![]() |
|
||||||||||||
|
|
Products Directory > Electronics & Electrical >
Circuit Breakers, Relay Switch, Relay Circuits & Switches
![]()
Products - 3018
|
Product Categories |
Displaying 1-20 Unique Products of Total 3018 Products Found
Products

A device to switch off electrical motors/engines taking drives from a speedometer cable in case of high speeding. Over Speed switch has a mechanical reset type switch.
Range : 400 rpm to 2000 rpm.
Voltage : 12V/24V DC, 230VAC
5Amp max more...
|
Rico
|
|
![]()

Bend version float switches are used for applications where in there is a mounting constraint from the top and require Normally Open Contacts. These bend version level switches have rugged construction and can be used for both indoor & outdoor applications.
![]()

We manufacture and supply GOAB switches that are designed to suit overhead systems used in high density urban situations or high load centers. These are specially used where the load current is much higher and the need of improved quality supply is much greater. The main function of this product is to isolate the transformer from distribution system and also used for system isolation from distribution network. Key specifications: more...
![]()

We manufacture and supply automatic changeover switches that have:
• Three Phase 60 A and
Size: (LWD mm) 345 / 240 / 90
This switch comes between the operating voltage of 150 V to 280 V AC
Also with the following features for enhanced efficiency:
• Improved circuit design enabling the relay to be in 'On' position only while the genset is in use
• While functioning on main supply the relay remains in 'Off' position
• Minimal switch over time for main supply so that even sensitive equipment like computers do not get disconnected during the switch over
• On resumption of main supply, the connected load is automatically shifted on mains
• Automatic engine switch off system for portable generators (running on petrol / kerosene) when main supply is resumed more...
![]()

The Dip switches imported and exported by us are designed for use on printed circuit boards and other electronic components. Basically it is used to customize an electronic device behavior for definite situations. The product is offer in specifications:
1) 2 Way Dip Switch
2) 4 Way Dip Switch
3) 6 Way Dip Switch
4) 8 Way Dip Switch
5) 10 Way Dip Switch
6) 12 Way Dip Switch more...
![]()

We specialise in offering quality switchgear parts that are manufactured from quality brass. These products can be customised as per the specifications and requirements of our customers who are spread all across the globe.
![]()

We manufacture buchholz relay that plays a major role in isolation of electric equipment and clearing faulty downstream, by means of Switchgear. It also helps in preventing short circuit and protecting electric circuit from damage caused by overload. Our range of relays can be customized as per the requirements of our clients.
![]()

Carbon Brushes: All type of carbon brushes for over head cleaners DC Motors, Generators etc.
Pressure Switches: Differential pressure switches like Varma tarfag, Astrix, Indfos, Orien Pressure.
Switches are assembled in spinning, Combar, simplex, compressors and generators. more...
![]()

Isolators Airbreak Switches
We supply quality Isolators Airbreak Switches that are highly reliable and robust. The high proportion RX component of the equipment is made from stainless steel that provides maximum protection from the corrosion. These switches are available with laminated flexible connection supported by spring steel strip that provides the switches long service life. These switches are available in different power specifications including high and medium voltage.
Medium Voltage
The medium voltage isolators are available with adequate section to break magnetizing current of the transformers. These isolators are used for both indoor as well as outdoor purpose. All the ferrous parts of the isolators are hot dipped galvanized and non ferrous parts are heavily tinned to withstand extreme weather.
Technical Specification more...
![]()

We provide an extensive range of supreme quality HT drop out fuses. Our range is made with qualitative raw materials and is well known for its effective performance and longer operational life. These are widely used for system protection as the secondary back-up against faults. To prevent the faults, our drop out fuse is installed high voltage. more...
![]()

We offer a wide range of Temp. Sensors and Switches, Pressure Switches, Solenoide Valves and Potential Sensors that is in great demand because of high efficiency and durability. Our range of products in thoroughly checked at every stage to ensure the quality at par with international standards. The entire range of Temp. Sensors and Switches, Pressure Switches, Solenoide Valves and Potential Sensors includes: more...
![]()

The buchholz relay that we are manufacturing are available in different range thus suiting varied requirements of our customers. Its range varies from 25 mm, 50 mm and 80 mm and it is as per IS-3637. We make use of pressure- die casting process for manufacturing its structure made of aluminum.We offer Buchholz Relay with MERCURY SWITCHES, MICRO SWITCHES and REED SWITCHES (Magnetic Switches).
![]()

Bridging the utility with standby power is no small job, which is why our transfer switches are indispensable to the all-KOHLER power system. The new generation of transfer switches - is loaded with sophisticated technologies and advanced design features that ensure transfer of power to critical-load applications.
When power fails, power is transferred from the standby system within one-sixth of a second. And you continue functioning as normal. more...
![]()

Our offered range of Compact Flow Switch for Inline Pressure - FS380ei is sourced from most reputed vendors to maintain the industry standards. These rugged inline flow switches use 150 micron filtration and are less susceptible to clogging than other high-pressure inline flow switches. The one-piece magnetic PPS composite piston makes the FS-380 ideal for high-pressure applications such as industrial cleaning equipment or high-pressure lubrication systems.
more...
![]()

We are engaged in manufacturing of Feeder Pillars that have a specified standard of protection IP:55. These pillars are perfect for outdoor use and are widely applicable in different non-industry and industrial applications. Our specialization lies in designing the pillars as per the specific requirements of the customers. We are achieving accurate results in our production by mixing variety of resources in our manufacturing process. These feeder pillars are extensively used in: more...
![]()

We design and develop a wide gamut of pressure sensing pneumatic proximity switches (Air Limiter) model PPS-01 that offers electrical signal during change over contact. These pneumatic proximity switches gives accuracy on the back pressure that are developed by the air jet contact on the object such as dimensioning, positioning, and working surfaces. These are also known as Part Seat Check Switch.
The distance perceived by this switch is dependent on the profile of the surface. This typically being 0.01-0.15mm.
![]()

We specialize in manufacturing and supplying a diverse range of electrical contactor, electrical relay, electrical starters and linear coils. Our assortment of stainless steel coils is available with coil measurement S.E. CU Wire 12 SWG to 50 SWG. Besides, it is also made available in many grades that depend upon the quality of raw material used in fabricating them. Based on the specification of our clients, we supply it in different length, thickness, width and surface finishes. These coils are widely appreciated to meet the requirements of diverse industries such as construction, metal works and automobile. more...
![]()

We manufacture a wide range of electrical components which are made of high quality raw material with the use of highly sophisticated machines. The wide range of components includes links, clamps, yokes, terminal clamps, wiring accessories junction boxes. Contacts, Lamination assemblies, clip, fuse, heat sinks, lugs, cup, rocker, cover, inserts, extruded profile, cable ties, stainless steel cable ties, cable ties with polyamide coating and stainless steel cable ties with polyamide coating.
![]()

MAGNETIC LEVEL SWITCH - SIDE MOUNTED
Magnetic level Switch(side mounted type) is float operated working on magnetic repulsion principle. Simple in design and robust in construction together with strict quality control makes the switch a very reliable product. This can be used for initiating high or low audio-visual signals or automatic level control of liquids in pressurised or open tanks, containers, hot water service, sterilizing equipment and a variety of process control fluid tanks.
OPERATION
The float assembly carries a permanent magnet. With the float movement this magnet repels another magnet kept inside the switch housing which inturnactuates a micro-switch having snap action of contacts.
SPECIFICATIONS (For std. Model)
Float Assembly & Connection Flange: SS-304/SS-316
Switch Housing: SS-304
Differential- fixed: 15mm app.
Minimum sp. Gravily of liquid: 0.7
Max. Working Pressure: 10.5 Kg/cm²
Max. more...
![]()

We offer a wide range of pressed components, which are available in different finishes like Brass natural, Electro-Tinned, Nickel, etc. We provide special pressed and drawn components for Switch gears, Electrical, Electronic, Automobile and other electromechanical applications.
Features -
• Plain washers to BS 4320: 1968 DIN 125, 433 and 9021
• Pressing upto 3mm thickness can be provided on 30 tonnes press more...
![]()
Category Matches
Related Trade Leads
|
We are offering float switch:
Designed for level control purposes in water tanks. Horizontal and Vertical types available. Relay contact rating -... (Sell) |
|
Offering Automatic Heating Pad fitted with thermostat which
automatically controls the temperature. No water needed produces its own
moisture tempo... (Sell) |
|
|
We require thermostat switches for roti maker machine. The volt is
1000v. Our requirement will be more than 2000 pcs every month. (Buy) |
|
Pressure switches :
Make - orinon
Model - Mn
Type - H01 CA10
Sr no- A0404421 (Buy) |
|
We are offering diverse range of electrical switches like:
- Manual Switches
- Matrix Switchers
- Pan Unit And Accessories
- Multi Page Qua... (Sell) |
Tender Notifications
B2B Newsletter Subscription