Sift and strain ingredients through the wire mesh construction of this durable stainless steel strainer. The long handles facilitate easy lifting up and serving. Raised bottom of the strainer enables the water to drain off completely.

Air Compressor

This is a multi stage, heavy duty water-cooled air compressor for 24 hours operation, horizontal type complete with fly wheel inter cooler, foundation bolts, motor pulley, motor, v belt, guard and slide rails. This is used to compress atmospheric air.

Air Purifier / Process Skid

This consists of the following Parts:

1) After cooler with tank
2) Nitrogen cooler with tank
3) Moisture separators
4) Chilling units with Freon unit
5) Oil absorber filled with alumina
6) Molecular sieve batteries on skid
7) Defrost heaters
8) Gas/Air/water line as per standard layout on skid /platform prefabricated and ready for installation
9) Water pump
10) Inlet & outlet water lines
11) Drain manifold complete with ball valves for draining moisture. All the above equipments are properly mounted on skid /platform complete with interconnecting piping and ready for installation

Expansion more...

These filter press are very extensively used in oil mills, chemical works etc. Our filter press are most suitable for cleaning oil drawn from the different expelling plants. The filtering capacity varies with the viscosity of the oil & liquids & with the amount of sediment contained therein.

Filter press consists of chiefly C.I. square plates, mounted parallel on heavy flat M.S. bars fixed on heavy cast iron stand. All filter press are supplied with air vessel, cloth clips, cocks, M.S. gutter & best quality belt driven plunger pump at 50 R.P.M. The oil or liquids pressed by a belt driven plunger pump passes through filter cloth fitted to either side of each plate. All impurities are retained by the filter cloth, the filtered oil leaves the chamber through cocks fitted to each plate & flows where it is collected.

Specification:
more...

Storage vessels are used in wide range of Applications more...

It is made from glass fibers of progressive construction. The fibers are increasing in density in direction to the exit air side. Mainly used to collect dusts in HVAC systems and auto rolls. Available in standard size but is customizable as per client requirements.

Aguapuro series FRP Filters are available from 8“ to 63“ diameter sizes and from 0.5 to 35 M3/hr Flow rate when operated on 30 m/hr velocity.


Units are available with either individual Ball valves or Single Lever operated Solo Multi Port Valve depending on the requirement. Being constructed from Composite FRP vessel and High Impact PVC Pipe work and valves, it gives complete corrosion free operation.


Individual Ball Valves OR Multi Port Valve provide ease in operation of backwash and rinse which is indicated using Inlet pressure gauge.


Low Installation cost, Easy and Fast Installation, Almost nil maintenance cost are the additional features for these units.


Auto MPVs are available for Specific applications. Auto Pneumatic Valves OR Solenoid Valves are also available.

This is a device to separate solids (in powder or granular form) from air/gases. When the material is moving as in pneumatic conveying, the solids are separated. In this device, air is made to flow at cyclonic speed and made to rotate in a cylindrical vessel of suitable design. When the solid material attains high speed, it picks up centrifugal force and choose to cling to outer surface while air retains high speed it gets due to its velocity factor. Suddenly in the center, air outlet is provided for air to go out while due to centrifugal force the solid material is not able to change direction but goes downwards and gets separated.

This device is capable of offering separation efficiency up to 90%, of course, depending upon, design, material, bulk density etc. There is one collecting hopper where material gets collected. Smaller the diameter, better is the efficiency.

Multi Cyclone

When volume of air flow is large, single cyclone tends to become more...

Filter Press
Suitable for pharmaceutical syrups, chemicals, beverages, liquids, cosmetic, paints, inks etc. Available in three different sizes of 8?, 14? & 18?. 18? dia. along with gear / centrifugal pump.

Colloid Mill
This unit is ideal for homogenizing, dispersing, mixing of products. The operation is based on rotor - stator principal. The above unit is available in plain as well as water jacketed models which are suitable for heat sensitive products, the product is fed by specially designed hopper to the operating area of the rotor, having a speed of 3000 rpm. the product is processed by a high shear, pressure and friction between stator and rotor. Tapering of the rotor and stator the angular gap becomes narrower towards the discharge section. The product continuously leaves the mill though a drain pipe or it can be recirculated if required.

The above unit is used in pharma, chemicals, food, cosmetic industries. more...

Our UV disinfection units are widely used for residential purposes. The UV design is quite simple. Its main component is the UV light source, which is enclosed in a transparent protective sleeve. It is mounted so that water can pass through a flow chamber, and UV rays are admitted and absorbed into the stream. These rays destroys bacteria and inactivate many viruses. It does not create new chemical complex, nor does it change the taste or odor of the water, and does not remove any beneficial minerals in the water.

Cyclone separators are used to remove 99% of free liquids and solids 5 microns and larger. They are used as slug catchers and inlet separators for plants or for gas well test separators. We also manufacture vertical cyclone separators for compressor suction scrubbers and inter-stage scrubbers.

Mechanical separation of soils (oils and grease). One of today's manufacturing goals is that of source reduction. Source reduction is the better use of materials and the energy and labor required to convert those materials, as well as a reduction in the waste generated by each manufacturing operation. Source reduction equates to process cost reduction and, for that reason, its focus is altering most operational practices.

Until now, one of two principles of mechanical separation has been commonly used, namely adhesion techniques (such as an oil wheel/disk, hose or belt skimmer) or by skimming (weir skimmers, tank overflow to drain). There is always advantage in simplicity, although there are built-in disadvantages to using either of these methods in the aqueous cleaning process.


Due to skimmer construction features, users can either allow a thick layer to accumulate and skim oil only, which means a constant surface layer of oil. Or they can overflow or skim off a top more...

We offer our clients an array of heatless air dryers that are extremely effective in removing the heat and exhaust emitted from the machines or other equipment in the work area. Applicable in various industries, these air dryers not only remove heat from the atmosphere but also facilitate in making the air moisture free.

Technical specifications:

Our range of heatless air dryers consists of the following parts: more...