 |
 |
 |
 |
|
|
 |
|
|
||||||||||||
|
Products Directory > Plant & Machinery >
Natural and Industrial Gas Plants & Equipment
Products - 690
|
Product Categories |
| Acetylene Plants - 15 Cryogenic Tanks - 11 Natural Gas Plants - 32 PSA Plants - 25 | Gas Generators - 71 Hydrogen Generator - 12 Oxygen Generator - 30 | Gas Plants - 159 Nitrogen Plants - 89 Oxygen Plants - 70 |
Displaying 1-20 Unique Products of Total 690 Products Found
Products
Air Compressor
This is a multi stage, heavy duty water-cooled air compressor for 24 hours operation, horizontal type complete with fly wheel inter cooler, foundation bolts, motor pulley, motor, v belt, guard and slide rails. This is used to compress atmospheric air.
Air Purifier / Process Skid
This consists of the following Parts:
1) After cooler with tank
2) Nitrogen cooler with tank
3) Moisture separators
4) Chilling units with Freon unit
5) Oil absorber filled with alumina
6) Molecular sieve batteries on skid
7) Defrost heaters
8) Gas/Air/water line as per standard layout on skid /platform prefabricated and ready for installation
9) Water pump
10) Inlet & outlet water lines
11) Drain manifold complete with ball valves for draining moisture. All the above equipments are properly mounted on skid /platform complete with interconnecting piping and ready for installation
Expansion Engine
Complete with branded motor/starter of Siemens / more...
Our PSA oxygen generator uses zeolites molecular sieve as sorbet, produces oxygen by making use of the PSA principle. Under certain pressure, zeolites molecular sieve has different oxygen/nitrogen adsorption capacity that is much more nitrogen adsorption capacity than oxygen adsorption capacity. PLC controls pneumatic valve on/off to realize two towers alternate adsorption and desorption as per pressure change, carries out oxygen/nitrogen separation and produces oxygen with desired purity
Some specifications are:
more...
We offer our clients a wide gamut of moisture separators that are used for various industrial purposes. These are designed to act as moisture separators cum filters for gas and compressed air. The structure of our range of moisture separator consists of a completely sealed high performing cyclonic type mechanical moisture separator cum filter. High on durability and efficiency, these separators can sustain even the harshest surroundings.
|
Air Care Equipments, Pune
 |
|
(I) Air compressor: Screw/ low pressure- type:
We employ the most advanced compressor series available in the market. They have a unique combination, meeting customer requirements for low installation, operating and maintenance costs with high dependability and ease of use.
Screw type rotary compressors are one of the most advanced and trouble free.
Centrifugal Type Compressor: No other turbo type oil free compressor can match its efficiency and economy. This ensures a consistent and highly reliable source of air supply. Maintenance is extremely low.Oil free piston compressor are also very succesful due to V-Type configuration on very low working pressor.
(II) Pre – Cooling system:
The pre-cooling system is a highly efficient skid mounted equipment provided with the main purpose of cooling down the air to a temperature of 5 to 8 degrees Celsius and thus to discharge the condensed water. We are using highly reliable compressors of European more...
|
Universal Industrial Plants Manufacturing Co.(P) Ltd.
|
|
Product Description :
• Air Fan and Vacuum Pump
• Temperature Regulating System
• Adsorption System
• Oxygen Buffer Tank
• Control System
Technical Index
Oxygen production :- 100~3000Nm3/h
Oxygen Purity :- 50~95%
Outlet pressure :- 0.015~0.05MPa (adjustable)
Features :
• Quick and convenient start and stop.
• Low investment and energy consumption.
• High automation.
• Simple operation and maintenance.
• 5 Short installation period and small ground treatment workload.
|
Sam Gas Projects Pvt. Ltd
|
|
The cryogenic liquid Nitrogen plants are available in sizes from 50 m³/hr (70 liter/hour) to 500 cum/hr (700 liters/hour) capacity. It is safe and efficient to operate and the oxygen confirms to North American and European Pharma copia and standards.
more...
|
BDM Cryofusion & Mandressi Italia
|
|
With our years of experience and expertise, we are able to design Liquid Oxygen Plants. Available in small, medium and large capacity these are widely used in Water Process, Ferrous Metallurgy, Non-ferrous Metal Refinery, Coalmines and Pharmacy and can be availed by our clients at industry leading prices.
Following are some of its salient features:
• Fast and Easy to Operate
• Compact Design
• Latest Technology
• Practically Zero Maintenance
• Low Power Consumption
• Liquid Air Separation Technology
• Skid Mounted
• High Purity of Nitrogen >99,5% (99.999% Optional) Suitable for
• Soft Drinks,Juice,Beverages and Industrial uses
• Liquid Nitrogen Pump (Optional) can be added for direct compression of Nitrogen into Cylinders
• Single Electric Panel
• Cylinder Filling Station (Optional)
Our range of liquid oxygen plants finds application more...
Commercial hydrochloric acid is available in the market as 30% aqueous solution and is widely used in industry in large quantities. But for certain applications e.g. in bulk drug/pharmaceutical industry HCI gas is required in anhydrous state for critical reactions where moisture cannot be tolerated. Such users generate anhydrous HCI from commercial grade for their captive consumption. Several methods have been adopted but generation through SULPHURIC ACID ROUTE is the most reliable and handy technique. Operational reliability – the unit can be started/stopped in seconds Compact and continuous unit – all operations viz. drying, mixing, gas generation and cooling achieved in same unit. Available in wide range capacities – from ±5kg to 200kg/hr of dry HCI. Except cooling water no other utility e.g. Steam, chilled water etc. are required. • Anhydrous gas. • Ease of installation. • Capable of operating from 25-120%. • Negligible pressure drop more...
Our well equipped manufacturing unit enables us in gas generating set erection as per the specific requirement of our customers. The installation of compressed natural gas gensets from 50 kwe to 1160 kwe can be provided on individual basis.
Nitrogen gas generators produces nitrogen gas from atmospheric air by PSA (Pressure Swing Adsorption) technology. PSA technique is a simple & reliable process of separation of nitrogen from compressed atmospheric air by adsorption of oxygen over a bed of Carbon Molecular Sieves (CMS). CMS is an adsorbent having infinite number of small pores. The diameter of the “Bottle Necks” is in the same range as those of the molecules. Thus when CMS is used in the PSA process, an Oxygen Molecule, having a smaller diameter than a Nitrogen molecule traps in to the pores. Therefore the nitrogen is recovered to a high degree while almost all the oxygen is adsorbed. Process:- The production of nitrogen gas from atmospheric air is based on pressure swing absorption (PSA) principle by adsorption of oxygen gas using a special grade of imported carbon molecular sieves (CMS). Atmospheric air is compressed by an air compressor to a pressure of 7.0 kg/cm2g and cooled to ambient more...
Owing to the dedication of our adept professionals we successfully install Fuel Gas Recovery Plant in different manufacturing industries. The machines and equipment used for the purpose are stringently checked by our team of quality controllers who take initiative in ensuring that the best and flawless gamut is provided to our valuable clients. more...
Nitrous Oxide is produced by heating Ammonium Nitrate to a temperature of approx. 250 deg.C. Ammonium Nitrate is decomposed in the process to give a mixture of Nitrous Oxide and super heated steam. Impurities include Ammonium Nitrate fumes, Nitrogen and other oxides of Nitrogen. The steam and impurities are removed by scrubbing with water, caustic soda and sulfuric acid. Nitrogen present in traces is removed by bleeding from the top of storage vessels, where Nitrous Oxide in liquid state is stored after compression.
Properties of Nitrous Oxide: Nitrous Oxide is a chemical compound of Nitrogen and Oxygen. Its chemical name is N2O. It is a colourless, non flammable, nontoxic gas with slightly sweetish taste and odour. Well-known method of distributing Nitrous Oxide is as compressed liquid in cylinders of approved design. It keeps combustion, therefore organic oils and greases of petrochemical nature be kept away from Nitrous Oxide gas. more...
We supply broad gamut of liquid nitrogen containers used to store variety of liquid gases such as liquid nitrogen, liquid oxygen etc. Sourced from well established vendors across the country, these are available in variety of capacities as per client's requirements or industrial applications. The are offered at best market prices to our clients.
It is a range of aluminum cryo containers, mainly used in artificial insemination programs, laboratories and small consumers of liquid nitrogen. Sturdy, efficient, light weight and compact, the containers display amazing performance in terms of lower evaporation loss, longer holding time and adaptability to Indian road conditions. Features like double walled aluminum vessel, fiber glass neck tube and super insulation reduce heat losses to the lowest standardized levels.
Containers range from a minimum capacity of one liters to a maximum of 50 liters.
The technical features of Containers are: more...
We provide a wide range of raw materials and spare parts for industrial gas plants, medical gases plant and gas cylinders, especially for calcium carbide and aluminum nitrate. With the support of our advanced warehousing system, we can supply industrial gas plant spares and raw materials on turnkey basis for existing as well as new projects. more...
We are offering Biogas Plants for Animal Shelters that are used to produce biogas from animal dung. These can be built above the ground or below the ground with minimum civil work. Our range of Biogas Plants for Animal Shelters are specially designed for dung from cattle shed, poultry and horse stable. The design of the plant is user friendly so it can be easily operated and maintained in rural areas by semi skilled labors. Further, following are some of the key features of our range of Biogas Plants: more...
Our clients can avail from us a high quality range of ARTI Biogas Plants that is manufactured using molded plastic. These are floating dome type biogas plants designed for household application. The primary use of these biogas plants is waste management, whereas the secondary uses include biogas for partial substitution of LPG in the kitchen and watery slurry available for ferrigation. Features: more...
We take up solid waste treatment projects for industial canteens, shaadi mahals, residential apartments. The biodegradable waste e.g. food waste, vegitable cuttings, fruit waste and flower waste etc are seperated and subject to anaerobic digetion. In the process reusable biogas and fertile manure is released. The project comes under reusable energy. Our designed biogas plants are compact and maintenance free.
We offer our clients PSA nitrogen system which provides Nitrogen gas at the outlet at purity of 99.99% up to 3ppm (lppm in some models). It has a plant installed which has above 500M3/hour and can be provided with automatic PLC control. Along with the product, we also provide qualified engineers for Supervision, Installation and start up of all our plants as well as training of manpower at customer’s site. The different kinds of PSA nitrogen system we offer are as follows:
Small Capacity Plants more...
Owing to our vast experience in this field, we are offering CO2 manufacturing plants on turnkey basis to our esteemed clients. These plants are based on both high pressure and low temperature process, with capacities ranging from 10 TPD to 200 TPD and product purity of 99.99% by volume. For this, we undertake all the work, which includes each and every aspect right from know-how and designing to commissioning & installations of these plants. Further, we provide these solutions at highly competitive prices to our clients.
We offer precision engineered nitrogen gas generators for tyres, to our clients. These high performance nitrogen gas generators are used for inflating vehicle tyres with the help of nitrogen gas. These nitrogen gas generators are manufactured with advanced technology & are available with enhanced value added features. We manufacture these N2 gas generators in various capacities for inflating the tyres of light as well as heavy motor vehicles. These nitrogen gas generators are being widely used in the automobile industries. Our clients can avail these N2 gas generators from us at industry leading prices and in a customized form according to their specific requirements.
Category Matches
Related Trade Leads
|
|
We are offering to selling of gas plants that include acetylene gas
plants, natural gas plants, oxygen gas plants, ub Series oxygen gas
plants, ubl... (Sell) |
|
We offer anthocephalus cadamba. (Sell) |
|
|
Leading manufacturer and supplier of all types of nitrogen generator,
oxygen gas genertor compressed air dryer, ammonia cracker, lab scale
nitrogen... (Sell) |
|
|
We are offering divesre range of generators like:
- Nitrogen Generators
- Oxygen Generators
- Hydrogen Generators etc.
* Features:
- Ea... (Sell) |
|
|
Oxygen Gas Plant work on psa (Pressure Swing Adsorption) technology.
Using this technology, we produce oxygen gas generators that are low on
mainte... (Sell) |
Tender Notifications
