 |
 |
 |
 |
|
|
 |
|
|
||||||||||||
|
Products Directory > Industrial Supplies >
Compressors, Air Compressors & Compressor Spare Parts
Products - 849
|
Product Categories |
| Compressor Parts - 123 Gas Compressors - 13 | Air Compressors - 149 Compressor Spares - 109 | Air Dryers - 85 |
Displaying 1-20 Unique Products of Total 849 Products Found
Products
1/2 HP Dental compressor seal unit fitted with safety valve for air release excess sorted, auto cut off system, pressure gauge and drain valve air rotor air compressor mounted on high pressure tank entirely powder coated paint, Power ½ HP Amperes 4.5 Flow 40 to 50 Liter per minute Speed 1000 rpm Noise 50 to 60 dB (A) Power supply 220V, 50 Hz Tank 25L Pressure 350 MMHG Weight 35 to 37kgs more...
|
Rajas Enterprises (India)
  |
|
• Air Compressor This is a multi stage, heavy duty water-cooled air compressor for 24 hours operation, horizontal type complete with fly wheel inter cooler, foundation bolts, motor pulley, motor, v belt, guard and slide rails. This is used to compress atmospheric air. • Air Purifier / Process Skid: This consists of the following Parts: 1) After cooler with tank 2) Nitrogen cooler with tank 3) Moisture separators 4) Chilling units with Freon unit 5) Oil absorber filled with alumina 6) Molecular sieve batteries on skid 7) Defrost heaters 8) Gas/Air/water line as per standard layout on skid /platform prefabricated and ready for installation 9) Water pump 10) Inlet & outlet water lines 11) Drain manifold complete with ball valves for draining moisture. All the above equipments are properly mounted on skid /platform complete with interconnecting more...
|
BDM Cryofusion & Mandressi Italia
|
|
We offer our clients an array of heatless air dryers that are extremely effective in removing the heat and exhaust emitted from the machines or other equipment in the work area. Applicable in various industries, these air dryers not only remove heat from the atmosphere but also facilitate in making the air moisture free.
Technical specifications:
Our range of heatless air dryers consists of the following parts: more...
|
Air Care Equipments, Pune
|
|
Our Company was established in 1985 by Mr. Sanjiv Agarwal who is a qualified Chemical Engineer & specialized professional in the design & manufacture of oxygen & nitrogen production plant. We commenced manufacturing of nitrogen & oxygen production plant at our factory at New Delhi and air separation columns in Genova, Italy.
The designs of our plants were based on the process cycle of Linde & Claude which had been started by Dr. Boschi of Italy with their company ING. L&A. Boschi of Italy in 1930 and perfected with over 70 years of experience.
Our very close association & interaction with the Italian company for over 15 years whose plants are working all over the world in European countries like Italy, Germany France, UK & Australia, and others gave us required exposure and experience in the industry. These plants, based on the Boschi technology, were also exported to Turkey, Greece, Iran, Sharjah, Abudhabi, Quatar, Mauritius, Zambia, Nygeria, Dubai, Syria, South Africa, Egypt, more...
|
Universal Industrial Plants Manufacturing Co. Pvt Ltd
|
|
In this design there is NO LOSS of compressed air. Time cycle is 4+4 hours with (-) drying towers filled with SILICA GEL desiccant. For regeneration, a centrifugal air blower and an electrical heater is provided. Desiccant is heated upto 200degC by hot air for complete regeneration. These dryers are bulky in size and the power consumption is almost double as compared to "INTERNALLY HEAT REACTIVATED TYPE DRYER". In capacities less than 500 NM3/hr these are uneconomical and not recommended. Also, since regeneration of the desiccant is by atmospheric air, these dryers give Dew Point only upto (-) 40oC.
Cost wise these Airdryers are 100% more costly as compared to "Internally Heat Reactivated Type Dryers". One should go for this type of Dryer only when loss of compressed air during regeneration is not acceptable and Dew Point required is not critical. These are recommended for capacities above 500 NM3/hr only. Operating pressure can be from 1 kg/cm2g to 50 kg/cm2g.
more...
|
Sam Gas Projects Pvt. Ltd
|
|
Air Dispersion Dryers Drying of wet cakes, pastes and sludges. When producing powders from aqueous suspension, it is a distinct advantage to first mechanically dewater so as to reduce the plant initialization and operating costs of the final drying stage. During dewatering suspensions are converted to either filter cakes, pastes or sludges. Drying of such material thereafter is ideal in Air Dispersion Dryers. The selection of a particular dryer depend on the nature of wet deed cake particle size distribution of final powder and the drying nature is usually characterized by Drying Curve as shown. The selection of the most suitable dryer depends upon nature of the wet feed cake.
We manufacturer of centac coolers on replacement parts. our range is from 1000 to 40,000 CFM for various models of ingersoll rand centac and wide variety of material construction.
Oil free air compressors are offered with air feed ozone generators, which feed gas to the oxygen generators. These air compressors are provided with inbuilt heat exchangers to supply cool air always. Cool air in generators increases the production of ozone.
Our company offers vacuum boosters, which are used in growing number of applications where fast pump down times are required, and environment or energy usage concerns, rule out any alternative pump selection. These pumps enhance the performance. The ultimate vacuum and pumping speed of oil-sealed / water-ring / dry vacuum type of mechanical pumps are used in diverse industry. Some of the outstanding advantages include: more...
Compressed air is an ideal energy source for many production process.We have an in-house designing unit to design and manufacture the Compressed Air Dryers which forms an essential element of Compressed air systems. Our manufactured Refrigerated Type Compressed Air Dryers conform to the international standard and efficiently removes all the moisture and lubricants from the air during the compression process. Some of the essential features of our product that has helped us gain fame and recognition in the national level are: more...
We are manufacturing and supplying high quality Heat Exchanger spares which includes plates and coolers, gaskets, air compressors etc. These Heat Exchanger spares ensures reliability of our raw material source and ensures the quality of our products throughout the production line.
This Airline Lubricator is designed to provide sufficient lubrication to ensure smooth working and prevent frictional wear on the piston.
The obvious result of insufficient oil is frictional wear. The piston in the average Rock Drill reciprocates about 1800 to 2000 times per minute. Other internal parts move at corresponding rates, so frictional wear can be considerable. Friction produces heat, and this is the factor that causes real trouble. Despite fine metallurgy, lack of oil can produce heat, sufficient to cause minute surface cracks that many result in complete breakage of the parts, hence use of Air line lubricators. We supply variety of rock drill spare parts, airline lubricator, compresses air line lubricator, air compressor parts, air compressor spares, automotive air compressor, three wheeler parts, two wheeler parts, auto spare parts, drilling rods, pneumatic jack hammers, jack hammer tools, jack hammers equipment, hand operated jack hammers, pneumatic breakers, pneumatic more...
We are one of the most recognized manufacturers of air dryers. These air dryers are of two types:• Refrigerated Air DryersOur refrigerated air dryer has lowest running cost because there is no purge losses. This system is most efficient and economical to use for most of the applications and is widely accepted in all manufacturing industries.• Heatless type Compressed Air Dryers:Our dryers are required in pharmaceutical, powder conveying systems, Pneumatic conveying of hygroscopic materials e.g plastic raw materials, cement conveying, high quality painting jobs in auto industry and CNC machines etc. Our system is the most simple, reliable and economic system amongst all other type of dryers where very low dew point upto -80°C is required. From our end special dryers for gases like oxygen, nitrogen and hydrogen etc are also available. more...
We have been manufacturing a wide range of Reciprocating Air which is customized as per the specifications of our clients. These are designed in accordance with various industrial standards and possess following specifications: more...
We offer a complete assortment of refrigeration compressors spares. These spares are used in HVAC industry as well as in various other industrial applications. Having superior performance & reliability, our complete collection of refrigeration compressors spares meets the varied requirements of our clients.
We offer CP Series - Silenced Screw Air Compressors, which is heavy duty air compressor for 24 hours operation. The range includes: more...
Theory Of Operation:
In HOC type dryer, hot air at 120 degree celsius to 140 degree celsius from Compressor discharge is directly used for the desiccant regeneration. Running cost of this dryer is virtually NIL. It has two drying towers filled with the Activated alumina or molecular sieve desiccant and they alternate in process every 4-hour automatically.
Compressed air directly from air compressor discharge is taken to air dryer inlet through pipelines at 130 degree celsius (Min) temperature. This hot air is passed one drying vessel where saturated desiccant is regenerated by this high temperature air. After picking up moisture from bed, this air is cooled in an intermediate cooler. Here moisture is condensed and removed by an auto drain trap. At 40 degree celsius temperature this air passes through second drying vessel where moisture gets adsorbed and dry air comes out. Cycle time is 4-hours regeneration and 4-hours drying. After 4-hours changeover of vessels takes more...
We offer a range of diligent ratiocon air fuel ratio regulator which is also called stoichometric ratio. Features: more...
We are amongst the reputed manufacturers and exporters of AFRL that has gained wide appreciation for its quality standards. Rugged in design AFRL has maximum pressure of 17 Kg/cm2 and maximum temperature of 85°C for metal bowl. These are widely acknowledged in several industries for precision functioning and longer service life. Features: more...
We are engaged in offering a wide range of air drying units that is manufactured in our state-of-the art manufacturing unit. Known for its excellent quality, high material strength, low maintenance and other unique features, our range is appreciated across the globe. We also meet customized requirement for our clients benefit.
Category Matches
Related Trade Leads
|
We are offering wide range of gas drying units like:
- Heatless Type Dryers
- Internal Heat Re-activated Dryers
- External Heat Re-activated ... (Sell) |
|
|
Offering compressor valve plates, the compressor valve plates made by us
are produced using stainless steel. They are both sides lapping and
assure... (Sell) |
|
|
Offering compressor parts and pneumatic products having following
specifications:
We manufacture and design all types of Industrial Reciprocating... (Sell) |
|
|
We manufacture and design all types of Industrial Reciprocating Air ,
Gas and Refrigeration Compressor Spare Parts that are used in various
cold st... (Sell) |
|
|
Kc discharge valve assembly: Offering a Guard is made up of Cast Iron,
and Seat is made up of Cast Iron as well as of Steel. Valve Plates are
made ... (Sell) |
Tender Notifications
B2B Newsletter Subscription
 |
 |
|
About Us | Press
Room | Awards
| Commendations
| Success
Stories | Contact
Us | Terms
of Use | Privacy
Policy | Feedback
| Help |
| © 1996-2009 IndiaMART InterMESH Limited. All rights reserved worldwide. |
