wastage of expensive coolants.The filtration system is automatic,no manual attention is needed.Where heavy stock removal increases the temperature of the coolant,this filter helps to reduce temperature of coolant,this filter hepls to reduce temperature due to exposure to air.
Magnetic Coolant Filters
'UNIVERSAL' Magnetic Coolant Clarifiers are designed for continuous filtering coolant oils contaminated with ferrous materials. These equipments are light weight, compact design and can easily be installed. These Magnetic Coolant Clarifiers are manufactured in two models. KTP & NRM. Capacities 30 Lpm to 100 Lmp.- Universal Precision Tools
An adhesive less way to advertise
We offer Flexible Magnets in Rolls, Sheets and Tapes form. These are available on customized basis.
Applications: more...- Sanbros Engineering Works
Avail from us a wide range of magnetic components such as: more...
- Telmat Materials And Technologies India (P) Ltd.
